Question about 2006 Chrysler Sebring

2 Answers

Blower fan has stopped working except on high

The air conditioning blower fan inside the car has stopped working on 1,2,and 3. will just work on high or 4

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The motor still works. A DC motor is speed controlled with a resistor. Luckily, the resistors that do this are mounted on the motor housing. See the following link. The resistor pack is quoted as costing about $10.
http://www.automotivehelper.com/topic294308.htm
Steve

Posted on Jun 29, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Fan motor bearings worn out, need to replace.

Posted on Jun 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heater/air conditioning blower fan makes high pitch noise


Above the passenger's feet, 3 bolts to loosen and it comes right out...

Jun 05, 2013 | 1994 Mercury Capri

1 Answer

Air condition and heat won't work


Check to see if you are getting voltage to the blower motor if you are the motor is bad if not check the fan speed switch. 1 2 3 or low medium high if you get voltage going to the switch but not from replace the switch if you have voltage from switch check the blower motor resistor the although with the blower resistor you commonly have a high fan speed in the max setting and the lower speed settings don't work wich would make you think 1 2 3 are not working but 4 is. That is why it is best to check all parts to make sure the part you do replace needed to be replaced

Oct 15, 2012 | 2000 Ford Focus

1 Answer

01- Dodge Caravan AC Heater Control it only works on high none of the speeds work when I rotate the switch from low to high. Is this a swith problem or a motor problem?


Most likely neither. The most common cause is that an electrical device called the blower motor resister block, has failed. This device provides all the slower speeds. It is generally mounted in the HVAC [Heating, Ventilation & Air Conditioning] box, very close to the blower motor. FYI, we mechanics call the fan motor inside the cabin the blower motor. The electric fan motor behind the radiator is called the cooling fan motor.
If the resistor block is OK, then you have either a bad fan speed switch or a melted electrical connector at that switch. 95% of the time, the resister block is the problem.
Charlie

Aug 22, 2011 | 2001 Dodge Grand Caravan

2 Answers

The AC on my 2002 chevy S 10 just suddenly stopped blowing cold air. The freon is full and the compressor is coming on. Any advice would be helpful in this Texas heat. Thanks


If the freon is full and the compressor clutch is working,is the blower working, need more details, if it is, you could have a blocked orifice filter. or a bad high pressure switch located at the rear of the compressor.if the high pressure switch loses voltage or goes out, your cool air will come to a dead halt. check the high pressure switch for voltage. good luck!

Aug 08, 2011 | 2002 Chevrolet TrailBlazer

2 Answers

Fan (blower for interior) only works on high setting all other settings basically turns the fan off. Air conditioning still works. There is not air flow at all on the settings (other than high) when the...


The fan speed resistor is the problem........when you are on full speed the current bypasses the resistor and this is what gives you the fastest speed from the fan motor.......on 1, 2, or 3 speed setting, it is directed through the fans speed resistor circuit

It is located in the air box behind the glovebox on the interior of the car passenger side

Aug 30, 2010 | 2000 Toyota Camry

2 Answers

Blower fan stops on lower speeds 2000 grand marquis


There is a blower realy. Which steps the voltage up or down. If it fails it will run 12 volts or HIGH speed only... Replace that and your good.

Jun 28, 2009 | 1993 Mercury Grand Marquis

3 Answers

Hyndai Sonata air conditoning blower only works on high


I agree with 'motgor1258'... replace the blower resistor (it's actually a power transistor).
ea7d1d5.jpg

Jun 19, 2009 | Hyundai Motor 2004 Sonata

1 Answer

Air condition fan only works on high speed, no low speed


You have a bad blower motor resistor. This is located under the dash close to the blower motor itself

Apr 14, 2009 | Chevrolet Colorado Cars & Trucks

Not finding what you are looking for?
2006 Chrysler Sebring Logo

387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...