Question about 2007 Honda Civic GX NGV Sedan

Open Question

How to reset factory alarm in 2007 civic with valet key

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
aroostookb
  • 98 Answers

SOURCE: i can't find the valet switch on my 2001 Honda Accord

Look under dash above brake pedal......it should be mounted there. Or in some rare cases can be taped into wire harness .....not on lower edge of dash.

Posted on Jun 23, 2009

Ad
  • 389 Answers

SOURCE: Honda civic 2004: the car alarm (factory

This may sound really dumb but have you tried shutting the alarm off with the remote before turning the key? I am sorta wondering if your key is worn out and the alarm system reads it like someone putting a screw driver in there to unlock it. Just a thought. I am guessing here so please be gentle on me. Raz

Posted on Apr 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Tundra security system will not reset has shut down everything and will not crank. Tried the key in the door, key in ignition, searched for a valet button or toggle, nothing. No valet button


this year model did not come from the factory with a security system but many were installed at the dealer, is there a button under the steering column? if so i recommend you delete the alarm, if you ever have issues with the battery this will happen again. follow the wiring from the red light to the alarm control module and unplug the main clear connetor from the unit, also at the ignition switch you would have to unplug the ignition switch connector from the wire lead that goes to the alarm and reconnect the trucks factory connector to the igniton switch to take the ignition out of the alarm circuit

Feb 22, 2017 | Cars & Trucks

1 Answer

1995 blazer disconnected battery now alarm set, going off , no key fob. How do i reset?


that truck dont came whit factory alarm you have an aftermarket alarm unde the dash on the driver side you goint to find a small switch is the valet switch press the switch and turn ignition switch to on position that discobnect the alarm

May 22, 2015 | 1995 Chevrolet Blazer

1 Answer

How do I reset alarm 2001 honda civic


Have you tried using the valet override, [disarm without remote] switch?

Have you checked to make sure remote start switch is on?

Oct 26, 2012 | 2001 Honda Civic

2 Answers

I had to change the battery. After replacing the new battery all systems work, but the car won't turn over and the factory alarm is blaring. How do I disable the factory alarm? I do not have the...


Hi,
If you have the Toyota factory alarm, there should be button under the driver's side dash to reset the alarm....Look for it 1st, then read below.

Put the key in the ignition, and turn forward
all the way just before cranking, to the ON position.

Then within 5 seconds, locate, press and hold in the
valet/overide button, found under the
dash area, (push button, spring loaded)
until the installed LED (the blinking light)
in your dash area goes on solid,
and the siren chirps once.

(Your valet switch might be the toggle
(on/off) type. in this case, key on,
flip switch in opposite direction,
then turn the key off.)

This should reset the alarm, and reset
the grounded relay on the starter wire,
allowing you to start the engine.

At this point, the only thing working would
be the keyless entry from the alarm,
if it came equipped that way.

Just Repeat these steps to place it
back to usable armed mode.
You may get 2 chirps, confirming it,
and the lights may flash twice as well.

GL,
Td

Aug 10, 2010 | 1997 Toyota Camry

1 Answer

I just bought a 2007 mkx and my son locked the keys in the car and we haven't reset the code yet. how do i unlock the car?


You don't have two keys and a valet key?

Give the VIN to the dealer,and they should get you a key or factory Keyless Entry Pad Code

May 26, 2010 | 2007 Lincoln MKX AWD

2 Answers

Lost remote to alarm on 1996 honda civic need to change battery


I had this happen today and called an alarm installer. he said to connect the battery cable (id unhooked it to stop the blaring) then open the door to set off the alarm. then torn on the key ( even tho it wont start the car , turn it on anyway) then look for a toggle switch ( AKA a valet switch) with the key in the on position flip the switch. ( when I did this a noticed a tiny red light come on to the left of the steering column) I turned the toggle back to the original position and then I tried to crank -AND IT CRANKED WITH NO SCREAMING ALARM!!! I was so happy, I had to post this in case it could help someone else.

Jun 10, 2009 | 1996 Honda Civic

1 Answer

Reset keyless entry on 1998 honda civic


Okay, here goes-

1. Turn Key to on position.
2. Push and hold **valet button on the stock radio.
**Valet button is skinny bar located between am/fm & cd/tape buttons on stock radio.
Door locks will cycle one time.

3. Press any button on remote one time within 20 seconds. Door locks will cycle again.
4. To program up to 4 additional remotes repeat step 3 for each additonal remote.
5. Turn key off programming is complete.

Thanks for using Fixya, please rate if this helps :)

Mar 16, 2009 | 1998 Honda Civic

1 Answer

Factory alarm


Sounds like it has an after market alarm in it? Some times you can unhook the battery and then put the key in the ignition and turn it to the on position and them hook up the battery with the key on and this will clear the alarm. If it is a factory unit you may be able to use the key in the door locks to shut it off or try the same thing as the aftermarket reset.Don't short anything that can fry things. If it is a factory alarm with keyless entry, you should buy a key fob and program it and avoid future problems. You can program this by cycling the key on and off either 6 or 8 times, ( can't remember) and the door locks will lock and unlock on thier own to let you know you are in program mode push the lock button on the remote and it will lock and unlock again to let you know it is programed. Hope this helps....Dan

Jun 13, 2008 | 1997 Ford Ranger SuperCab

Not finding what you are looking for?
2007 Honda Civic GX NGV Sedan Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...