Question about 2004 Audi A4
Can w have a diagram how to fit the alternator belt
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello m_hueffer, my name is JShreader. Thank you for choosing fixya.com.
Here is the diagram you requested...
I hope this helps you. If you have any more questions or need any more diagrams, please don't hesitate to ask...Thanks again, JShreader!
Posted on Apr 01, 2009
Ribbed Belt: Service and Repair
Ribbed Belt, Removing and Installing
Ribbed belt, removing and installing
CAUTION: Mark the direction of belt travel before removing, using a crayon or marker. Reinstalling a used belt in the opposite direction
could damage the belt
Note: There are two different types of ribbed belt, identified as versions A and B.
Ribbed belt versions, identifying, refer to Application and ID
Old version A
- Remove ribbed belt guard.
- Loosen ribbed belt tensioner using 15 mm wrench and drift 3204.
- Remove ribbed belt.
New version B
- Using 10 mm hex socket wrench, turn downward in direction of arrow to loosen ribbed belt.
Install in reverse order of removal, noting the following:
- Place ribbed belt over drive pulleys and idler roller first, and onto tensioning roller last.
- Remove drift 3204.
- Install ribbed belt guard.
Posted on Oct 02, 2009
With volt meter on battery start car and read voltage. When yo first put the meter on a full charged battery it should read between 13-15 volts. When you first start motor the voltage should go 3-4volts higher then when you first put it on. And then tapper down after awhile. If there is no voltage increase after start alternator is out.
Posted on Jan 20, 2010
Testimonial: "yup it is the alternator, trickle charged the battery and it held. After running car, it drained."
The serpentine belt routing diagram for 1998 Audi A4 Quattro 2.8 liters V6 engine:
CS = Crankshaft
F = Fan pulley
Gen = Alternator
T = Tensioner pulley
AC = Air Conditioning
PAS = Power Assisted Steering
Posted on Nov 27, 2010
Tips for a great answer:
Oct 10, 2015 | Toyota Cars & Trucks
May 12, 2014 | 2004 Audi A4
Apr 15, 2014 | 2006 Opel Corsa 1.4
Jan 04, 2014 | 2001 Citroen Xsara Picasso
Jan 20, 2012 | Cars & Trucks
Jan 17, 2011 | 1999 Audi A4
Nov 26, 2010 | 1998 Audi A4
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: