Question about 2003 Nissan Altima

Open Question

Identifix login TonyHernandez

Repacement of Rear shocks

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Identifix login


The most common cause of something like this is a bad battery. When the voltage drops on a battery, the amperage increases,

Aug 05, 2014 | Ford F-150 Cars & Trucks

1 Answer

Replace rear shocks


why?
this is just regular every day old fashion shocks.
a bolt on the bottom and a nut on top.
put car on stands, and remove them , no side effects. they are passive to suspension not struts. add on's

if all that is greek, login to alldata.com and read it there
it has a blow by blow steps. every step.
but will not tell you direction of threads, its RHT. (normal)

Jul 07, 2014 | 2004 Nissan Quest

1 Answer

How do I get diagrams for rear end on a 2000 ford ranger


Try several local repair shops

They should have a data base called
Alldata,Mitchell or Identifix

Hopefully they be willing to print what you need

The data base is an online copy of ford factory
manuals in your case,it covers all vehicles from
1990 on I believe & isn't cheap,they rent it on a
monthly basis

Ever wonder how they know so much & fix things,
now you know,reference material,can't fix what
you know nothing about

Feb 02, 2013 | 2000 Ford Ranger SuperCab

1 Answer

Rear door does not Respond anymore


could be motor or maybe switch problem. if motor is cause then what better place to find one than the internet. Easyest way i have found is simply google it.

Aug 12, 2012 | 2001 Chrysler Town & Country

1 Answer

Need new struts on rear, Would like to replace with air shocks. Any suggestions on how I would do this?


Shock Absorber -The rear already has air shocks on the 1999 Cadillac Deville: REMOVAL & INSTALLATION Rear
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove or disconnect the following:
    • Rear wheel Fig. 1: Exploded view of the rear shock absorber mounting 9300vg06.gif

    • Negative battery cable
    • Shock absorber electrical connector from the rear suspension support, If equipped
  3. Support the lower control arm with a jack to relieve the tension on the shock absorber.
  4. Remove or disconnect the following:
    • Lower shock absorber mounting bolt and nut
    • Upper mounting nut, retainer, and insulator
    • Shock absorber compress by hand and remove through the upper control arm
    To install:
  5. Position the top of the shock absorber with the insulator attached into the suspension support.
  6. Install or connect the following:
    • Upper shock insulator, retainer and nut. Torque the nut to 55 ft. lbs. (74 Nm).
    • Shock absorber lower mounting nut/bolt. Torque the nut to 75 ft. lbs. (102 Nm).
    • Shock absorber electrical connector to the rear suspension support, if equipped
    • Rear wheel
    • Negative battery cable
prev.gif next.gif

Jul 29, 2010 | 1999 Cadillac DeVille

1 Answer

Instructions for replacing shocks & struts


Ok first off if the vehicle is equipped with air ride you need to turn the air ride off or you will blow out the rear bags when the rear is off the ground.

For the front Remove the wheel. Take off the upper shock nut. Now remover the two lower retaining nuts. Compress the shock and pull it out. Install in reverse order. Before installing the new shock push the piston completely down and allow it to return. Do this 2 to 3 times.

For the rear remove the wheel support the rear end with jack stands at the jack points. Now use your jack (not a scissor jack) and place it under the rear diff to support the rear diff. If you have another set of jack stands use them and support the rear axle as it sits.

Remove the lower shock bolt. Now remove the two upper shock bolts and the shock will come right out.



Jul 02, 2010 | 1998 Ford Explorer

1 Answer

Do i have to remove the back seat to take rear struts off


Answer
REMOVAL - SHOCK ASSEMBLY
NOTE: Access for the nuts attaching the rear shock assembly upper mount to the vehicle is through the inside of the trunk.

Roll back carpeting on top of the rear shock tower to access shock mounting nuts.
Remove plastic cover from the top of the shock assembly.
Remove 2 nuts attaching the shock assembly upper mount/spring seat to the shock tower.
Raise vehicle on jackstands or centered on a frame contact type hoist. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE)
Remove the rear wheel and tire assembly from the vehicle.
Remove two fasteners holding the splash shield to the shock assembly upper mount.
Remove bolt attaching shock absorber to rear knuckle (Shock Absorber Attachment To Knuckle).
Remove the shock absorber from the rear knuckle first when removing the shock absorber from vehicle by pushing down on the rear suspension.
Move shock assembly downward and tilt top of shock outward, then remove shock assembly from vehicle through top of wheel opening

Nov 23, 2009 | 2002 Dodge Stratus

1 Answer

How do i replace the back shocks?


if you bounce the car by putting your weight on the rear bumper with your knee you can test the rear shocks. If the car bounces more than once on the way up you need shocks. I generally replace shocks on new cars with factory installed shocks anywhere from 40,000 - 50,000 miles. There are bolts at the top and bottom of the shocks that will have to be removed. You can do this a little easier by removing the rear wheels and placing the car on Jack Stands.

Nov 15, 2009 | 1995 Toyota Tercel

1 Answer

2004 dodge stratus SE


This is a dangerous job if you do not have the proper equipment for compressing the spring that is around the rear shock. I do not recomend performing this job without the proper equipment. Unloading the spring without it compressed can cuase injury.

If you have the proper equipment this is how you do it.

REMOVAL - SHOCK ASSEMBLY NOTE: Access for the nuts attaching the rear shock assembly upper mount to the vehicle is through the inside of the trunk.
  1. Roll back carpeting on top of the rear shock tower to access shock mounting nuts.
  2. Remove plastic cover from the top of the shock assembly.
  3. Remove 2 nuts attaching the shock assembly upper mount/spring seat to the shock tower.
  4. Raise vehicle on jackstands or centered on a frame contact type hoist.
  5. Remove the rear wheel and tire assembly from the vehicle.
  6. Remove two fasteners holding the splash shield to the shock assembly upper mount.
  7. Remove bolt attaching shock absorber to rear knuckle
  8. Remove the shock absorber from the rear knuckle first when removing the shock absorber from vehicle by pushing down on the rear suspension.
  9. Move shock assembly downward and tilt top of shock outward, then remove shock assembly from vehicle through top of wheel opening.

Aug 04, 2008 | 2004 Dodge Neon

Not finding what you are looking for?
2003 Nissan Altima Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...