Question about 2003 Toyota ECHO

1 Answer

How to replace control arm echo - 2003 Toyota ECHO

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 3,679 Answers

Follow this u-tube link , not the exact vehicle but will be the same for your vehicle
Toyota Lower Control Arm Replacement

Posted on May 15, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 55 Answers

SOURCE: When I replace the left front control arm should I

Yes because caster/camber and Toe can all be affected when you replace a steering or suspension part , also you have disturbed their location during the removal and replacement process, we are talking very small measurements but they are critical for good tire wear and vehicle handling .

Posted on Aug 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How would I replace just the lower ball joint on a 2002 Chevy Malibu


I list a lower ball joint available to purchase.
So you would have to disconnect the lower control arm from the spindle to replace the joint.

Oct 13, 2015 | Cars & Trucks

1 Answer

Code p0440 code p0441 code p0446on toy echo 2000 what is the diagnosis?


P0440 Evaporative Emission Control System Malfunction P0441 Evaporative Emission Control System Incorrect Purge Flow P0446 Evaporative Emission Control System Vent Control Circuit Malfunction
  • Remove and reinstall the gas cap, clear the code, and drive for a day and see if the codes come back.
  • Inspect the EVAP system for cuts/holes in tubes/hoses
  • Inspect for damaged or disconnected hoses around the Evap purge solenoid
  • Check and/or replace the sensor
  • Check and/or replace the purge valve
  • Have a professional use a smoke machine to detect leaks

Aug 19, 2011 | 2004 Toyota ECHO

1 Answer

Want to know the relationship between the rear trailing arm and the control arm. If you had the rear trailing arm fixed because of recall then 2 months later they say the control arm came loose and broke...


The recall for your vehicle may or may not have included replacement of the trailing arm. The recall says that the trailing arm is to be "inspected" then it will be replaced, or modified at the discresion of the person performing the inspection. If it was "replaced", it would require the control arms to be disconnected and reconnected. If it was only "modified" there would have been no disassembly of the control arms required. See the picture below. The picture shows the rear suspension parts. Notice that the upper control arm and the lower control arm bolt to the trailing arm. (which is what also houses the hub and bearing with the wheel speed sensor.) I hope this helps you to resolve your issue.

dttech_35.gif

Mar 08, 2011 | 2003 Hyundai Santa Fe

1 Answer

How to remove the rear arm wiper on toyota echo 2003 hatchback?


at the bottom of the arm where it joins the car there is a plastic cover you lift off and undo a 10 mm nut and the wiper comes off

Oct 26, 2009 | 2003 Toyota ECHO

1 Answer

My 2003 toyota echo passinger side mirror will not adjust it just falls forward. It is the type that is manual but has an adjustment knob inside the car. How do I replace it? The whole unit?


It sounds like you may have to replace the entire unit. There are rods inside the housing that connect to the back of the mirror itself. These rods are what allows you to control the mirror and are also what's suppose to keep the mirror stationery. It sounds like the clips have separated.

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Aug 28, 2009 | 2000 Toyota ECHO

1 Answer

When I replace the left front control arm should I


Yes because caster/camber and Toe can all be affected when you replace a steering or suspension part , also you have disturbed their location during the removal and replacement process, we are talking very small measurements but they are critical for good tire wear and vehicle handling .

Aug 24, 2009 | 2002 Toyota ECHO

1 Answer

Belt seems too short,already loosened alternator as much as possi


there is a bolt attached to the idler arm, if you get the right size socket and a good wrench, you have to pull the idler arm. it will pull the entire tensioner and the belt will be loose

Jun 19, 2009 | 2001 Toyota Echo

1 Answer

Echo 2003-


Your clutch on your Echo is hydraulically operated. There are 2 cylinders, one is connected to the clutch pedal, and the other is on the transmission clutch release arm. Hydraulic fluid operates the clutch. With this system, there are no adjustments. If your clutch is "slipping", a replacement may be in order.

Apr 06, 2009 | 2003 Toyota ECHO

2 Answers

2003 Toyota Echo heat not working. Fan, but no heat.


There is a valve on one of the heater hoses that allows heated water to flow through the heater core when you select heat. With heat selected and car warmed up check to see if both of the hoses feel warm. If not then water is not flowing through heater core and valve may need replaced or heater core is stopped up.

Dec 23, 2008 | 2003 Toyota ECHO

Not finding what you are looking for?
2003 Toyota ECHO Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...