How to pull 2006 jeep liberty dash - 2006 Jeep Liberty

make sure the dash lights are not on the dim setting. The window switch runs its lighting from the dash light dimming switch as well. If all is ok, I would suspect a faulty window switch assembly

Should be labeled, but if not, just check them all.

Mine did this too....the latch kept getting stuck. If you put the key in the ignition and unlock the power doors, pull on the gate door (don't open it, just enough to release the latch), and it should come out so the hatch will latch.

I suggest scanned the computer in order to know what is the specific fault code stored there; note it and send us for other details.

You will find it bolted in to the hub assembly, behind the rotor, I believe you will need a 10mm wrench to remove it, pull straight up and out

On this website you find fuse box diagram and description for Jeep Liberty (2006)

https://www.carknowledge.info/jeep-liberty-2005-2006-fuse-box-diagram/
https://www.autogenius.info/jeep-liberty-2005-2006-fuse-box-diagram/

Sounds like defrost door on heater box is not work You need to get under dash and check controls on the box. Good luck

Turn on the signal and listen for the clicking noise. this is your flasher. locate it and replace it.

I have the exact same issue on my 2006 JEEP Liberty. Has anyone solved this?

usually when a dash light quits working it is a bulb that has burned out. you have to pull the dash and replace the bulb that is behind that has burned out. you can usuall find the bulbs at the auto parts store but some you have to get from the dealer. the auto part store sells some good repair manuals that should lead you step by step how to do it. if the book is sealed the cleark at the part store will usually let you open it to see if it has the details you are looking for. hope this helps.