Question about 1996 Chevrolet Caprice

Open Question

1st to 2nd gear shift solenoid location, 4L60 transmission

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mrgreenz
  • 962 Answers

SOURCE: slight miss in engine, hard shift from 1st to 2nd long 2nd gear

Check both O2 sensor(s) and catalytic coverter.. P0420 means catalyst below threshold. Also check the sensor at the transmission and solenoid.

Posted on Feb 06, 2009

  • 120 Answers

SOURCE: Chevy transmission won't shift into 3rd

front clutches bad needs to be rebuilt

Posted on Feb 13, 2009

  • 1 Answer

SOURCE: 1998 chevy k1500 4x4 4

first of all your truck is already in first gear when your going down the road....lol

Posted on Mar 06, 2009

csmock132
  • 4669 Answers

SOURCE: Transmission won't shift!

Does it just not shift up to 3rd or when it shifts to 3rd it is just like neutral?

Posted on Mar 06, 2009

  • 1 Answer

SOURCE: It's an automatic but it won't shift from 2nd to 3rd.

You're a *******

Posted on Apr 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dodge Ram 3500 skips from 1st to 3rd gear, had rebuild after still the same issue. Any advice?


Governor pressure controls the 1st and 2nd shifts. After that is the 3 and 4 solenoids. you would need to look at the pressure when driving(takes a scanner). pressure is 20 to 30 PSI from 1st to 2nd, depends on acceleration. After that the pressure will jump to 100+ psi. Did you replace the governor solenoid and sensor? They are on the passenger side of the transmission and sit in a block that detaches from the valve body.

Sep 22, 2016 | 2005 Dodge Ram 3500

1 Answer

I have a 2006 Chevy Silverado 1500 z71 it has a 4l60-e trans want shift out of 1st gear until around 5500rpms and you hold it and will not shift out of 2nd gear when in 2nd gear and when I try to drop down...


If you have used the vehicle like that for as little as
a few days, you stand little chance of saving the trans
from a complete rebuild

You need a trans shop or a place you like & trust to
road test & diagnose

I think your beyond a solenoid or module fix, since
you have been using it & it slips as well ,instead of
proper shifting

Mar 10, 2013 | Cars & Trucks

1 Answer

Transmission won't shift into high gear.


are there any codes? Does it shift ok in 1st and 2nd? sounds like your over drive shift solenoid or your 3 and 4 shift solenoid is stuck and needs to be replaced

Jan 02, 2013 | 1997 Chevrolet Blazer

1 Answer

2003 Grand Am Automatic will shift normal from 1-2 but will not shift into 3 or 4.


Worn clutches or solenoid issues if it is an Alison style box.

Apr 02, 2017 | Pontiac Cars & Trucks

1 Answer

AUTOMATIC TRANS


on automatic transmissions Ok,1st check the transmission fluid level if low or if any at all, 2nd you might check your trans shift solenoids, or the wiring to the solenoids verify which solenoid you might need to replace by google it can show you a location of the 2nd and 3rd. If this doesn't cover the issue the next step is a tech to work on the transmission cause it could be and internal issue.

May 25, 2012 | 2003 Nissan Altima

1 Answer

My truck will not shift past 2nd gear. It shift 1st and 2nd and R. No matter what gear you manually shift into it will not go past 2nd gear.


Your transmission should have shift solenoids in it. You could have one that has failed or you could have other internal problems. To acess the shift solenoids you must remove the trans oil pan. If the oil is dark or smells kind of burnt I would suspect bigger problems than a shift soleniod. Also inspect the pan for chunks and a lot of debris. A little bit is normal but more than that is not good.

May 12, 2011 | 1993 Chevrolet K1500

1 Answer

Chevy 4L60 Transmission Shifting Problem


There are 6 solenoids in the trans. Very rarely are these ever bad as it is nearly always mechanical failure. Solenoids are under pan though.

Jun 14, 2010 | 1996 Chevrolet K1500

2 Answers

Transmission promblem


Assuming you have an automatic transmission, I would check the transmission fluid level. If low, you need to identify where the fluid is leaking. Probable locations are transmission pan, or the cooler lines to the radiator.
If this has only begun to happen your transmission will probably be ok. If it has been happening for a while then you will probably be looking for a new transmission.
There is also one other possibility. If the check engine light is on and the codes read something in the area of "transmission control solenoid" or "shift solenoid" then you will need to have those replaced.

Mar 11, 2010 | 1996 Chevrolet K1500

1 Answer

1998 GMC Safari only going into 1st gear


The transmission is probably staying in 2nd gear (limp mode) indicating an electronic issue. Your van will have a 4L60-E transmission

Dec 05, 2008 | 1998 GMC Safari

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...