Question about Nissan Altima

Open Question

How do you remove the cover above the Rear spark plugs on a 2010 Nissan Altima 3.5 v6

Need to figure out what to remove in order change the Spark Plugs. Thanks

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2920 Answers

SOURCE: changing spark plugs and have the wrong firing order

all you have to do is take one loose at time to change them.as you change them put the plug wire back on.

Posted on Jan 31, 2009

  • 259 Answers

SOURCE: need to change the spark plugs and cannot figure out how to remov

you just pull them off the plugs hope this helps regards Jim

Posted on Mar 29, 2009

  • 1 Answer

SOURCE: want to change spark plugs on a nissan 2000 maxima

The rear plugs on this car are relatively easy to change. First locate the electrical connectors on the rear coils and remove them. Next, take a 10mm socket and remove the bolt that hold the coils to the engine block and remove each coil. The last step is to remove each plug and install the new ones. You may need various extensions and such, but it is very do-able and you do not need to remove the air plenum as you do with the 3.5 engine used in 2002.

Posted on Apr 15, 2009

matney68
  • 426 Answers

SOURCE: Cannot change 3 rear spark plugs on 1999 Buick park avenue

there is a special tool for this job but I have cheated on this but you ned to be careful when doing this.The wishbone shaped mount on the front going from motor to front of vehicle, remove and it allows the motor to tilt.

Posted on Jun 19, 2009

bschilz
  • 2049 Answers

SOURCE: how do i put new spark plugs in a nissan 1998

I can't tell if you need to know how to replace the spark plugs or just need the wiring diagram, so i'm giving you a link to a "how to" video.
http://www.wonderhowto.com/how-to/video/how-to-replace-spark-plugs-203687/

Since you didn't memorize the wiring order, here is a diagram...



2899006.gif

Posted on Sep 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are the spark plugs in 2009 nissan altima 2.5


under the coils, carefully remove the coil and the spark plug will be inside, it is pretty easy to do.

Oct 14, 2012 | 2009 Nissan Altima 2.5

2 Answers

Does the valve cover on a 2002 Altima 2.5L have to be replace if the spark plug seals are bad


No you do not have to replace the valve cover, you however to need to replace the spark plug ring seals. You can find it on ebay, or go to your local auto store, like autozone, advance auto, and they should be able to order it for you too. You may need to take out your valve cover in order to get to the spark plug rubber seals which is on the inner side of your valve cover.

Feb 06, 2011 | 2002 Nissan Altima

1 Answer

Did not change my spark plug wires one at a time need a diagram plz :( ......for a nissan altima ,93


For the 1993 Nissan Altima 2.4L DOHC in-Line 4-Cylinder:

Firing Order:
1 - 3 - 4 - 2
Cylinders:
_____back______
|...1....2....3....4...|
_____front_______

Distributor:
3.........1
......o.....
4.........2

Aug 12, 2010 | Nissan Altima Cars & Trucks

1 Answer

How to change spark plugs on the v6 Nissan 2000 Maxima?


For the 3 spark plugs in front:
1. You would have to remove the plastic protective cover (this cover is silver&red w/ the words "nissan and v6 3000")
2. unplug connector and remove coil (DO NOT mix up the coils, keep the same coils on the same cylinder)
3. Remove spark plug

Rear 3 plugs: located on the rear of the intake (the black pipes atop the engine). there are 3 openings at the rear of the black intake pipes, each opening has a coil mounted.
1. Unplug coil connector and remove coil
2. remove spark plug (you'll need a long extension)
***Installation is reverse, be sure not to over tighten the plugs!! Use anti-seize compound on all the new plugs threading. Hopefully this helps!!

Apr 01, 2010 | 2000 Nissan Maxima

1 Answer

How do you change the spark plugs on a 2005 hyundai tiburon


If v6 may need to remove intake manifold and applicable parts to gain acess to spark plug coils, remove coils and remove plugs install reverse order
If 4 cyl remaove cover on valve cover remove spark plug coils etc.

Oct 20, 2009 | 2004 Hyundai Tiburon

1 Answer

How do i put new spark plugs in a nissan 1998 altima. digram would help. I removed the wire set before memorizing the order they were in.


I can't tell if you need to know how to replace the spark plugs or just need the wiring diagram, so i'm giving you a link to a "how to" video.
http://www.wonderhowto.com/how-to/video/how-to-replace-spark-plugs-203687/

Since you didn't memorize the wiring order, here is a diagram...



2899006.gif

Sep 13, 2009 | 1998 Nissan Altima

1 Answer

Change sparks plugs on 06 hyundai sonata v6


You didn't specify whether you have the (4) cylinder or the (6) cylinder engine..... I have a 2004 Hyundai Sonata 2.4L 4 cylinder and I just changed the spark plugs in it. I believe that the 2005 2.4L engine is the same. To locate and change the (4) spark plugs on a 2004 Hyundai 2.4L 4 cylinder engine: Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way. Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed. Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right. Starting with the fist spark plug on the left: Remove the spark plug cable by pulling straight up on the insulated connector. Using a spark plug socket, remove the old spark plug and install a new one in it's place. To access the second spark plug from the left, remove the electrical connector and the spark plug cable wire from coil number (1) and then remove the (2) 12mm bolts that secure the coil to the engine. Spark plug number (2) is located directly under the coil. Lift the coil straight up removing the insulated connector from spark plug number (2). Using a spark plug socket, remove old spark and install a new one in it's place. Repeat same procedures for spark plugs number (3) and (4). Note: If you have the (6) cylinder engine, the front (3) sparks pluge are readilly accessible but in order to access the (3) rear spark plugs, you will have to remove the intake manifold

Jul 08, 2009 | 2006 Hyundai Sonata

2 Answers

Spark plug change


Well i wouldent of thought you need to take off the valve cover AKA (rocker cover) to change spark plugs. spark plugs are usally set at a touque setting at 10 to 15 NMs (newton meters). if you do have to take off the valve cover the gasket can be re-used no O-rings needed.

Mar 06, 2009 | 1994 Nissan Altima

2 Answers

Order of spark plug wires


Nissan Altima question: What is the firing order for a 1995 Nissan Altima? more than sure it's 1-3-4-2

i found this for the 4-cyl.

Dec 22, 2008 | 1995 Nissan Altima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...