Question about 1988 Lincoln Mark VII
LEARNING ABOUT YOUR BRAKE SYSTEM
The hydraulic brake booster on a late model Mark VII and early Continentals, is very different from most. It is equipped with something known as a "TEVES" brake system. I'll attempt to teach you what does what and why, so you won't spend a ton of money just because you and maybe your mechanic aren't familiar how it works. The way its always been is,..."if you don't understand it...replace the whole thing"! The problem with using this technique is, unless you want to spend $2K for the whole thing, your going to be buying a used system....which may not be a whole lot better than the one you have now.
The main parts in the system that we will discuss include an ACCUMULATOR, a HYDRAULIC PUMP, a hydraulic pump RELAY, and a PRESSURE SWITCH. These are the key players in this operation.
THE LOCATION OF THESE PARTS ARE AS FOLLOWS:
HYDRAULIC PUMP MOTOR= Underneath the brake assembly (2 pin connector) Hydraulic pump motor
RELAY = On the drivers side strut tower
PRESSURE SWITCH = 5 pin connector facing the # 7 or 8 spark plug(drivers side)
ACCUMULATOR = Round black ball on the drivers side
WHAT THESE ITEMS DO:
HYDRAULIC PUMP MOTOR is an electric hydraulic pump used to "boost" pressure for the brake assembly. This pump is $900 new!
hydraulic pump motor RELAY is just what its sounds like. It gives the hydraulic pump motor power to come on.
PRESSURE SWITCH is the "brains" in the system. It senses how much pressure is "on line", and when the system needs more pressure, it tells the relay to "power up" the hydraulic pump motor.
Another one of its jobs is to turn on the RED BRAKE LIGHT, then the ANTI-LOCK lights to alert the driver that the pressure is dangerously low. (The reason the anti-lock light comes on, is because the ABS cannot fuction if theres a problem with the manual brakes)
ACCUMULATOR stores energy or pressure like a reservoir. Its there so the hydraulic pump motor only has to come on every 3rd or 5th time. Its design is more complicated, but basicaly the same principle as an air tank on a compressor.
WHAT NORMALLY HAPPENS:
Whats usually happens is, in time, the accumulator gets weak with age and can't hold the pressure like it was designed too, and therefore, the hydraulic motor comes on everytime the brakes are applied....rather than every 3rd or 5th time. This means all these parts are working 3 or 5 times more than they were designed to. This puts an extreme amount of pressure on an already old system.
What we know from this is, the accumulator needs replacement because its what started all this, but now the pressure switch and relay needs replacement also because it has worked it to death.
NOTE: always replace the relay when replacing the pressure switch. The relay came on everytime the pressure switch told it too, so if ones worn out....the others not far behind!
Posted on May 07, 2015
The ABS unit has failed and needs to be replaced.
Posted on Jun 11, 2014
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you have never done this before, you really need to go get a Haynes or Chilton manual for this. They run about $25.00 and have step by step plus pictures. I've done one in my carreer and will never do another. And it was for my son. Believe me, it's a task I don't wish on anyone.
Go check out a manual. Google "Haynes Repair Manuals". It's worth it.
Posted on Mar 15, 2009
Technically it will fit, if you dont like having a hood. But again. Stick with the trusty 302, Toss a Novi 1000 on it, and enjoy.
Posted on Aug 18, 2009
SOURCE: abs brake light on
actually you may not need to replace any parts. from what you are explaining on the vehicle you have a air lock in your brake lines. try and bleed the brakes again starting from the rear passenger than the drivers passenger than the passengers front and last the drivers front. than disconnect the negative battery cable for about 5 min to reset the lights and see what happens. please let me know if you need more assistance with this problem.
please do not forget to rate and comment about your expereince with fixya today.
Posted on Dec 27, 2009
just disconnect the ABS control module, the system will then default to standard brakes, you will however have a ABS warning light on all the time.
Posted on Feb 06, 2010
sounds like your brake booster is messed up or jammed replace it cause they mess up and your in a accident not worth 100 bucks to get in accident
Posted on Sep 11, 2010
Tips for a great answer:
May 11, 2016 | 1987 Lincoln Mark VII
Sep 08, 2015 | 1992 Lincoln Mark VII
Aug 30, 2014 | 1988 Lincoln Mark VII
May 13, 2014 | 1988 Lincoln Mark VII
Dec 18, 2011 | 1992 Lincoln Mark VII
Oct 10, 2010 | 1991 Lincoln Mark VII
Feb 06, 2010 | 1990 Lincoln Mark VII
Jun 25, 2009 | 1988 Lincoln Mark VII
Apr 26, 2009 | 1988 Lincoln Mark VII
132 people viewed this question
Usually answered in minutes!