Question about Mazda MAZDA6

Open Question

Engine won't rev over 1500rpm

Engine light on

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ronaldo_ross
  • 1056 Answers

SOURCE: no accelerator, engine revs between

Always turn the other car first before connecting the cables, otherwise the computer can be damaged. Try disconnecting the battery for five minutes, then connect them again and start the engine. Hopefully this will restore normal operation.

Posted on Nov 14, 2009

paparoach196
  • 8 Answers

SOURCE: The engine sounds over rev.. Its rev is in 1500rpm. How do i sort it

sounds like a vacuum leak, check all vacuum lines for leaks and replace as needed.

Posted on Aug 10, 2014

jmmstks2
  • 10 Answers

SOURCE: no accelerator, engine revs between

Check your Throttle intake, it might be dirty or sticking. Check your vacuum hoses

Posted on Feb 05, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hw can i fix toyota hilux d4d 3000,2006 model cannot rev over 1500 revs


There are alot of factors that could prevent the engine from revving over 1500RPM. Some sensors like the crank angle or cam angle have to be connected in order for the engine to even start, other wiring loom plugs like the turbo controller need to be connected or the car goes into limp mode and it won't rev past a certain point.

Then there are the automatic throttle controller area wiring loom type plugs near the inter cooler, sometimes people forget to put them all back and the engine won't rev high. Making sure the vacuum pipes in this area are all connected properly, one unplugged pipe, no vacuum, the injector pump relies on the vacuum system and if it doesn't work then not enough fuel delivery, engine can't rev high. Also if the fuel rail is leaking or if the fuel filter is clogged then engine won't rev high.

Feb 26, 2015 | 2006 Toyota Hilux 3.0

1 Answer

2007 toyota hilux 2kd, starts nicely revs to 1500rpm then misfires for a few seconds then revs up ok. once you deaccelerate the problem persists. no check light is on, no fault code what so ever. please...


cud be a vacuum leak like a bad egr valve--usually noticed at decel and clears at higher speed--not an xpensiv item--but bring car private shop not dealer

Jan 19, 2015 | Toyota Cars & Trucks

1 Answer

Jaguar will not


Try the "clear flood" method. Hold gas pedal to the floor and crank the engine over till it starts and builds rpm and make sure you release the gas pedal in time so that you don't over rev. the engine. Then feather the pedal trying to maintain 1500rpm for one minute then let idle .

Dec 21, 2013 | Cars & Trucks

1 Answer

The engine sounds over rev.. Its rev is in 1500rpm. How do i sort it


sounds like a vacuum leak, check all vacuum lines for leaks and replace as needed.

Nov 20, 2012 | Cars & Trucks

1 Answer

While driving my 2005 ram 2500 my oil gauge will go down to low and check gauge light comes on, so I pull over immediately then re-start engine and oil works agin for a while and then it happens again, I...


I would stop driving it right away and test the oil pressure with a gauge. If at an idle when its cool you don't hit 30-40 psi....change the oil pump. The knocking is probably your main bearings. While your installing a new oil pump, put new mains in.

Apr 03, 2010 | 2005 Dodge Ram 2500 Truck

2 Answers

No accelerator, engine revs between


Always turn the other car first before connecting the cables, otherwise the computer can be damaged. Try disconnecting the battery for five minutes, then connect them again and start the engine. Hopefully this will restore normal operation.

Nov 14, 2009 | 2003 Mercedes-Benz CL-Class

1 Answer

Engine idles at 1500rpm & check engine lamp comes on after 5 sec


Try removing the Idle rev valve and cleaning it with carburettor cleaner.

Nov 17, 2008 | 2001 Daewoo Lanos

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...