Question about 2001 Ford Super Duty F 450

Open Question

EF starts in P N but auto remains in forward gear regardless of gearstick position

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22156 Answers

SOURCE: ford galaxy 2002 manual. Stuck in a forward gear

their are three shafts and one of them is the fixing that holds the shaft to the gearbox and this one has most likely broke allowing the others to move but ?? not the selector shaft

Posted on Apr 05, 2010

Ad
  • 70 Answers

SOURCE: 2000 ford explorer 5r55E stuck in second gear and all gear positions

It sounds like the linkages have let go. If this is the case, then drive it to a repairer straight away. If you turn the vehicle off you might not get it started again.

Posted on Oct 10, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset the gears into the correct positions on the gearstick that corespond with the caBLES ON THE GEARBOX.. ive had everything off cos had to change clutch


take it to someone that knows what he is doing,aparently you dont and its too complicated for you,its not easy

Apr 06, 2015 | Cars & Trucks

1 Answer

Renault trafic stuck in second gear


There is one of 2 problems that will give this indication. The first is the gear lever end in the shift rail has moved out of the slot and is behind the slot and not moving it . This can be checked by removing the lever mount from the top of the box and physically moving the shift rail back into the neutral position then replacing the gear lever back into the selector gate and moving the rail again.. The second possible fault is that the selector fork has come loose on the rail and is not moving the gear (just sliding on the rail) If that is the case the box will have to come out unless you can see the selector fork and the lock screws from the top of the box when the lever mount is removed.. If you can move the selector rod forward and tightening up the lock screw then pulling it back to neutral. Repeat until the fork is back in neutral position and lock it up. Most lock screws have a hole and there is wire tied around the shaft to prevent the screw coming loose. If the box has been reconditioned at some time then it is possible that the person doing the job neglected the wire bit.

Nov 28, 2013 | 1993 Mazda 323

1 Answer

2000 ford explorer 5r55E stuck in second gear and all gear positions


It sounds like the linkages have let go. If this is the case, then drive it to a repairer straight away. If you turn the vehicle off you might not get it started again.

Oct 10, 2012 | 2000 Ford Explorer

1 Answer

2001 Hyundai Tiburon will not go in reverse, but drives fine otherwise.


Hi There,

As demonstrated in the test drive of the vehicle, the Tiburons gearstick has a little groove just passed the crown. Starting in nuetral - lift groove up and put it into the reverse position (where gear 6 is normally) by doing this lift you take the gear box to a second level. to move out of reverse simply take the gearstick and return it to nuetral then into first gear, you are now able to drive forward.

Hope this helps,

Cheers Buckaroo,
Chris.

Jul 10, 2010 | 2001 Hyundai Tiburon

1 Answer

Here are the issues with my 2000 Subaru Legacy L with 5 speed manual transmission: 1. ABS light illuminates when transmission is put in reverse and remains illuminated until car is turned off. 2. Reverse...


These assorted problems usually come from the control modules, in this case the transmission control module (TCM)
First, reset al ECM' by removing the battery negative terminal for a minute or so then re-fit it. This reset should cure all your problems. If not I shall consult my TSB's after you post the results of the reset.

Mar 24, 2010 | 2000 Subaru Legacy

1 Answer

I can shift into any gear but only first is engaged.


One of the gearstick joints has disconnected - hopefully not actually inside the gearbox. Gearstick connects to gearbox via a few rods & joints or a pair of cables in sheaths. Check something visibly moves near the gearbox no matter what movement the gearstick makes.

Sep 09, 2009 | 1999 Volkswagen Beetle

1 Answer

Once in Drive, Jeep does not easily shift back to Park


Try to check the trans mission gears of your 1995 jeep grand cherokee.The shift fork and the clutch sleeve of the trans mission is locking to the other gears .And then also check the starter motor and its solenoid.if the starter motor solenoid is destroyed or worn out replace .

Jul 28, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Gearbox stuck in gear


THERE ARE SOME CABLES THAT SHIFT YOUR TRANS CHECK TO SEE IF ONE OF THEM ARE BROKE.IF THEY ARE MOVEING FREELY IT IN THE TRANS

Apr 06, 2009 | 1994 Hyundai Excel

1 Answer

Bushes missing from gear stick and transfer stick


If it's a later model (post 98), then I have an idea what's happened. On the rounded ball end of the gear stick that goes in the box, there is meant to be a plastic bush that is only a very loose fit on the end of the stick. If it has dropped while either removing or replacing the gearstick, and fallen into the area at the back of where the gearstick actuates the shift rail, then apart from having a very sloppy gearstick, you won't be able to move the shift rail backwards - which is what happens when you move the gearstick forward (1st,3rd,5th). This should be fixable from in the cab. Of course, if you have an earlier model, none of the above applies, as you have the gearstick moving only one of a choice of three shift rails with no bush in that area. The only thing that happens to those is the spring on the gearstick breaks (that can't be replaced on its own!)

Mar 30, 2009 | Suzuki Vitara Cars & Trucks

1 Answer

Manual gearbox query


hi fro uk this is a common problem on many cars not just hyundai and ita most common cause of synchro mesh failure on2nd and 3rd gear is believe or not a bad driving habit! it goes like this when you set off in 1st then cange up 2nd gear whilst accellerating holding gearstick? in back position then change up 3rd gear still holding gearstick! in a forward position then? when up to 4th gear we let go of gearstick?? now just by holding g/stick whilst in 2nd and 3rd the slightest pressure also brings the synchro ring into play whilst gear already selected! so inevitably the synchro ring wears away to extent that they no longer work properly so the gearbox is none synchromesh on 2nd 3rd gears and on occasions? on 5 speed box 4th gear can become a victim ? hope you understand ? just quietly observe some peoples habits with manual boxes? as for repairs?cost? this is not a difficult job to replace all synchro rings but box has to be stripped and assesed ? the cost could escalate? but if you want quick turnround? a matter of hours? a recon box with warranty? is other option ? BUT would not advise risking a 2nd hand box probably worse or same as ? whichever choice you take you can check clutch at same time if milage is high? now some good advice! personally this is not a dire problem just a niggleproblem which if you take time in changing gears you can o/come gritty gear change save money for now till it is more affordable ? if you know any old timers truck drivers ? these are the guys who will show you how to drive /change gears none synchro mesh before it was ever invented ? hope this helps daughter but practice on gears and rid of the bad driving habit so many do not realise they have will make her a better experienced!driver

Oct 31, 2008 | Hyundai Motor 1998 Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...