Question about Toyota RunX
It wont lock or unlock the car.The red light still shows on the key.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
HI, I'm reading your problem,
Let me explain something about your car.
2005 Ford Taurus, The key on that car has Chip inside of the key and receiver on the ignition switch,
Check if the key you are trying to use is Black and has a plastic head.
If not you need a key with that characteristics.
But if you have the right key, Remenber if you had drop on the floor, or hit with something,
Because some times they come damaged, with insignificat thins.
Remenber if you left the key close to a magnets like speakers.
If nothing aply at your case, you need to call a place Aloha Smith, they have the computer to program or reprogarm your key. IF not you can't start your car.
OK.. I hope this information work for you.
Thank's for submit yous question on fixya.com
Posted on Jul 10, 2008
SOURCE: Car Alarm
sounds like the drivers side key switch has failed remove the interior door panel and there will be a switch attached to the back of the key lock cylinder or around there it should be two or three wires also check the door jamb wire harness where the door closes for any broken or damaged wires, use a vot meter and see if you get power or ground to the opposite side of the switch when you use the key to lock and unlock the door if nothing changes and there is power or ground! at this switch i would replace it, i don't think there is one but if the car has a passenger side key hole try to unlock the car from that side and see if you get the same problem -jeff
Posted on Aug 31, 2008
happened to me once. the fuse for it was blown. $3 fuse replacement. check the fuse box & manual for this component. the fuse removal tool is located inside the engine fusebox area, and the fuse for the lock is inside the driver side box.
Posted on May 14, 2009
try putting key in ignition turn to on position
then press lock & unlock several times slowly if door locks cycle up & down after 1st press it lost code and is now resynconised.
now try remote with all doors closed and key out of ignition
if this dont work need to register key(program)back into system which dealer must do with Tech2 if round heart shapped remote
Posted on Jun 21, 2009
IF YOU TYPE 1999 RENAULT LAGUNA REPROGRAMME KEY INTO A GOOGLE SEARCH, YOU WILL BE ABLE TO PRINTOFF INSTRUCTIONS TO REPROGRAMME THE KEY TO THE KEY READER.THE IGNITION NEEDS TO BE OFF TO DO THIS
Posted on Dec 02, 2009
Tips for a great answer:
Jul 01, 2015 | 1998 Nissan Altima
Jun 30, 2014 | 2005 GMC Envoy
Mar 27, 2012 | Cars & Trucks
Sep 03, 2011 | Isuzu Rodeo Cars & Trucks
Nov 26, 2010 | 2003 Renault 181
Jan 01, 2010 | Dodge Charger Cars & Trucks
Jul 09, 2009 | 2004 Renault 181
May 12, 2009 | BMW X5 Series Cars & Trucks
Apr 15, 2009 | 1995 Mercedes-Benz C-Class
Jan 14, 2009 | 2007 Dodge Ram 1500 Quad Cab Sport
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: