Question about 1988 Toyota Pickup

Open Question

1985 toyota pickup - why is heater not blowing hot air?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76109 Answers

SOURCE: heater

the 1st thing is to see if the heater core has flow, check this by touching the in and out hose of the core at the engine firewall, if both are hot then the heater core is ok, at that point u will have to check the blend door to see if it moves, this door diverts the air over the hot heater core or the cold AC evaporator core, it is often controlled by a small special electric motor, it is called the blend door actuator motor, if it fails it will useually fail in the cold air position, to change this motor u must remove the dash.

Posted on Dec 15, 2008

Ad
  • 4 Answers

SOURCE: heater only blows out cold air

Check the valve that controls coolant flow to the cabin

Posted on Feb 12, 2009

johnjohn2
  • 5763 Answers

SOURCE: Toyota Celica gts 2000 blowing cold air when heater is on.

nothing try back flushing heater core, they clog up due to litle water preasure,you might want to flush cooling system if you already havent, hope this hleps.

Posted on Oct 06, 2009

  • 396 Answers

SOURCE: i have 91 toyota pickup truck and the heater blows

The first thing I would check is the heater control valve. This valve opens when you turn the inside control to heat and allows hot coolant to enter the heater core. If coolant doesn't enter the core, you don't have heat.

This valve is usually located under the hood behind the engine up close to the firewall. It will have coolant hoses attached to it. There should be an arm on the valve with a cable from inside the vehicle attached to it. This cable causes the arm to move, opening and closing the valve. Have someone inside move the heater control and watch this valve for movement.

During the warmer months, this valve is not being opened and closed, and it can get stuck. Moving the arm a few times will probably get it working again.

Posted on Oct 20, 2009

  • 750 Answers

SOURCE: The heater is blowing but the air is not hot. It

directional flaps i ducting may be stock in close positioncheck with an a/c tech to con ferm and repair

Posted on Oct 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why hot air dont blow out of vent?


Probably have a bad Door Airflow control box

Dec 04, 2016 | Toyota Cars & Trucks

1 Answer

Heater won t blow air


Sounds like either the heater core is plugged or the hot water valve isn't working

Oct 21, 2013 | Toyota Camry Cars & Trucks

1 Answer

No heat on my toyota pickup 1991


CHECK THE BLEND DOORS ON INSIDE OF TRUCK UNDER THE DASH IFE THE BLEND DOOR IS STUCK IT WONT BLOW HOT AIR

Jan 18, 2013 | 1991 Toyota Pickup

1 Answer

I was driving my 1991 toyota pickup when it started to overheat i let it sit and cool down then drove it home stopping evertime it got to hot i looked under the hood and found the alternator belt broke I...


Check and top up the coolant level. When an engine heats up fast and there is no heat from the heater it is low enough on coolant that it doesn't circulate through the heater core. Hope this helps.

Sep 21, 2011 | 1991 Toyota Pickup

1 Answer

After a rebuild to this 1985 toyota 4x4, and after fixing all the air leaks,etc., the truck has absolutly no power....please help


the 1985 toyota pickup that has no power after the engine was rebuilt sounds like the timing is ******** was the distributor installed correctly

Jul 11, 2011 | 1985 Toyota Pickup

1 Answer

The low/med/high fan switch on my 1985 Toyota pickup is no longer working, How do I replace the heater fan blower switch?


Hi,
Don't go there just yet ! Most heater motor speed problems relate to the heater resistor ! It's located in the ducting close to the motor assy and usually has 4/5 wires on to it and a 2 screw fixing. This componant must be cooled (hence air duct location) and is solely responsible for motor speeds ! You can check motor fan by test lamp/meter ! Good Luck

Dec 13, 2010 | 1985 Toyota Pickup

1 Answer

I have a 94 toyota v6 pickup, just replaced the radiator. topped off coolant, ran for approx 10 mins. temp gauge move to nomal operating temp. then turned on a/c to put a load on it, the temp then went up....


Did you recheck the water level at the radiator filler cap after the engine was at normal temperature (ie after about 15 mins idling with heater control on full and fan on Low) because it sounds like there is an air lock in the system. Air lock should clear after thermostat starts to open. This is indicated by the top radiator hose becoming hot to touch.

Aug 18, 2010 | 1994 Toyota Pickup

1 Answer

How do I replace the heater core on a 1985 toyota pickup without A.C.


the core is behind the middle of the firewall. follow your heater hoses inthe engine compartment. Under the dash remove the neccess. to replace

Jun 15, 2010 | 1985 Toyota Pickup

1 Answer

'98 S-10 heater blowing cold air - not hot air


will the air flow switch from floor to the mid to defrost? if so then we have a problem with the tempature door actuator. easy to replace just in tight place. Keep me posted for more help or if this was any help thanks

Jan 31, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

Heaters randomly blow cold, idle jump


Make sure your anti-freeze is full in the radiator.. If it is low, the heater is the first to go, but you wont see signs of overheating.. This I believe is also contributing to your idle fluctuation.

Dec 27, 2008 | 1992 Toyota Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...