Question about 1996 Chevrolet C1500

1 Answer

I have a 1996 chevy c1500. Where can I get a origional rear brake light wiring diagram?

It all started when the rear driver's side tail light wouldn't light up. The passengers side works like a charm. I've went ahead and changed out both 'Circuit boards' for the tail lights due to I had less than 3V at the brwn wire on the driver side. Now everything seems to be getting juice. but still no tail light. there has been a few splices in the wiring due to trailer light hook-ups. Its more less like a birds nest and Im intending on re-wiring the tail end if I can get the original wiring diagram. Any clues on where to get one of those?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 4,536 Answers

Library sec629

Posted on May 14, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: chevy venture

Solution to your problem ... 1- I purchased from 1aauto.com a pair of Circuit Boards for my Chevy Venture 2003 for 85.00 $ ..free shipping 2 - I Installed them both , all lights now were not working at all. So I checked them and they were all burned ...So I purchased new ones ....Everything was working fine now but now my signal lights were not working left and right .....Checked the fuse box next to the passenger side door .... It was burned . Changed the fuse / Signals are working fine now ....All is good I just did this yesterday evening August 12, 2008 Conclusion ..Change everything going forward so you do not need to run around like I did from one store to another!

  1. Circuit Board : New
  2. Bulbs : New
  3. Fuses : New
Thank you

Posted on Aug 12, 2008

  • 3 Answers

SOURCE: brake light will work but not running light in rear drivers side

change the bulb in the tail light. And check your fuses for the license plate.

Posted on Mar 20, 2009

  • 1 Answer

SOURCE: Only the left rear trailer light comes on when I apply the brakes.

I had the same problem with my 2002 Silverado last summer when I first bought my boat and was getting the trailer ready to go. Like an idiot, I rewired the boat trailer on that side before I decided to look at the owner's manual. The pickup has separate fuses for right and left side of trailer. They're located in the big box in the engine compartment. I replaced the 10 or 15 size fuse and haven't had a problem since. Hope this helps!

Posted on Apr 26, 2009

outdoorsman5
  • 631 Answers

SOURCE: 98 chevrolet silverado k2500 4x4 left rear brake light not workin

I have the full wiring harness for the exterior lights if you need it. Send me a email with a link to this posting and I will send you the diagram. outdoorsman592003@gmail.com

Posted on Sep 18, 2009

pops296
  • 174 Answers

SOURCE: 94 chevy wiring diagram rear lights

Check http://www.etrailer.com/faq-wiring.aspx.

Posted on Jan 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the tail light fuse?


The tail light fuse is under the rear seat on the drivers side.

Jan 17, 2016 | 2003 GMC Envoy

1 Answer

1996 chevy c1500 brake/tail lights


Bad Ground, check to make sure the grd. strap from firewall to engine is not broken and also the firewll to frame ,if one of these is broken or not tight it will cause the prob. you are having, also make sure the connector at the back drivers side where you would plug trailer harness in has a ground there also !

Feb 11, 2013 | 1996 Chevrolet C1500

2 Answers

I have no break lights or turn signals


Turn signal tail lights and BRAKE LIGHTS NOT WORKING


It can be faulty brake light switch causing the problem or its blown brake light bulb. First check and confirm brake light lamp is working and that's not the case.

For turn signal not working it can be faulty turn signal switch or its issue with wiring:----


==========

To trouble shoot brake and turn signal related problem, check the help links mentioned below:-----


Click the link:----
1996 Buick Regal Grand Sport Brake light Switch Location? http://schematicsdiagram.blogspot.in/2012/04/1996-buick-regal-gran-sport-brake-light.html

-----------
No brake lights on Buick? http://schematicsdiagram.blogspot.in/2012/04/no-brake-lights-on-buick.html

----------
Brake lights not working on 1989 BUICK REGAL?

http://schematicsdiagram.blogspot.in/2012/04/brake-lights-not-working-on-1989-buick.html

-------
How to replace Brake light switch on Chevrolet Tahoe?

http://technoanswers.blogspot.in/2012/02/how-to-replace-brake-light-switch-on.html

---------------
How to replace Parking, turn, and Brake Lights on car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-parking-turn-and-brake.html

----------
Upper brake lights work, but low brake light not working?

http://schematicsdiagram.blogspot.com/2011/12/upper-brake-lights-workbut-low.html

------------
1997 Cadillac Catera: How to replace Brake Light Switch?

http://howtobyme.blogspot.in/2012/06/1997-cadillac-catera-how-to-replace.html

------------


2003 Chevrolet S10 Tail light Fuse http://schematicsdiagram.blogspot.com/2012/11/2003-chevrolet-s10-tail-light-fuse.html

---------
Chevrolet Parking light and Tail lamp light Wiring diagram http://schematicsdiagram.blogspot.com/2012/11/chevrolet-parking-light-and-tail-lamp.html

----------
Car Tail Lights Not Working?

http://schematicsdiagram.blogspot.com/2011/12/car-tail-lights-not-working.html

----------
Turn Signal Not working http://technoanswers.blogspot.com/2012/11/turn-signal-not-working.html

----------
Right turn signal not working on Pontiac Car?

http://schematicsdiagram.blogspot.com/2011/12/right-turn-signal-not-working-on.html

--------
Only one side indicator light working on car?

http://schematicsdiagram.blogspot.com/2011/12/only-one-side-indicator-light-working.html

-----------
Turn signals not working on 1987 Jeep Wagoneer? http://schematicsdiagram.blogspot.com/2011/12/turn-signals-not-working-on-1987-jeep.html

1996 Chrysler LHS brake light circuit wiring diagram?

http://technoanswers.blogspot.in/2012/02/1996-chrysler-lhs-brake-light-circuit.html

----------
How to replace rear Brake lights on 2004 Toyota RAV4? http://schematicsdiagram.blogspot.in/2012/02/how-to-replace-rear-brake-lights-on.html

------------
One brake light on driver side not working, but other lights work?

http://schematicsdiagram.blogspot.com/2011/12/one-brake-light-on-driver-side-not.html

----------
2002 Lincoln Town car Fuse Box http://schematicsdiagram.blogspot.com/2012/11/2002-lincoln-town-car-fuse-box.html 2007 KIA Rio: Brake Light Fuse Box Diagram?

http://repairhelpcenter.blogspot.in/2012/06/2007-kia-rio-brake-light-fuse-box.html

-------------
Overhead Brake lights not working on 1999 GMC Sierra 4x4?

http://technoanswers.blogspot.in/2012/03/overhead-brake-lights-not-working-on.html

---------
2004 Ford Mustang: Brake light Fuse Location?

http://howtobyme.blogspot.in/2012/05/2004-ford-mustang-brake-light-fuse.html

---------

These will help.

Thanks.

Nov 24, 2012 | Cars & Trucks

2 Answers

1992 chevy pu no brake tail and turn lights what should I check fuses ok and bulbs


You will need the wiring diagrams to troubleshoot this, we do not have them here at fixya, sorry. They can be bought used here if you would like

Oct 16, 2012 | 1992 Chevrolet C1500

1 Answer

Diagram for wiring for break lights on rav4 1996


The AutoZone website may have a wiring diagram in the sites self help repair section.

If you have a voltmeter check for voltage and ground continuity at the bulbs. Check for voltage before and after the brake switch (operate the switch). If you don't have a voltmeter connect something up with a 12V bulb.

If you have voltage after the switch (when operated) but none at the bulb might check the brake/tail light sensor. This is the actual sensor box located in the trunk, drivers side. The sensor can fail resulting no brake lights.

There have been various posts at this forum on the sensor, suggest you do a site search to find these and review them.

But first start checking for voltage.

Apr 01, 2012 | 1996 Toyota RAV4

1 Answer

The headlights lights are working but the brake lights aren't. I suspect a bad fuse but don't have an owners manual, so I need a fuse panel diagram for a 1996 Chevy C1500. Got one?


no, sorry . but i do have a suggestion that might help. do the taillights work? if so check the brake light switch on the brake pedal. also , does the high mount light work and not the rear ones? if so you may want to check the turn signal switch to make sure there is voltage on that circuit.

Jul 28, 2011 | 1996 Chevrolet C1500

1 Answer

Need to know location of ecmon my 1996 chevy c1500 with a vortec 350


It is located under the hood on the drivers side right next to the fender. It's between the Fender and the Brake Control module. It's called the Vehicle Control Module (VCM) in this diagram.

dirus42_0.jpg

Dec 27, 2010 | 1996 Chevrolet C1500

1 Answer

I have a 1998 chevy c1500 and i just noticed that when i put my parking break on it makes my headlights go out and on my rear drivers side tail light will not work i have replaced the light and it still...


you have an e-brake switch shorted to ground the only light that goes on is the brake light on the dash when you engage the e-brake. check for fryed wires near the e-brake pedel and lever assy.

Sep 12, 2010 | 1998 Chevrolet C1500

2 Answers

Spongy brakes 1996 Chevy C1500


You can adjust the shoes outward on the rear by removing the wheels and drums, then above the axle but below the wheel cylinder you will see an arm that is horizontal, pushing both of the shoes outwards. There should be an adjustment nut that you can turn to extend the arm to push the shoes out.

Apr 22, 2009 | 1996 Chevrolet C1500

Not finding what you are looking for?
1996 Chevrolet C1500 Logo

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...