Question about 2006 GMC Canyon
Posted by Anonymous on
Hi, to change the bulbs in the taillight assembly you have to access it from inside the vehicle. If there is no access panal then uou have to remove the panal to gain access to the bulb recepticle. Usually its apx 1/4 turn or so to remove it. Now you can remove the bulb and install the new one.
Posted on Apr 19, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Aug 09, 2017 | Dodge Cars & Trucks
Aug 27, 2012 | 1998 Buick LeSabre
Feb 06, 2012 | 1998 Mitsubishi Lancer
Mar 04, 2011 | 2000 Lincoln Town Car
process for replacing tail light bulbs is the same in all models. If
you have a burnt-out tail light bulb, you may need to replace the
brake light, the reverse light or the turn signal. The procedure to
replace each of the bulbs is the same.
1. Open the Hummer's rear swing gate. This will expose the edge of the vehicle's tail light assembly. You'll see two small Phillips head screws that hold the tail light assembly in place. Put on your gloves.
Remove the two screws from the tail light assembly. Pull the tail
light out and inspect the back for two bulbs. The top bulb is the
brake light and turn signal. The bottom bulb is the reverse bulb.
Determine which bulb you need to replace.
the tail light into its cradle. Hold it with one hand and replace
the Phillips head screws with the other.
Dec 03, 2010 | 2008 Hummer H3
Apr 06, 2010 | 2005 GMC Canyon
Jun 08, 2009 | 2005 Chevrolet Impala
Apr 06, 2009 | 1996 Buick Century
Jan 13, 2009 | 2004 Infiniti G35 Sport Coupe
17 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: