Question about 2000 Toyota Celica
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2001 Toyota Celica GTS Clutch
i paid a friend to do it because it's a lot of work! if you haven't already treid to or got it done just know that when my friend did it; it took him like 8 hours (he'd never done one on a celica, but had done them on american cars) so if your not familiar with it... not a good idea to do alone. I watched him do most, but i'm not the best to talk to about it.(plus i have a 2000GT) Some of the parts that i can remember that he took out to get to the clutch were the front driver's side tire, the axel on the same side, ....some other parts in there....and ALSO parts on top...the intake also had to be taken out just to have enough room to do the job. parts are cheap...just ask for a clutch kit at auto zone or whatever. around $150. another random tid bit that might help is make sure to tighten the engine mounts really good afterwards or else it will jump around in there when you turn it on and cut it off. buy gear oil before you start as well because you will need to put some in after the new clutch is in. i will need to put the car on a real lift... you need a lot of space underneath and on top to work. and most likely two people. well hope some of this helped.
Posted on Sep 06, 2008
SOURCE: fuel pump for 2000 toyota celica
Yes, remove the rear seat cusion and then lift up the padding. Take the screws out of the cover and them you can access the top of the fuel tank and remove the pump and fuel level sending unit.
Posted on Mar 02, 2009
for your first problem its a camshaft position sensor and to fix it you have to replace it. It causes the lift problems with the 2zz-GE engine. For your second problem here is the link to diagnose the problem.
Posted on Aug 03, 2009
nothing try back flushing heater core, they clog up due to litle water preasure,you might want to flush cooling system if you already havent, hope this hleps.
Posted on Oct 06, 2009
I had the same problem and I drilled out the rivets...it does work after giving it a little time. You will be able to drill all the way through the rivet and then pull it out. You'll have to order a new hinge or door and reinstall the rivets. Can go to Harbor Freight Tools and get a rivet tool with rivets if you don't have one. They're not expensive.
Posted on Jun 29, 2010
Tips for a great answer:
A no-start condition can occur with several different symptoms. Have a clear understanding of which one applies to your vehicle when having the problem diagnosed.
Here are the most common symptoms:
Nov 14, 2012 | Cars & Trucks
Apr 11, 2012 | 2000 Toyota Celica
Apr 28, 2010 | 2000 Toyota Celica
Oct 06, 2009 | 2000 Toyota Celica
Sep 07, 2009 | 2000 Toyota Celica
Jul 14, 2009 | 1997 Jeep Grand Cherokee
Mar 22, 2009 | 1985 Toyota Celica
Dec 09, 2008 | 2000 Toyota Celica
28 people viewed this question
Usually answered in minutes!