Question about 2006 GMC Envoy

Open Question

Gear shifter on gmc envoy slides back and forth with no resistance

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 11 Answers

SOURCE: 2002 GMC Envoy Stuck in Reverse

broke cable

Posted on Sep 13, 2008

  • 314 Answers

SOURCE: My 2002 GMC Envoy is stuck in the neutral position

i would try to get down to the linkage adjustment and see if maybe it is not adjusted properly or if it jumped out of alignment. Place the transmission in park and the selector in park after loosening nut and then tighten down the nut.

Posted on Jul 09, 2009

  • 45 Answers

SOURCE: gear will not go in place.

It is quite likely that the linkage cables have come loose. Remove the rubber boot (cover) and visually inspect the 2 cables. If they appear properly connected, check the connection at the gearbox. This might be a simple matter of re-attaching the cables at some point. If not, you should have it inspected be a professional shop, as it is possible that the internal linkage has come apart.

Posted on Sep 07, 2009

lesabre1972
  • 474 Answers

SOURCE: I have a 2004 GMC Envoy XT with 4wd. I started to

sounds like you have a broken shifter cable.Go under the rig and shift the transmision manually.Put on the parking brake and on the drivers side of the trany should be the lever to move.Look for the broken part while you are there it will also help to locate the shift lever on the trany.

Posted on Jul 31, 2010

  • 1311 Answers

SOURCE: gmc envoy 04, the gear shift slides up and down

The shift cable probably has broken, usually the ring at the end breaks. Below is a diagram that shows the cable (it is item #7)

freddyboy61_16.gif

Posted on Sep 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Center console gear shifter


Yes, most likely. The linkage needs inspection from the shift lever to the transmission. You may have to check under the vehicle for disconnected linkage AND under the cover of the shift lever inside the truck.

Sep 18, 2016 | 2004 GMC Envoy

1 Answer

On 2004 gmc envoy slt pulled in garage dash says in drive council shifter says in park truck won't start truck rolls back and forth shifter button can't push in please help


Since you can push it. It would be the shifter cable(clips broke or just came disconnected) or the bracket holding the cable on either end of it. Most likely at the shifter. I have seen them broke at the transmission. But it was a fault of the person trying to remove it from the bracket.

Mar 16, 2016 | GMC Cars & Trucks

1 Answer

Does the 2004 gmc envoy have overdrive


If there is an OD button on the gear shifter or has two drive ranges on the shifter then yes

May 14, 2014 | 2004 GMC Envoy

1 Answer

My mechanic tells me I need a new interlock shift in my 2002 GMC Envoy. On ocassion, I need to pump my brakes a few times before I am able to move my gear from park to drive. The shifter is cheap but the...


Before any parts are replaced, it needs to be determined if the brake pedal switch is being actuated properly and functioning properly. After that, the interlock solenoid needs to be checked, as well as the linkage.

Jan 03, 2013 | 2002 GMC Envoy

2 Answers

My envoy is stuck in reverse the shift will not move and I can not press the button to move the shift. Can someone tell me what it can be please


The trans shift cable is held onto the shifter with a little round plastic clip that you can get from the "help" section at your local auto parts store for under $15. Common problem, the clip wears out and the cable pops off.

70ff5319-1b68-4adb-9934-6a33257e4da5.png

May 28, 2012 | 2002 GMC Envoy

1 Answer

2004 gmc envoy shifter stuck key wont release


First i would check your brake switch it works a locking mechanism right along side your gear shifter which locks the gearshift in place. also look for a slot sometimes there is a slot made for you to slide your key into to release the shifter and allow you to move it manually. it will be on top somewhere by your shifter identification indicator PRND321 if the brake switch is good remove the PRD321 cover and look for the lock on the right hand side at the base of the shifter this may need replacing. thanks for using Fix Ya
Please rate my solution that is how we get our points and achievements Thank You in advance.

Apr 10, 2012 | 2004 GMC Envoy

1 Answer

I have a 2004 GMC Envoy XT with 4wd. I started to


sounds like you have a broken shifter cable.Go under the rig and shift the transmision manually.Put on the parking brake and on the drivers side of the trany should be the lever to move.Look for the broken part while you are there it will also help to locate the shift lever on the trany.

Jul 31, 2010 | 2004 GMC Envoy

1 Answer

The button on our 2004 GMC Envoy gear shift will not depress when


The brake rlease switch for the gearshift might need adjusted-replaced or the shifter itself might need adjusted

Mar 22, 2010 | 2002 GMC Envoy

Not finding what you are looking for?
2006 GMC Envoy Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...