Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on May 13, 2014

Where is the crank angle sensor located 2001 holden astra

3 Related Answers

Roger Foster

  • 701 Answers
  • Posted on May 06, 2009

SOURCE: need location of crank angle sensor on 1997 pontiac sunfire 2.2 liter

Hello oldiro: My name is Roger and I can help. From under the vehicle look up between the transmission and the side of the block. Mid motor above the pan rail there is a bolted in sensor. This should be the crank sensor.It will have two wires plugged in to it. Please rate this answer as this lets us know you received the information you asked for. Should you need further help please just ask. Thank You for using FixYa. Roger

Ad

Anonymous

  • 6784 Answers
  • Posted on May 23, 2009

SOURCE: crank angle sensor location

The crank sensor is always located next to the crankshaft pulley. it will be inserted into the block with the top part of the housing half way out. you cant miss the wires leading into the tip of the housing next to the crank shaft pulley.

Anonymous

  • 2 Answers
  • Posted on Nov 10, 2012

SOURCE: holden astra 96 1.8 takes too many cranks to start when cold

you must take out the fuel pump and fix the orings located on the returning fuel system into the nest of pump.it makes the fuel system loosing pressure so the engine wont start fast after night.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

I need to know where my fuel filter is located Holden Astra 2001

Hi Tracy I believe your astra is a TS version filter will be attached to fuel pump in fuel tank. Hope this info helps
0helpful
1answer

I have 2003 astra Sri Turbo ts hatch the engine light is staying on but the car runs fine? Suggestions on what it could be?

Tags location of knock sensor

https://outofthebooks.top/term/location-of-knock-sensor
Need to locate knock sensor on 1999 camry V6. Where is ... Cabin filter · I have 2003 astra Sri Turbo ts hatch the engine light is staying on but the car runs fine?

Common problems with the Astra G [Archive] - Astra Owners Network ...

www.astraownersnetwork.co.uk > ... > Astra Chat > Astra G

Mar 20, 2007 - 100+ posts - ‎100+ authors
Also, rear disc brakes on the SRi models have a tendancy to seize up ... Pre 2003 2.2i.... about 10mins but the engine temperature stays fine when running. it .... theengine manigement light is constantly on, but car running like a dream! ..... I have a 2007 astra sport hatch sxi 1.6 and seem to have a strange ...

Holden Astra known issues? - Holden - Automotive - Whirlpool

forums.whirlpool.net.au > Automotive > Holden

WhirlpoolDec 12, 2012 - The TS Holden Astras, late 90s to early 2000s, stay away. Unreliable ...People give the TS Astra a lot of flak but its a superb car. We have one ...
0helpful
1answer

Looking for the location of the crank angle sensor on a 2004 XC holden barina 1.4 motor ? , thanks

side of motor firewall side down near cv shaft that goes into gearbox if you look there you will see a 8mm bolt with the sensor going into the side of motor
0helpful
1answer

How to install Opel Astra Crank sensor?

locate the crank sensor there should be two screws and a electric plug pretty simple if u can locate the sensor
0helpful
1answer

We are trying to find the crank angle sensor in a holden vectra

crank angle sensor located on engine block lower where fly wheel would turn.
0helpful
3answers

Where is the fuel pump relay located on a 2001 holden astra 1.8

The fuel pump relay is located under the hood near the battery.
Usually in a black plastic box. There will be some fuses and other relays in as well. It should be marked fuel pump on or under the lid.
Good luck. Replace with same relay.
0helpful
2answers

Holden astra 96 1.8 takes too many cranks to start when cold

Turn key on for few seconds then off. repeat 4 times then try to start. if start ok indicates loss of fuel pressure. could be fuel pump
0helpful
1answer

How do i replace a holden vt crank angle sensor

To replace crank angle sensor .
1.you will need to remove drive belt
2.remove harmonic balancer to get to crank angle sensor
3.remove crank angle sensor
then do these steps in reverse to reassembly
Not finding what you are looking for?

1,033 views

Ask a Question

Usually answered in minutes!

Top Holden Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Holden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...