Question about 2011 Chrysler 200

Open Question

How do I replace passenger side headlight? Or how much should it cost for me to have it replaced at shop or dealer?

How do I replace passenger side headlight?

Posted by Anonymous on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 71 Answers

SOURCE: Replacing the passenger side headlight

There are 2 plastic retainers behind the headlight. Lift these up and out and pull out light. Bulbs are twist type twist and pull. Replace putting the plastic moded headlight nubs back in headlight mount panel and putting clips over them and pushing down.

Posted on Nov 10, 2009

  • 22219 Answers

SOURCE: The passenger side low beam headlight is not working, replaced with new light bulb but it still doesn't work

check the fuses as it has a fuse for each headlight if iam not mistaken

Posted on May 20, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2003 nissan xterra v6 and the exhaust manifold needs to be replaced I was wondering how much that will cost?

Hi Aaron,here's a guide on how to replace.Here's the manifold and cost.You have 2 exhaust manifolds,left and right,the link is for right side,I found a site and the price for the dealer to do is 923.00 and shop cost is 881.00,The passenger side is the right side.

Mar 30, 2013 | Nissan Cars & Trucks

1 Answer

The bearing on the front passenger side needs to be replaced. How much should it cost? Should I change the bearings on all 4 tires, the car has 175000, mil.

well cost will vary, depending on shop rates, not knowing your vehicle year les asume you need:
bearing,seal kit and hub assembly, this must be done in a press, to do so you need to remove knucle assemble from your car, this will change your camber and your toe, in other words it needs to be re-aligment, so estimated cost around $400.00 in a dealer ship, on an independent shop they may reuse your old hub by removing a bearing race that comes off with it, saving some bucks but still your aligment cost may be grater than a pack deal at your dealer, and all they do is toyotas ask around for best prices and dont replace something that is needed.
good luck

Mar 03, 2011 | Toyota Camry Cars & Trucks

1 Answer

My headlight got busted. How much does it cost to replace

Price depends on where you buy it, if your missing the whole assembly, It'll be around $100-$150 a piece.
Check your local automotive parts shop, part number should be 33151SDAA01 for your drivers side and 33101SDAA01 for your passengers side. :)

Feb 17, 2011 | 2007 Honda Accord Sedan

1 Answer

Passenger side headlight was dim, replaced both headlights, passenger side is still dim?

A dim light is often due to a poor ground. Check the ground wire leading from the light to where it attaches to the frame. Disconnect it there, clean it up and reattach it. If you are not mechanically inclined look in the yellow pages under autoelectric shops. Jo

Jun 22, 2010 | 2003 Toyota RAV4

2 Answers

Passenger side low beam and same side front and

There is a box behind the head light,it is a converter,it has most likely gone out,and it is a dealer item.

Apr 23, 2010 | 2001 Lexus RX 300

1 Answer

New Beetle Headlight Problem Passenger Side

Good question to apply to your dealer. Look at Carsurvey. org also. I believe it was a poor design allowing either too much moisture and/or vibration.

Oct 09, 2009 | 2006 Volkswagen New Beetle

2 Answers

Headlight Issue

No, you just might have to take out the battery. I was able to do it without taking the battery out, but only because I was being stubborn. There is one thing I definitely have to say is that you should change both headlights at the same time. My driver side headlight was the first one to go and I didn't listen and just changed that one, days later my passenger side one went out!

Mar 13, 2009 | 2004 Volkswagen Jetta

1 Answer

Passenger side headlight replacement.

Its very easy look at the back side you may have to take off shields for this but its ok they are just retainers pop them out look behind the headlight and there is a cap loosen the cap and you should be able to get to the light from the back side if its the inside light go to that cap and vise versa and replace bulb / Thanks for using fix ya Please rate my response thank you very much

Jan 30, 2009 | 2004 Acura TL

2 Answers

Headlights on 2001 Grand Caravan

we have same problem with our 2001 DCSport. Need some type of control module for headlight. 300 used 600 used.

Jul 09, 2008 | 2001 Dodge Grand Caravan

Not finding what you are looking for?
2011 Chrysler 200 Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides