Question about 2000 Jeep Grand Cherokee
Whern i turn the key on a light with a key in a circle with a line comes on along with check gages ight, what is the problem?
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
this vehicle has three sensors two front and one on the rear end this sounds like most of your problems but have all your brakes checked .thank for your question
Posted on Feb 01, 2009
SOURCE: 98 Jeep Cherokee Fog lights
It's definitely the switch...I bought two of 'em so far...known bug. I don't use the fog lights as much anymore , but the "Airtex" oem equivalent switch from Rockauto seems to be holding up well. If you dissamble your broke switch you'll probably see evidence that it is beginning to melt and theres alot, maybe too much, grease, which may or may not have been the cause of the bad, heating contacts inside switch.
If I remember right, even though the foglights have a relay there is still full amperage going through the switch or something....don't qoute me on that last statement.
Posted on Feb 14, 2009
i have a 2002 jeep grand cherokee i had the same problem when i would apply my brakes when the headlights were on my brake lights would go out, i found that my bulbsocket was not making good contact with the socket housing, if you notice when you take off a bulb, look at the light fixture where you unscrewed your breaklight bulb you will notice 3 medal contacts-they should be silver in the socket housing and like a copper on the socket bulb, in the socket housing their should be 2 silver contacts together and 1 by itself the one that looks by itself is making bad contact with the copper one thats by itself on the bulb, what you can do for a quick fix is; get a small piece of low cage wire or a thin piece of metal like copper stick that in to the bottom or top of that metal contact--i did it through the bottom leave the wire or piece of medal sticking out enough for where it can get contact with the bulb (just a little wire is enough to make contact, now screw the bulb on and test it---it will work----i did it to mine, if you need more assistance let me know email@example.com
Posted on Feb 20, 2009
on the head light switch you can rotate it either left or right and you will hear a click ...... I took the jeep to a mechanic ... and we took all the door switches out then to auto electrician over 50 euro later i found the fault my self
Posted on Apr 09, 2009
check the fuel pump fuse/relay, could be just bad enough to cause an intermittent start/no start. and check fuel pressure,spark and the crank position sensor.
Posted on May 27, 2009
Tips for a great answer:
Oct 15, 2014 | 2000 Jeep Grand Cherokee
Nov 18, 2010 | 2002 Jeep Grand Cherokee
Aug 02, 2010 | 2000 Jeep Grand Cherokee
Dec 02, 2009 | 2000 Jeep Grand Cherokee
Mar 28, 2009 | 2000 Jeep Grand Cherokee
Dec 30, 2008 | 1991 Jeep Cherokee Limited
26 people viewed this question
Usually answered in minutes!