Question about 2006 Pontiac Grand Prix

Open Question

How to replace a 2006 grand prix rear bumper?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: rear brake pads

The rear calipers have to be turned back in, not pushed. There is a tool, but rather than spend the money... I have used a 11/16 wrench. Slips at first until you get it started, but then the calipers turn pretty easily.

Posted on Dec 22, 2008

kirkx
  • 2019 Answers

SOURCE: Breaks on a 2006 Grand Prix

Rear disc brakes have to also apply the parking brakes.
To do that, they must not retract too far.
That is accomplished with a one way ratched down the center of the piston, on the back side.
So most rear pistons have to be rotated CW in order to retract down this spiral ratchet.
Not sure exactly how Pontiac works, but there is probably a large slot in the piston to allow for this.

Posted on Jun 26, 2009

  • 42 Answers

SOURCE: I just need a diagram of the rear suspension for a

I don't have a diagram but i may be able to help. The rear has struts and two control arm links...one is adjustable for toe.

Posted on Jan 06, 2010

kb8dns
  • 494 Answers

SOURCE: replace rear strut mounts

Not too hard but you have to remove the wheels and go into the trunk to remove the to nuts, under a cover.....

Posted on Feb 14, 2010

  • 2 Answers

SOURCE: How to remove the rear bumper cover on a pontiac

  1. Open the trunk.
  2. Remove the rear compartment sill plate. (Trim round the back edge of the trunk)
  3. Pull the left and right compartment side trim panels down to access the fascia bolts and nuts.
  4. Remove the tail lamps.
  5. Remove the fascia bolts and nuts from the rear bumper fascia 1 nut 1 bolt on each side near tail lights.
  6. Remove the push-in retainers from the top edge of the fascia.(4 plastic circles, pull up on center of cirle with screwdriver
  7. Raise and support the vehicle.
  8. From underneath Remove the push-in retainers from the rear bumper fascia (one on each side I think)
  9. Remove the fascia bolts from the rear bumper fascia. on on each side from, up where the facia connects to the quater panel)
  10. Remove the rear bumper fascia from the vehicle

Posted on May 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear strut assembly 17 Inch Wheels


are you looking to by the parts or have them done by a professional shop like unique auto care , 611 main st, Wilmington , MA 01887
give us call if you do.

Apr 20, 2014 | 2006 Pontiac Grand Prix

1 Answer

I need to replace the rear fog light cover in the bumper of a 2006 grand cherokee. Do I need to take the bumper off to do so?


FSM 101 or the parts list. shows this.
the parts list show 2 types.
one in the main lamp. ID 7 in drawing
then the optional bumper fog kit, rear.
so bumper. but since its and option, its not that well covered.
not in fsm i bet. did you look.?
so here is my best guess.
the kit shows NO SCREWS.
so just pry's off
see it here.

http://www.factorychryslerparts.com/showAssembly.aspx?ukey_product=4612193&ukey_assembly=1122497

or im wrong and you must gain inside access
to trip the plastic locking lever on lamp.
as you see the lens is not SOLD.
so?

Mar 31, 2014 | 2006 Jeep Grand Cherokee

1 Answer

How to replace the heater hose fitting for 2006 pontiac grand prix


Drain approximately two-thirds of the brake fluid from the master cylinder reservoir. Lift the rear of the Pontiac Grand Prix off the ground with a car jack. You can read more at http://www.ehow.com/how_4520075_replace-rear-disc-brakes-pontiac.html------------------------------------------------------------------------------------
Launch Creader VI

Feb 20, 2013 | 2006 Pontiac Grand Prix

1 Answer

How to remove the rear bumper cover on a pontiac 2004 grand prix


  1. Open the trunk.
  2. Remove the rear compartment sill plate. (Trim round the back edge of the trunk)
  3. Pull the left and right compartment side trim panels down to access the fascia bolts and nuts.
  4. Remove the tail lamps.
  5. Remove the fascia bolts and nuts from the rear bumper fascia 1 nut 1 bolt on each side near tail lights.
  6. Remove the push-in retainers from the top edge of the fascia.(4 plastic circles, pull up on center of cirle with screwdriver
  7. Raise and support the vehicle.
  8. From underneath Remove the push-in retainers from the rear bumper fascia (one on each side I think)
  9. Remove the fascia bolts from the rear bumper fascia. on on each side from, up where the facia connects to the quater panel)
  10. Remove the rear bumper fascia from the vehicle

Apr 14, 2011 | 2004 Pontiac Grand Prix

1 Answer

Where is the fuel filter on a 2006 pontiac grand prix gt


Pontiac stopped installing the fuel filter on the rail in 2006. The 2004-2005 models had a fuel filter on the driver's side under the rear passenger seat area clipped to the frame. 2006 beyond the fuel filter is part of the fuel pump unit inside the tank.

May 21, 2010 | 2006 Pontiac Grand Prix

1 Answer

2006 jeep grand cherokee bumper removal


check your metal bumper retainers attached to the front chassis there must be a hidden bolts and nuts thats still on that you havent seen yet remove it and take off the bumper bar( steel bumper)

Apr 07, 2010 | 2006 Jeep Grand Cherokee

1 Answer

I just need a diagram of the rear suspension for a 2006 grand prix


I don't have a diagram but i may be able to help. The rear has struts and two control arm links...one is adjustable for toe.

Jan 01, 2010 | 2006 Pontiac Grand Prix

2 Answers

Breaks on a 2006 Grand Prix


Rear disc brakes have to also apply the parking brakes.
To do that, they must not retract too far.
That is accomplished with a one way ratched down the center of the piston, on the back side.
So most rear pistons have to be rotated CW in order to retract down this spiral ratchet.
Not sure exactly how Pontiac works, but there is probably a large slot in the piston to allow for this.

Jun 26, 2009 | 2006 Pontiac Grand Prix

1 Answer

Identify a part on the front bumper, 07 Pontiac Grand Prix


the is the radiator air dam it is also known as the front spoiler.

Feb 09, 2009 | 2007 Pontiac Grand Prix GXP Sedan

Not finding what you are looking for?
2006 Pontiac Grand Prix Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...