Question about 2008 GMC Envoy

1 Answer

What does it mean when the Stabiliytack Off message is displayed and what do i need to do to fix it.

Posted by on

  • Stephanie Stroud
    Stephanie Stroud May 14, 2014

    My truck will cut off. The first time it cut I was at a stand still. The next time it cut off I had just pulled off from a stop sign and it cut off just as I got in the road.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • GMC Master
  • 12,744 Answers

This gm s stability control for vehicles their are sensors and controller --what it does is acts like your abs system it keeps vehicle on path if going into a corner to fast will sense it and apply enough brake to slow so wont slide or excessive roll in vehicle ---problems can be a stablitrack sensor--abs sensor-- bad hub---bad suspension part--out of alignment these can cause a check light ----you probably wont feel any difference in you ride

Posted on May 14, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does it mean when my 2008 trailblazer LT stabilitrac service light comes on?


Service Stability System Message The message center displays the service stability system message when any one of many VSES-disabling DTCs is set. The EBCM sends a serial data message to the IPC requesting this display.
It means there is a problem an till you get it fixed the stability control system is disabled ! ( EBCM ) electronic brake control module Has detected a problem an set a DTC - diagnostic trouble code in it's memory an had the message displayed !
Vehicle Stability Enhancement System (VSES)
The vehicle stability enhancement system (VSES) provides added stability during aggressive maneuvers. Yaw rate is the rate of rotation about the vehicle's vertical axis. The VSES is activated when the electronic brake control module (EBCM) determines that the desired yaw rate does not match the actual yaw rate as measured by the yaw rate sensor.
The desired yaw rate is calculated by the EBCM using, primarily, the following inputs.
?€¢
The position of the steering wheel


?€¢
The speed of the vehicle


?€¢
The lateral, or sideways acceleration of the vehicle

The difference between the desired yaw rate and the actual yaw rate is the yaw rate error, which is a measurement of oversteer or understeer. When a yaw rate error is detected, the EBCM attempts to correct the vehicle's yaw motion by applying brake pressure to one or more of the wheels. The amount of brake pressure which is applied varies, depending on the correction required. The engine torque may be reduced also, if it is necessary to slow the vehicle while maintaining stability.
VSES activations generally occur in turns during aggressive driving. When braking during VSES activation, the pedal may pulsate. The brake pedal pulsates at a higher frequency during VSES activation than during ABS activation.


It

Jun 19, 2015 | 2008 Chevrolet Trailblazer

1 Answer

What does the error message "cruise box" mean?


This is a new one on me ,i can only assume it means something wrong with the cruise control ,i would need to see the car to have any idea at all to be honest my one doesnt display any messages but it is a older model

Apr 14, 2015 | 2002 Jaguar X-Type

1 Answer

My cd player of my suzuki swift will not play my cds it keeps displaying error 1 what does this mean?


CD PLAYER PART OF RADIO NEEDS TO BE FIXED BRING TO CAR INSTALLATION PLACE TO SEE IF THEY CAN FIX CD PLAYER IF NOT JUST BUY A NEED RADIO THERE FOR ABOUT 200.00

Jan 25, 2015 | Suzuki Swift Cars & Trucks

1 Answer

What does the dash board red lights mean


On the X-Type dash display,

Located above the message center are two lamps, red for warning and amber for caution. When a message is displayed, the appropriate lamp will illuminate to attract the driver's attention and to signify the importance of the message.

Jun 13, 2014 | 2006 Jaguar X-Type

1 Answer

Got a display message "Reduced Engine Power" the


When you receive this message it means that the computer has put the engine and components into protection mode. This computer has done this to prevent any further damage to the engine or transmission. You have to have the computer of the vehicle scanned to find the problem then you need to get it fixed right away. It could be a number of different causes overheating,Low Oil Pressure,Transmission pump problem, low coolant level, low oil level. Their is really no way of telling from this end without seeing the vehicle.Start by checking all fluid levels, Oil,Coolant,Transmission.If all this is good scan the computer with a OBII scanner or take it to a garage and get it scanned. It may just be something simple or it could be something very serious.Do not drive the vehicle it is worth the cost of a tow truck to prevent further damge if you can not determind the cause and fix it yourself.

May 09, 2011 | 2004 Chevrolet Tahoe

1 Answer

What does code ccd mean on overhead display 1997 dodge ram 2500 diesel 4x4 automatic?


It means "Crystal Clear Display" but in basic term its called a ccd bus, basically the OH console module is not communicating with body control module so you want to check power and ground pins or you just might have a bad module, sorry.
A self-diagnostic test is used to determine that the
compass mini-trip computer module is operating
properly electrically.

CCD communications test.
Following completion of these tests, the compass
mini-trip computer will display one of three
messages: “PASS,” “FAIL,” or “CCd.”

if the “CCd” message is displayed, the use of a
DRBt scan tool and the proper Diagnostic Procedures
manual are required for further diagnosis.


Jun 30, 2010 | 1997 Dodge Ram 2500 Club Cab

1 Answer

Message window says "transmission service required" whats it mean


If it says to service it, then it needs servicing.

Feb 24, 2009 | 2001 Volvo S60

1 Answer

2007 cayman service now message display AFTER 20,000 mile service


Post your problem on pelicanparts.com in the forum for your model car, great help there.

Jim

Jun 10, 2008 | 2007 Porsche Cayman Coupe

Not finding what you are looking for?
Cars & Trucks Logo

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...