Question about 2010 Toyota Corolla

Open Question

What is the cause of toyota corolla bend valve?

I packed the vehicle the following day when i want to start the vehicle it could not start.when the mechanics open the top cover they discover two valves were bent.please advice what is the causes?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1861 Answers

SOURCE: 1997 Camry Valve Cover Gasket Replacement

Removal of the plenum is pretty straight forward. You will need to replace the plenum gasket after you remove it; the gasket is not reusable. Personally, if I was going to take the trouble to remove the plenum, I would replace the plugs and wires back there, also.
I know, I have a 93 Camry V6, and it is a real pain to do the plugs and wires with the plenum on. There are no secrets or great tips on the plenum removal, just take your time. Remember that there are different size bolts, and where they go. Please get back to me if you need any more info...Hope this helps, and thanks for choosing FixYa to resolve your issue.
The graciousness of a FixYa rating for my assistance would be greatly appreciated.

Posted on Dec 15, 2008

Ad
  • 101 Answers

SOURCE: removing valve cover toyota camry

You need to pull the plug wires up and out of their tubes. They can get stuck so twist them left and right to help loosen them first. The plugs are in the tubes. Use a 5/8 plug socket to remove them. Around the tubes you will see large flat nuts. You will need to remove all 4 of these. Also on the top timing belt cover there are 2 10mm head bolts you will need to back out at least 1/2 way for 2 reasons. 1 to free up the wire harness that crosses there and the bolts extend over the valve cover blocking its removal. Then with a screwdriver pry up the metal washers and rubber seals that were under the large flat nuts. The pcv valve needs to be pried out of the valve cover in the center and then the cover will come off.
Reverse to install.

Posted on Apr 20, 2009

  • 2 Answers

SOURCE: 2001 Toyota Corolla lifter noise

Check your timing or could be timing belt out of 1 tooth. This model of corolla does not use lifter.

Posted on Jun 10, 2009

MauiRentaCar
  • 288 Answers

SOURCE: Toyota Corolla DX 97 Engine Light EGR valve PLEASE HELP

You can try cleaning the EGR valve and passages with Seafoam. A bottle costs just a few dollars at any auto parts store or discount store. With the engine running, squirt/spray it in through the brake booster hose, or through the PCV hose. This will cause smoke to come out the exhaust. This is normal and will disappear after a few minutes. If Seafoam does not do the trick, then you can still disassemble the EGR valve from the throttle body and clean it with throttle body cleaner.

Frank
Frank's Friendly Cars Maui Car Rental
www.mauicarrental.biz

Posted on Sep 12, 2009

  • 1 Answer

SOURCE: 1996 Toyota Corolla Valve Cover leaking oil

i have a 1996 1.3 toyota corolla and i changes my roccer cover off a glanza turbo and my car leaked oil we changed the gasket but still seemed 2 b leakin a small bit we also put on gasket sealer now the car is not leakin oil but the oil light is commin on only when the car is under 1000 rpm does any1 no wat is worng with it?

Posted on Nov 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota corolla 2001 making noise as it reaches running temp.


engine is misfiring because of CMP sensor . Following can be possible causes :

- Faulty Intake Camshaft Position sensor
- Faulty Camshaft Position Solenoid Valve
- Engine mechanical condition - Valve timing off
- Intake Camshaft Position sensor harness is open or shorted
- Intake Camshaft Position sensor circuit poor electrical connection

Jan 12, 2015 | 2001 Toyota Corolla

1 Answer

89 corolla all trac wagon, if the t-belt goes, does that bend the valves?


In my book--- toyota corolla 1984-1993 , if the belt fails then the valves will be bent

Dec 28, 2014 | 1989 Toyota Corolla

1 Answer

Corolla 2003 has no flashing security light


And this all started after you flooded the car dash?

Mar 18, 2014 | Toyota Cars & Trucks

1 Answer

Abs in my 1996 toyota corolla ae110 has no flow out of one channel what can i do


if you can get the valve pack replace it if not run new brake lines and remove the valve pack and add in a adjustable puportioning valve

Oct 11, 2012 | 1996 Toyota Corolla

1 Answer

Which car has 1nz engine


Thie engine was used in the following form in the following vehicles:-

1.5 L (1497 cm³) Applications:

[edit]2NZ-FE 1.3 L

Applications:

[edit]

Feb 22, 2011 | 1996 Toyota Corolla

2 Answers

'03 Toyota Corolla 1,4 VVT-i 4ZZ engine idle rpm


Idle is factory set and cannot be adjusted, your best bet is checking for cracked hose pipework for air intake at idle,(not at problem under exceleration and driving) Any slight upset to the air /fuel ratio will be most prevelent at idle speeds.Check hoses where the meet metal flanges on manifold intakes and any sharp bends in ppipes.Good luck

Apr 05, 2010 | 2003 Toyota Corolla

1 Answer

Pressure Control Solenoid "D" location on a 2005 Toyota Corolla?


this solenoid is part of the solenoid pack that is located on the valve body inside the transmission.

Mar 28, 2010 | 2006 Toyota Corolla

3 Answers

Engine sound very noisy,knocking at the rocker cover


run low on oil by the sound of it ,,secondhand lump from scrapyard best soloution.if tisw an auto it could be the flex plate behind the torque converter

Aug 14, 2009 | 1996 Toyota Corolla

3 Answers

Toyota corolla 1996


If you remove thermostat water will circulate too fast and will not cool down, replace thermostat and check if your fan is turning in correct direction. Also make sure your ignition timing is ok. I found on some vehicles the waterpump seems ok but when vehicle starts heating up the impeller gets loose on the shaft. Check your brakes if they are not binding.

Jul 29, 2008 | 1998 Toyota Corolla

Not finding what you are looking for?
2010 Toyota Corolla Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...