Question about 2004 Hyundai XG350

Open Question

WHERE LOCATION OF FACTORY AMP 2004 HYUNDAI XG350

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fischmilch
  • 96 Answers

SOURCE: where is the fuel filter on 2004 hyundai xg350

It is most likely in the fuel tank

Posted on Mar 09, 2009

ghost4548
  • 776 Answers

SOURCE: program factory remote keyless entry for 2003 Hyundai XG350

This bulletin supersedes TSB# 02-90-001.
DESCRIPTION: The security system keyless adapter cable (SPX/Kent-Moore P/N 09900-21300) is a special service tool (SST) that is used for programming new keyless entry remote transmitters to the factory security systems. The keyless adapter is used in conjunction with the Hi-Scan Pro (with Hi-Scan SOL Pro Software Version 09-29-03
or newer) and Data Link Connector (DLC) Cable. SERVICE INFORMATION: The keyless adapter cable can be used on the following vehicles:

  • 2001 - 2004 MY Elantra
  • 2001 - 2004 MY Santa Fe
  • 2002 - 2004 MY Sonata
  • 2001 - 2004 MY XG300/350 0390020a.gif
NOTE
  • The 2003 - 2004 MY Tiburon does not need the Keyless Adapter Cable to add keyless entry remotes to the factory security system. Instead, the Hi-Scan Pro connects to the vehicle using only the DLC cable. See page BE-60 in the 2004 MY Tiburon Shop Manual for the latest instructions.
  • The most current Keyless Adapter Cable Instructions are available in the following shop manuals:
SHOP MANUAL

PAGES

2004 MY Elantra
BE-73 - BE-74
2004 MY Santa Fe
BE-43 - BE-44
2004 MY Sonata
BE-40 - BE-41
2004 MY XG350
BE-46 - BE-47
KEYLESS ADAPTER CABLE INSTRUCTIONS:
  1. Connect the keyless adapter cable to the Hi-Scan Pro DLC cable. 0390020b.gif
  2. Plug the keyless adapter into the vehicle's 10-pin multi-purpose connector located behind the driver's side lower instrument panel (next to the DLC). NOTE Sample vehicle shown is the Santa Fe.
    0390020c.gif
  3. Turn the Hi-Scan Pro ON
    and press ENTER
    . NOTE "Release date 29. Sep. 2003" OR LATER
    must appear on this screen. To update your SOL card with the latest software go to www.hmaservice.com and refer to TSB 00-00-001.
    0390020d.gif
  4. Select option "HYUNDAI VEHICLE DIAGNOSIS"
    and press ENTER
    . 0390020e.gif
  5. Select vehicle model and press ENTER
    . 0390020f.gif
  6. Select option "TRANSMITTER CODE SAVING"
    and press ENTER
    . 0390020g.gif
  7. Ensure that the key has been removed from the ignition cylinder before proceeding. 0390020h.gif
  8. Follow the steps noted on the Hi-Scan Pro screen to program the remote(s). NOTE The factory security system can only be programmed to accept two remote transmitters and MUST be programmed for both remote transmitters at the same time.
    0390020i.gif
  9. Press ESC
    on the Hi-Scan Pro and verify that the remote(s) are functioning properly.
  10. Turn the Hi-Scan Pro OFF
    and disconnect the adapter cable from the multi-purpose connector.

Posted on May 31, 2009

  • 73 Answers

SOURCE: how to change spark plugs 2004 hyundai XG350

GO TO AUTOZONE.COM

Posted on Aug 06, 2009

  • 840 Answers

SOURCE: where is the fuel filter located on a 2004 hyundai

Welcome to fixya.
Under the vehicle at the left front corner of the fuel tank.
If you need anything or schematics go to www.collisionrepairadvice.com

Posted on Aug 10, 2009

c17hydro
  • 2984 Answers

SOURCE: I need to replace a fuel filter for a 2003 hyundai

Please don't forget to rate!!!


NOTE The fuel filter is located underneath the car, near the fuel tank.

  1. Before servicing the vehicle, refer to the Precautions section.
  2. Relieve the fuel system pressure.
  3. Remove or disconnect the following:

    Negative battery cable Fuel supply and pressure lines Fuel filter bracket, if equipped Fuel filter
3dcb13b.jpg
Fig. Remove the fuel filter


  1. Install or connect the following:

    Fuel filter and torque the mounting bolts to 18-25 ft. lbs. (25-35 Nm) Fuel filter bracket, if equipped Fuel supply and pressure lines Negative battery cable
  2. Start the engine, check leaks and repair if necessary.

Posted on Oct 09, 2009

Testimonial: "great help, thxx "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Hyundai xg350L inertia fuel control switch location?


Vehicle handbook should provide the location which is often either under the bonnet close to the bulkhead or behind one of the front footwell kick panels.
When the switches were first introduced the spare wheel well was used.

Mar 23, 2017 | 2004 Hyundai XG350

1 Answer

Radio/amp wiring diagram 2004 hyundai xg350 ?


2004 Hyundai XG350 Car Stereo Radio Wiring Diagram
Car Radio Constant 12v+ Wire: Red
Car Radio Switched 12v+ Wire: White/Green
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Brown/White
Car Stereo Dimmer Wire: Green
Left Front Speaker Positive Wire (+): Brown/White
Left Front Speaker Negative Wire (-): Black/White
Right Front Speaker Positive Wire (+): Brown/Yellow
Right Front Speaker Negative Wire (-): Black/Yellow
Left Rear Speaker Positive Wire (+): Brown/Red
Left Rear Speaker Negative Wire (-): Black/Red
Right Rear Speaker Positive Wire (+): Brown/White
Right Rear Speaker Negative Wire (-): Black/White

Dec 22, 2016 | Hyundai Cars & Trucks

1 Answer

Change crank sensor in 2004 Hyundai xg350


Some of these are hard to locate (I don't know your engine) but parts stores have component location charts. On some engines you have to look down through the intake manifold runners to see it, and reaching it to replace can require laying on top of the engine with your hands working blind. Others can be accessed from underneath.

Jul 06, 2016 | 2004 Hyundai XG350

1 Answer

2004 Hyundai xg350. Wipers quit working. What steps do i take to see if its a motor or fuse etc.?


Search Results

    02 XG350 air, sunroof, seat warmers, and intermittent wipers quit ...

    www.hyundai-forums.com/.../149142-02-xg350-air-sunroof-seat-warme...

    Sep 27, 2012 - 9 posts - ‎5 authors
    An automotive shop pulled up the car and said their was a fuse box with a lot of relays in it on the passenger compartment .... 2004 XG350L .... Same thing happened to me, 2002 XG350, sunroof, blower, vanity light all out.

    Hyundai XG350 wipers not working Questions & Answers ...

    www.fixya.com > ... > wipers not working > Cars & Trucks > Hyundai
    Hyundai XG350 cars & trucks wipers not working questions and answers. Ask your Hyundai wipers not working related question. ... 2004 Hyundai XG350.

    Hyundai wipers not working Questions & Answers - Fixya

Dec 03, 2015 | Hyundai Cars & Trucks

1 Answer

Alarm randomly going off remote will turn itboff but few mins later starts again


Hyundai XG350 alarm module Questions & Answers - Fixya

www.fixya.com > ... > Tags > alarm module > Cars & Trucks > Hyundai
Hyundai XG350 cars & trucks alarm module questions and answers. Ask your Hyundaialarm ... TURN IGNITON TO ON 4. WAIT 5 ... Hyundai Motor 2005 XG350.

Aug 27, 2015 | Hyundai Motor 2005 XG350

1 Answer

Where is freeze plug located on 2004 hyundai xg350?


the freeze plug is located on the side of engine block and is a regular water pipe plug. if is ieaking you will be found easy.and go to any auto parts and buy a radiator flush follow the can intructions and add the antifreeze easy job .

Jul 24, 2012 | 2004 Hyundai XG350

1 Answer

Where is the fuse for the dashboard for a 2004 Hyundai xg350


dashboard light stay on when i start the car, for hyundai 2004

Sep 18, 2011 | 2004 Hyundai XG350

1 Answer

Where is the fuel filter located on a 2004 hyundai xg350


Welcome to fixya.
Under the vehicle at the left front corner of the fuel tank.
If you need anything or schematics go to www.collisionrepairadvice.com

Aug 10, 2009 | 2004 Hyundai XG350

1 Answer

Program factory remote keyless entry for 2003 Hyundai XG350


This bulletin supersedes TSB# 02-90-001.
DESCRIPTION: The security system keyless adapter cable (SPX/Kent-Moore P/N 09900-21300) is a special service tool (SST) that is used for programming new keyless entry remote transmitters to the factory security systems. The keyless adapter is used in conjunction with the Hi-Scan Pro (with Hi-Scan SOL Pro Software Version 09-29-03
or newer) and Data Link Connector (DLC) Cable. SERVICE INFORMATION: The keyless adapter cable can be used on the following vehicles:
  • 2001 - 2004 MY Elantra
  • 2001 - 2004 MY Santa Fe
  • 2002 - 2004 MY Sonata
  • 2001 - 2004 MY XG300/350 0390020a.gif
NOTE
  • The 2003 - 2004 MY Tiburon does not need the Keyless Adapter Cable to add keyless entry remotes to the factory security system. Instead, the Hi-Scan Pro connects to the vehicle using only the DLC cable. See page BE-60 in the 2004 MY Tiburon Shop Manual for the latest instructions.
  • The most current Keyless Adapter Cable Instructions are available in the following shop manuals:
SHOP MANUAL

PAGES

2004 MY Elantra
BE-73 - BE-74
2004 MY Santa Fe
BE-43 - BE-44
2004 MY Sonata
BE-40 - BE-41
2004 MY XG350
BE-46 - BE-47
KEYLESS ADAPTER CABLE INSTRUCTIONS:
  1. Connect the keyless adapter cable to the Hi-Scan Pro DLC cable. 0390020b.gif
  2. Plug the keyless adapter into the vehicle's 10-pin multi-purpose connector located behind the driver's side lower instrument panel (next to the DLC). NOTE Sample vehicle shown is the Santa Fe.
    0390020c.gif
  3. Turn the Hi-Scan Pro ON
    and press ENTER
    . NOTE "Release date 29. Sep. 2003" OR LATER
    must appear on this screen. To update your SOL card with the latest software go to www.hmaservice.com and refer to TSB 00-00-001.
    0390020d.gif
  4. Select option "HYUNDAI VEHICLE DIAGNOSIS"
    and press ENTER
    . 0390020e.gif
  5. Select vehicle model and press ENTER
    . 0390020f.gif
  6. Select option "TRANSMITTER CODE SAVING"
    and press ENTER
    . 0390020g.gif
  7. Ensure that the key has been removed from the ignition cylinder before proceeding. 0390020h.gif
  8. Follow the steps noted on the Hi-Scan Pro screen to program the remote(s). NOTE The factory security system can only be programmed to accept two remote transmitters and MUST be programmed for both remote transmitters at the same time.
    0390020i.gif
  9. Press ESC
    on the Hi-Scan Pro and verify that the remote(s) are functioning properly.
  10. Turn the Hi-Scan Pro OFF
    and disconnect the adapter cable from the multi-purpose connector.

May 22, 2009 | Hyundai Motor 2003 XG350

Not finding what you are looking for?
2004 Hyundai XG350 Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...