Question about Chevrolet Silverado 1500HD

Open Question

2003 chevy 1500 thermostat housing torque - Silverado 1500HD Chevrolet Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

suterman
  • 158 Answers

SOURCE: thermostat location 2001 chevy silverado 1500

The thermostat is in the hose on the passener side of the waterpump.It is in the part that has the three 10mm bolts.Please rate my answer, Thank you.

Posted on Mar 05, 2009

  • 4 Answers

SOURCE: what is the torque specifications on a 1995 chevy

transmission to engine is 32ft lbs but is normaly tighten alot tighter you can't screw this up tighten really tight

Posted on May 08, 2009

drsinister69
  • 2317 Answers

SOURCE: 2003 Chevy monte carlo 3.4L, need the torque

Check Autozone.com. There repair section should have the torque specs and order of tightening.

Posted on Mar 06, 2010

  • 432 Answers

SOURCE: torque specs for 1995 chevy 1500

Pinion seal nut. GMC Axle 270 Ft Lbs. Dana Axle 255 Ft Lbs.

Posted on Mar 17, 2010

johnjnail
  • 1702 Answers

SOURCE: what is the torque specs

first pass 11 ft lbs. second pass 22 ft lbs.

Posted on Jan 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the thermostat located on a chevy v6 4.3 vortec


Follow upper radiator hose to engine. The metal housing hose goes to is the thermostat housing.

Feb 10, 2015 | Cars & Trucks

1 Answer

What are the torque specs for a 2003 Chevrolet trailblazer thermostat housing?


The 2003 Chevrolet Vortec 5300 generated 285 horsepower at 5,200 rpm and 325 ft.-lbs. of torque at 4,000 rpm. --------------------------------------------------------------
VVDI VAG Vehicle Diagnostic

Mar 26, 2013 | Cars & Trucks

1 Answer

What are the 2 ground wires going to thermostat housing on 1990 chevy 1500


They are engine grounds for all electrical components on the engine, the engine sits in rubber so it needs this type of ground.

Oct 15, 2012 | Cars & Trucks

1 Answer

What is the torque spec for the front center axle nut on a 2003 tahoe?


The torque specs.are for 15k series trucks is 155 ft.lbs.For 25/35 series it`s 133 ft.lbs.Hope this helps.Good luck.

Dec 03, 2011 | 2003 Chevrolet Silverado 1500

1 Answer

I need to replace a thermostat in a 2000 Chevy 2500 6.0 liter pickup


4.8L, 5.3L and 6.0L Engines To Remove:
CAUTION
The thermostat is not serviceable separately. The thermostat housing (water pump inlet) and thermostat must be replaced as an assembly.
  1. Remove the radiator outlet hose. chevy_aval15_02-04_inlet.gif

  2. Remove the bolts from water pump inlet.
  3. Remove the water pump inlet from the water pump.
To Install:
  1. Install the water pump inlet to the water pump.
  2. Install the water pump inlet bolts.
    • Torque to: 11 ft-lbs. (15 Nm)
  3. Install the radiator outlet hose.
6.6L Engine To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Drain the engine coolant.
  3. Remove or disconnect the following:
    • Water outlet 6.6L Thermostat housing removal gm_trk_sil25_02-04_66_therm_hous_rem.gif

    • Bolt for the fuel line bracket
    • Thermostat housing cover bolts
    • Thermostats and seals
To Install:
6.6L Thermostats and seals gm_trk_sil25_02-04_66_therm_seal.gif

  1. Install or connect the following:
    • Thermostats and seals to the thermostat housing NOTE: The rear thermostat (D) has 2 vent valves. Install with the vent valves towards the rear of engine.
    • Thermostat housing cover with a NEW gasket
    • Thermostat housing cover bolts and tighten the bolts
      1. Torque to: 15 ft. lbs. (21 Nm)
    • Fuel line bracket bolt and tighten the bolt
      1. Torque to: 15 ft. lbs. (21 Nm)
    • Water outlet
  2. Fill the engine with coolant.
  3. Test drive the vehicle to confirm the repairs.
8.1L Engine To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Drain the cooling system.
  3. Remove or disconnect the following:
    • Inlet hose from the water outlet Water outlet and thermostat removal chevy_sub25_02-04_60_thermost_rem.gif

    • Water outlet bolts (B)
    • Water outlet (A)
    • Thermostat (C)
To Install:
  1. Install or connect the following:
    • Thermostat
    • Water outlet
    • Water outlet bolts and tighten the bolts.
      1. Torque to: 22 ft-lbs (30 Nm)
    • Inlet hose to the water outlet
  2. Fill the cooling system.
  3. Test drive the vehicle to confirm the repairs.
prev.gif next.gif

Jan 12, 2011 | 2000 Chevrolet 2500

1 Answer

Change theromstat 2003 chevy venture


Thermostat Removal & Installation To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Partially drain the coolant, (until the level is below the thermostat).
  3. Remove or disconnect the following:
    • The air cleaner and duct assembly
    • The crossover exhaust pipe
    • The radiator hose from the thermostat housing
    • The thermostat housing bolts
    • Any remaining sealer from the bolt threads gm_mv_ven_tstat.gif

    • The thermostat housing
    • The gasket
    • The thermostat
To Install:
  1. Install or connect the following:
    • The thermostat
    • The thermostat housing
    • The gasket NOTE: Apply RTV sealer, GM P/N 1052366 or the equivalent, to the thermostat housing bolt threads.
    • The thermostat housing bolts
      1. Torque to: 18 ft. lbs. (25 Nm)
    • The radiator hose to the thermostat housing
    • The crossover exhaust pipe
    • The air cleaner and duct assembly
    • The coolant
  2. Thoroughly inspect the cooling system for leaks.
prev.gif next.gif

Nov 05, 2010 | 2004 Chevrolet Venture Passanger

1 Answer

How to replace a Thermastat on a 2003 Chevy silverado 2500 HD


The thermostat is located in the water pump on mostn never Chevy trucks. If you pull the upper fan shroud, you should see the thermostat housing. Remove the radiator hose, then the 2 bolts for the housing. Replace the thermostat, and gasket together.

Feb 17, 2010 | 2003 Chevrolet Suburban 1500

1 Answer

Replace thermostat on 95 chevy silverado 6 cyl.


Drain coolant first,remove the thermostat housing bolts,clean gasket surfaces,install the new thermostat and gasket.Tighten the thermostat housing boltsto 21 ft.lbs.(28Nm).Refill with coolant start the engine and check for leaks.

Jan 10, 2010 | 1999 Chevrolet Silverado 1500

2 Answers

Front Hub Bearing Torque specs to complete replacement


THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Apr 24, 2009 | 2003 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...