Question about 2002 Ford F350 Super Duty DRW Reg. Cab

Open Question

How to remove the transfer case of ford F350

I need to change the transfer case

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
wyatt1582
  • 453 Answers

SOURCE: won,t shift transfer case into 4wheel drive

Is the truck on the fly 4X4 push button or is there a lever on the floor you pull into 4 wheel drive? Located on the back of the transfer case not hard to change few bolts and a wire harness. Does the front drive shaft turn when you put it in 4x4 and the front wheels won't ingage? If so then its not your transfer case its the actulator on the front axle at the gear hub or pumpkin it will have two 10mm bolts and a black plastic cover if so remove cover and spray actulator shaft with wd-40.

Posted on May 21, 2009

Ad
  • 32 Answers

SOURCE: I have a 1992 Ford F350 7.3 diesel which is

id repbuild cuz your bearings have probly sent fragmens into it

Posted on Sep 20, 2009

  • 1 Answer

SOURCE: location of fuel pump on 1988 Ford F350 460 engine

there could be 2. one is in the tank,this one is there for sure. the other is in the frame rail ahead of the switching valve,if you have 2 tanks.Otherwise look for a cylinder with fuel lines and 2 wires.the fittings on inline fuel pump might take a special tool,they will look like a bell.that tool can be bought at parts store, should be under $15.

Posted on Jul 13, 2012

  • 61 Answers

SOURCE: in a 2000 ford expedition does the cross member

First you need to measure the height from the ground to the frame on each side on level ground. Write those numbers down. If you follow the torsion bars to the crossmember, you will see arms or levers attached to them. Counter clockwise will lower them. Remove the bolts, then the torsion bars then the crossmember.

Posted on Aug 21, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transfer case will not disengage


If you have a gear stick to do the changing check underneath for mud build-up or a stick or stones preventing changing. If you have electric buttons the changing is done by a solenoid activated unit. Most are vacuum operated so check for power supply to unit or a blockage in the vacuum line

Jan 07, 2013 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

I have a 2005 ford f 350 that we did a frame change. Now the tow haul light flashes an we have limited power.


check conection at transmision and transfer case make sur all pin are clean and straight
also corect oil is in mercon sp only for this automatic nothing else
just finish doing one for a freind landed up improper conection over transfercase

Nov 29, 2010 | 2004 Ford F350

2 Answers

I need to converd my 2wd 1999 ford F350 into a


Yes, it can be done, but it will be highly expensive as it will be necessary to replace the gearbox and the front axle and to add a transfer box , a cardan shaft and all the commands. In the end it will be cheaper to just sell your 2WD and buy a same year 4WD.

Jun 22, 2010 | 1999 Ford F350 Regular Cab

1 Answer

How to replace tranfer pump on ford f350 7.3


IF YOU GOT A MECHANICAL TRANSFER PUMP YOU NEED A FLARE NUT WRENCH TO LOOSEN THE THREADED FUEL LINES.LOOSEN THE MECHANICAL TRANSFER PUMP BOLTS ONE OR TWO TURNS.MOVE THE PUMP BY HAND TO BREAK THE GASKET SEAL.USING A REMOTE STARTER SWITCH OPERATE STARTER TO ROTATE THE CRANKSHAFT IN SHORT BURSTS UNTIL THE FUEL PUMP CAM IS AT IT LOWEST POSITION.WARNING STAY CLEAR OF THE FAN AND DRIVEBELTS.DISCONNECT THE FUEL LINES FROM THE FUEL PUMP.REMOVE THE FUEL PUMP MOUNTING BOLTS AND REMOVE THE PUMP.THE ELECTRIC TRANSFER PUMP.TURN OFF RADIO FIRST THEN DISCONNECT THE NEGATIVE BATTERY CABLES. DETACH WIRES FROM THE PUMP.DISCONNECT THE FUEL INLET AND OUTLET LINES FROM THE PUMP AND PLUG THE LINES TO PREVENT CONTAMINATION AND LEAKAGE.LOOSEN PUMP MOUNTING BRACKET AND REMOVE THE PUMP.THE ELECTRIC TRANSFER PUMP LOCATED ON THE ENGINE MOUNT NEXT TO STARTER.THE MECHANICAL TRANSFER PUMP LOCATION IS ON THE RIGHT PASSENGERS SIDE OF THE ENGINE LOW AND NEAR THE FRONT.

Jun 11, 2010 | 1997 Ford F350 Crew Cab

1 Answer

What does the 20amp fuse number 111 do in a ford f350 powerstroke superduty truck


for 2003, F2-111 is for the transfer case low to high relay and high to low relay.

Aug 24, 2009 | 2004 Ford F350

1 Answer

Won,t shift transfer case into 4wheel drive


Is the truck on the fly 4X4 push button or is there a lever on the floor you pull into 4 wheel drive? Located on the back of the transfer case not hard to change few bolts and a wire harness. Does the front drive shaft turn when you put it in 4x4 and the front wheels won't ingage? If so then its not your transfer case its the actulator on the front axle at the gear hub or pumpkin it will have two 10mm bolts and a black plastic cover if so remove cover and spray actulator shaft with wd-40.

May 19, 2009 | 2008 Ford F-350

2 Answers

How do you change glow plugs in 06 f350 powerstroke? where is /are speed sensors on 06 f350 superduty powerstroke


remove the inner wheel wells or cut it back to get some access its tight that way though i would just remove the two of them its 10& 11 mm on the top sidde just let everthing hang , it is either 5.5 mm or a 7 mm . the speed sensor is in the transfer case for the 4x4 or on theh rear on the trans for 2wd

Feb 18, 2009 | 1995 Ford F350

Not finding what you are looking for?
2002 Ford F350 Super Duty DRW Reg. Cab Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...