Question about 1985 Toyota Pickup
Shop repair manual toyota pickup 85 i need to don load a manual thats all
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
it is not very hard long as u buy a kit from the wreckers of the same model car and engine it will all bolt up make sure u ask for all the bolts as well make sure u have plenty of time up yor sleve
Posted on Dec 21, 2008
Negative battery cable. On vehicles equipped with an air bag, wait at least 90 seconds before proceeding Battery Air cleaner assembly Throttle cable from the throttle body Cruise control actuator cover and connector, if equipped Ground wire Starter Speed sensor connectors, direct clutch speed sensor, and the park/neutral position switch connector on the transaxle Solenoid connector on the transaxle Shift control cable Oil cooler hoses Front side transaxle mounting bolts Front engine mounting bolts Oil cooler line mounting bolts from the front frame Upper transaxle to engine mounting bolts
Fig. Tie the steering rack to the engine support fixture components, as shown-Avalon and Camry
Front exhaust pipe Engine side covers and undercovers Both halfshafts Front side engine mounting nut Rear side engine mounting bolts (remove hole plugs) Left side transaxle mounting bolts Steering gear housing Front frame assembly Rear end plate mounting bolts Torque converter cover Torque converter retaining bolts Remaining transaxle mounting bolts Transaxle
Posted on Apr 09, 2009
manual trannis don't have a dipstick. they got an fill and drain plug. if you locate the fill plug fluid should be able to put your finger in there and feel fluid.
Posted on Jan 24, 2010
Take it to an experienced mechanic, if this isnt done correctly other problems will occur, including major engine damage!! Hopefullythis helps!!
Posted on Mar 17, 2010
On a 1984 Toyota I would look for a screw to set the low speed idle on the carburetor, if so equipped. Turn the screw until the RPMs are reasonable.
If you can maintain a smooth idle by adjusting the screw your home free.
If not, then there could be other problems with your vehicle's emission, ignition, comprression, or fuel.
Posted on Jul 07, 2010
Tips for a great answer:
May 15, 2014 | 2008 Toyota Camry
Sep 12, 2011 | 1989 Toyota Camry
Sep 09, 2011 | 1985 Toyota Pickup
Jan 31, 2011 | 1985 Toyota Pickup
Sep 02, 2010 | 1993 Toyota Pickup
May 02, 2010 | 1988 Toyota Pickup
Mar 15, 2010 | 1997 Toyota Land Cruiser
Mar 28, 2009 | 1995 Toyota 4Runner
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: