Question about Cars & Trucks

1 Answer

Valve clearences 1998 Mazda E2000 van

I have the above van 2.0FE carb, dual fuel. Run on gas 98% of time.What is the correct gap setting as they require adjusting? Thanks

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Inlet 0.2mm ( 8 thou)
Exhaust 0.3mm ( 12 thou)

Link to PDF manual http://tinyurl.com/nr66fot

Posted on May 14, 2014

  • Perri Sapountzis May 14, 2014

    Hi
    Is that when cold or hot
    Thanks

  • Neil Harris May 14, 2014

    cold

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove or replace mazda e2000 speakers


I suggest you tube tutorials...they're step-by-step and you can find one on just about anything!

Jun 09, 2015 | Mazda Cars & Trucks

1 Answer

High idle when air con On 3000rpm


The IAC valve is controlled by the ECU. The IAC or Idle Air control valve, adjusts depending on information that the ECU receives from several engine related sensors. You need to look at everything that you can. Inspect all wiring and connections, around the engine. Look for damaged vacuum lines and if you know how to, look for air leaks going into the head. If unmetered air gets into the engine, bypassing the TAC unit. Then the ECU will not be able to make correct adjustments. Also look at the coolant level, temp, and condition. The long and short of it is that the ECU oversees the engine speed. Depending on different parameters, turning on the A/C sends a signal to the ECU that the engine load has been increased. Depending on other information (whether it is correct or not) the engine speed is increased to maintain engine speed. I hope this information helps but if not please write back. Be as specific and detailed as you can and I'll do my best, good luck.

Mar 15, 2014 | Cars & Trucks

1 Answer

Valve clearance


i need the head talk settings & valve clearance for tata indica lxi

Jul 05, 2013 | Mazda Cars & Trucks

1 Answer

I need the timing settings for 1984 mazda van E2000 it would be appreciated. Thankyou Graeme You dont seem to have the E2000, thats the one I need


I don't have a diagram on hand but are real simple. by memory cam and crank are both at twelve oclock. but try lookup ford econovan 2.0litre as thet are the same engine.

Mar 09, 2011 | Mazda B2200 Cars & Trucks

1 Answer

Masda e2000 84. need points gap to set.


.0016" is usually a good place to start. The gap will change when the dwell is set correctly. Make sure you are talking about breaker point gap and not air gap , as that is something else.

Apr 16, 2010 | Mazda B2200 Cars & Trucks

1 Answer

Mazda 6 fuel pump wiring dirgram


Mazda 2004 E2000 van had air metre replaced as it was burnt out, lost power so disconnected battery and reconnected 1hr later. Power did improve but now has slow pick up and very sluggish on hills. It is dual fuel ( petrol/lpg ) but is the same on both fuels.

Jan 07, 2010 | 2003 Mazda Mazda6

1 Answer

98 mazda b2300 truck wont start.fuel problem.


i would try replaceing the fuel filter frist.then i would un hook the fuel line and see if you got gas to the fuel filterthat will tell you if your fuel pumpis working or not . ok good luck

Apr 19, 2009 | 1998 Mazda Pickup

1 Answer

98 b2300 tr wont start how do i check fuel pressure?


there is a fuel supply pipe above the fuel injectors on the right of engine as u stand in front of the truck, on that pipe there is a valve that has a plastic cap on it, the valve looks like a metal tire valve, fuel pressure is checked there, you will need a test gauge to screw on the test port, about $15 at any Kragen or Autozone.

Apr 17, 2009 | 1998 Mazda Pickup

1 Answer

Stalling/ wont start


If you have fuel to the carb but it isnt delivering it to the engine, that can be due to a few conditions.
1. your needle valve or float could be stuck. next time you take off the fuel line, try spraying some carb cleaner into the inlet then GENTLY tap on the bowl. That may free it for the time being.
OR
2. your jets are clogged which wiould require you to dismantle the carb and at least clean it well inside.
A carb repair kit is inexpensive and dont be afraid if you have left over parts (you will) a complete carb rebuild is only for skilled technicians. You just want to take it apart and give everything a good hosing with carb cleaner, put the new needle valve in and gaskets on and reinstall.
Lucas oil products makes great fuel cleaners once you have it running again

Apr 06, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

1993 olds bravada 4.3L when outside temp is above 85 deg. engine misses at 65 and above when it is put to full throttle it runs fine vaccum leak ?


Well, it's really hard to tell what going on without actually seeing it, so you need to be the eyes here and I'll just name off some things that can cause irratic operation. (I'll go from least to most expensive)
Vacuum leaks is a yes. Check mounting bolts at the intake manifold for tightness. Make sure all vacuum hoses are connected and in good condition, look for dry rot or breaks.
It may need a tune up if you haven't done this in a while, make sure you set the spark plug gap correctly... which is .045' (models equiped with ECM System) .035' for all others .
This tune up would include plugs, rotor bug, distribitor cap and wires. For the price, you may want to replace the Coil Assembly, fuel and air filters also. Run a few bottles of injector cleaner through the gas tank and a bottle of "HEET" to remove any moisture and debriese.
I suggest you run the ECM (Electronic Control Module) in diagnostic mode to see if there are any codes stored. Use a Haynes Repair Manual to guide you through troubleshooting and repairs if needed. (Available at your local Auto Parts Store).
The Valve Settings and engine timing play a role in how the motor performs under stresses such as temperature and driving conditions. If the motor has alot of miles on it, wear and tear requires you may need resetting valve clearence lash and maybe replacing the timing chain and gear assembly.
(It's always lots easier to replace the timing chain and gear "before" it goes out completely)
Ok, guess the rest is up to you. I hope this helps, good luck!

Aug 10, 2008 | 1992 Oldsmobile Bravada

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...