Question about 2002 Suzuki XL-7
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
3 step torque: 25 Ft-lb, 35 Ft-lb, 50 Ft-lb.
Valve lash: Both for intake and exhaust: 0.15 MM
Posted on Oct 09, 2009
Testimonial: "Great , many thanks"
Install cylinder head to block.
After applying oil to cylinder head bolts, tighten them gradually
(1)Tighten all bolts to 53 N.m (5.3 kg-m, 38.5 lb-ft) according to
numerical order in sequence
(2)In the same manner as in (1), tighten them to 84 N.m
(8.4 kg-m, 61.0 lb-ft).
(3) Loosen all bolts until tightening torque is reduced to 0 in reverse
order of tightening.
(4)In the same manner as in (1), tighten them to 53 N.m
(5.3 kg-m, 38.5 lb-ft).
(5) In the same manner as in (1) again, tighten them to specified
torque....105 N.m (10.5 kg-m, 76.0 lb-ft)
This was taken from SQ416 manual from www.suzukinfo.com
I hope this helps.
Posted on Jul 22, 2011
the USA 2.0L engine, key words, country and engine size.
the 1million post with guy working an engine can say what is there.
amazes me. .that....
its been posted on fixya before , the 2.0L engine.
did you search, answer , no....
and want both, but failed to ask it bolts are
2: OR TTY
That is first on all modern engines.
as is do i use degree';s or torque on this engine?>
do so on all engines.
why not use the FSM book from suzuki and read.
like we do, we look read and know.
in 5mins work.
so ill login to my carppy online clone of above
and say what's there.
why ask for internet rumors on car engine rebuilding
what if the rumor was WRONG.? that work for you>?
no my rumors.. usa cars
and these words, step 1.
"Cylinder head bolts. Tighten the cylinder head bolts gradually and in the sequence shown. Tighten the cylinder head bolts to 18 ft. lbs. (25 Nm) and turn the bolts another 3 turns of 90 degrees using the angular torque gauge KM-470-B."
again, our USA 2.0L engine only,
it does not state new bolts.
end rumor off clone, FSM site , USA>.... YMMV....
your motor may vary.
Posted on Jan 01, 2016
Tips for a great answer:
Dec 10, 2015 | Dodge Cars & Trucks
Sep 19, 2013 | 1996 Saturn SL
Jul 22, 2011 | Suzuki Vitara Cars & Trucks
May 31, 2011 | 1993 Mazda MPV
Oct 21, 2010 | Toyota Passenger Cars & Trucks
May 12, 2010 | 1998 Toyota Sienna
Nov 26, 2009 | 1992 Buick Century
Jul 18, 2009 | 1999 Nissan Sentra
Feb 01, 2009 | 1997 Dodge Avenger
40 people viewed this question
Usually answered in minutes!