Question about 1998 Pontiac Sunfire
Turn signal quit working.Where is the flasher located?
On the fuse panel under dash driver side it will more then likely be a round cylinder looking fuse.
Posted on May 16, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: flasher location
I believe the hazard/flasher relay is located under/left of the dash . I think if you remove the under panel under the steering column it should be attached to the BCM bracket under the dash on the left side.
Remove the left instrument panel (IP) insulator.
Remove the steering column filler panel.
Slide the hazard and turn signal flasher to the right, releasing the tabs from the Body Control Module (BCM) bracket.
Disconnect the electrical connector from the hazard and turn signal flasher.
Hope this helps.....
Posted on Jun 25, 2009
There are 2 flasher relays. One for the turn signals and one for the hazard lights. Turn Signal Flasher is located on the driver's side, under dash, mounted on upper passenger side of steering column support. Hazard Flasher is located same place only it is mounted on the driver's side of the steering column.
Posted on Apr 23, 2010
Testimonial: "Found it with no problem! Thanks!"
should be drivers side under dash,,u have to take the panel down,,its near the radio on the back side of the panel ,,some times u can turn ignition on turn signal on,,lesson for flasher,,to locate it,,hope it helped
Posted on May 28, 2010
Tips for a great answer:
Sep 24, 2014 | Cars & Trucks
Feb 18, 2013 | 1998 Cadillac Eldorado
Dec 01, 2009 | 1998 Chevrolet Malibu
Nov 02, 2009 | 2000 Pontiac Sunfire
Apr 03, 2009 | 1998 Pontiac Sunfire
Sep 22, 2008 | 2002 Pontiac Sunfire
Sep 02, 2008 | 1996 Lincoln Town Car
86 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: