Question about 2010 Ford Ranger 2.3

Open Question

Iac location on a 2010 ford ranger - 2010 Ford Ranger 2.3

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14 Answers

SOURCE: IAC control valve. Locato\ion 2002 ford escape

If it's not idling and has problems starting, it's probably the IAC motor. It's located on the throttle body. Follow the airfilter box all the way to the engine, where the rubber flex hose attaches. The throttle body should be the first aluminum part you come to. Attached to the side you'll find small little aluminum part with a small wire harness attached. Unplug it, take the IAC motor off and clean inside with carb cleaner. This should fix the problem with the idle.

Posted on Sep 11, 2009

urnuts73
  • 210 Answers

SOURCE: Trying to locate the ODB

look under the dash to the left of the steering wheel
you ll se a small panel maybe 3"x3" open it up its right there
all odb2 connection can be found in this spot
made standard for all vehicles

Posted on Jan 23, 2011

Testimonial: "thanks once spotted easy. I was looking in right with the rest of the wiring looms"

  • 1 Answer

SOURCE: 1999 Ranger IAC and PCM problems

i would start looking for vacuum leaks first,

Posted on Jun 26, 2012

  • 318 Answers

SOURCE: where do locate the rpm meter on the ford ranger 2010 engine

I believe the rev unit is on the injector pump and part of the wiring that you may have not connected or you have a different model pump

Posted on Dec 10, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the in line fuseable link located on a 94 ford ranger 2.3 motor


    Alternator fuse link repaired my way. - YouTube

    ? 2:10
    https://www.youtube.com/watch?v=xgJQXKESDcI
    Dec 24, 2013 - Uploaded by Potskie
    I had the exact same situation with my ranger. ... I found thefuse links for the charge or alt output but not the one I ..... In line fuse, battery, or alternator? ... Of Key-Off Battery Drain (Parasitic Draw) - Duration: 18:14. by Motor Age.Missing: 2.3

    Fusible links and inline fuses? - Ford Truck Enthusiasts Forums

    www.ford-trucks.com/forums/885708-fusible-links-and-inline-fuses.html
    Sep 17, 2009 - Location: Kuna ID ... The PO had replaced one of the fusible links with an inline 30amp fuse. .... 81-F-150-Explorer is a splendid one to behold .... to charge the battery goes through that link when needed, and/or the battery to the other components when the engine is off. ... 91 ford ranger 2.3 daily driver 1994 Ford Ranger XLT 2.3L man. trans. - Ford Truck ...
    Jul 6, 2014
    86' Ranger cutting out!!! Fuel ? - Ford Truck Enthusiasts Forums
    May 10, 2012
    90' 302 fusible link for fuel? - Ford Truck Enthusiasts Forums
    Nov 2, 2010
    1988 ranger headlights won't work??? help - Ford Truck ...
    May 17, 2009
    More results from www.ford-trucks.com
    Missing: 94 images for Where is the in line fusible link located on a ...

Dec 30, 2015 | Ford Cars & Trucks

1 Answer

Where is the location of thermostat for 2.3 L 2010 Ford Ranger


Follow the top radiator hose to engine,it's in the thermostat cover.

Sep 22, 2015 | 2010 Ford Ranger 2.3

1 Answer

2010 ford ranger


Ground wire or connection probably requires renewal.

Feb 27, 2014 | Cars & Trucks

1 Answer

Where do locate the rpm meter on the ford ranger 2010 engine


I believe the rev unit is on the injector pump and part of the wiring that you may have not connected or you have a different model pump

Dec 10, 2012 | 2010 Ford Ranger 2.3

1 Answer

1999 Ranger IAC and PCM problems


i would start looking for vacuum leaks first,

Jun 20, 2012 | 1999 Ford Ranger SuperCab

1 Answer

My 2010 ranger idles fine when cold, but cuts out when idling warm


Have a local shop or auto parts store read the fault codes, it sounds as if you may have an o2 sensor that is out of range.

Dec 26, 2011 | 2010 Ford Ranger

2 Answers

I have p1 auto codes p1506,p1443,p1744


the 1443 code is very common i just fixed it on my ranger. The canistger purge valve is defective, I found one at napa for about $46. It is located by the battery. After about 1/2 a day of driving or 4-5 starts that code will go away.

May 18, 2010 | 1997 Ford Ranger SuperCab

Not finding what you are looking for?
2010 Ford Ranger 2.3 Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...