Question about Daewoo Cars & Trucks

Open Question

How do you remove interior of Daewoo Nubira Wagon for rear strut replacement?

Took out rear speakers and found no screws or bolts. How do I get at the top nut holding the strut in place? Thanks.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 45 Answers

SOURCE: rear struts replacement

It's kinda hard to explain on line but I think you need to remove the rear seat back which you might have to remove the sitting portion to get that out. Once the seat back is out of the way most of the parcel shelves slide foreward. I've done this on some newer BMWs and the plastic on the sides needed to be removed also. If you could post a picture of the whole rear shelf area I could probably help you more.

Posted on Aug 12, 2008

Ad
  • 24 Answers

SOURCE: 97 Taras sedan SE style rear stut top bolt and nut location.

The top nuts are located from inside of the trunk. If you look behind the material that covers the wheel wells you should find the nuts near the top of the wheel wells.

Posted on Nov 30, 2008

fingaz22
  • 1068 Answers

SOURCE: I am replacing the rear struts on my 98 toyota xls

upper nuts 36 lbs and the bottom two big ones are 145 lbs and the upper mount to body are 29 lbs. good luck man

Posted on Oct 18, 2009

pugwash814
  • 377 Answers

SOURCE: need to remove cargo panels to get to the top of the rear struts

the is a plastic panel is held on with a screw behind a plastic pug, pull the plug undo the screw/bolt and remove upper trim, then you should see the 3 bolts holding the top mount..

Posted on Nov 15, 2009

dennymulford
  • 1055 Answers

SOURCE: remove nut at top of rear struts on 97 buick lesabre

in the trunk pull back the liner!!!!!!!!!

Posted on Dec 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to access the fuel pump on my Daewoo Nubira Wagon, 1999. I'm having trouble getting the back seat up so that I can access the fuel tank. Which bolts need undoing? How do I go about this?


USUALLY YOU CAN SEE THE BOLTS TO THE BOTTOM OF THE BACK SEAT! THEY WILL BE IN PLAIN SIGHT! IF NOT, YOU'LL NEED TO PUSH HARD ON THE FRONT OF THE BACK SEAT, TO CLEAR THE CLIPS UNDERNEATH IT! THEY MAY BE LIKE A HOOK! SO THE BASE OF THE SEAT WILL HAVE TO BE PUSHED BACKWARD, AND RAISED TO CLEAR THE CLIP, AND REMOVE THE SEAT!

Feb 28, 2011 | 1999 Daewoo Nubira

1 Answer

How do I change the struts in my 2001 Daewoo Nubira?


I think you should find out an illustarted explanation for what you just asked for and i'll see if i can find you one, because changing struts for the first time can be dangerous, and DO NOT open the centrale bolt on the struts that hold the spring compressed until you have the tool to compresse the spring.

Dec 06, 2010 | 2001 Daewoo Nubira

2 Answers

How do i replace a 1998 daewoo nubira clutch


You take out the gearbox to access the clutch.

Aug 30, 2010 | Daewoo Nubira Cars & Trucks

1 Answer

Need to remove cargo panels to get to the top of the rear struts


the is a plastic panel is held on with a screw behind a plastic pug, pull the plug undo the screw/bolt and remove upper trim, then you should see the 3 bolts holding the top mount..

Nov 13, 2009 | 2005 Subaru Outback

2 Answers

2000 Daewoo Nubira camshaft position sensor


on the front under timing belt cover ,back cam ,if its not their then back of head about 3inches along from the gear wheel end

Sep 11, 2009 | 2002 Daewoo Nubira

1 Answer

Sideward pull on some shifts and a seriuos leftside **** at speed


its sounds like the front wheel drive engine is able to produce more torque steer than it used to when it was new? you will get a little of this from most front wheel drive engines anyway. I would check and replace bushings,
tie rod ends
lower ball joints
upper strut mounts and upper mount brackets
I would also replace the front swaybar bushings. if you replace the strut mounts you may as well replace the front strut while you already have them off.
this will have a cost though to replace these items but this issue could become unsafe if you continue to drive it if it gets progressively worse.

Jun 17, 2009 | 2002 Daewoo Nubira

1 Answer

Daewoo Nubira Starter Motor Refit.


changed a clutch on one of these a few weeks ago and cant remember what i done ,old timers i think ?? not sure but its from below with a rear support bracket ,and a inlet manifold stay bar ,,,3/8 drive socket set with a knuckle and 3 long extension bars to get to top inside bolt as well i think ?? honestly cant remember ,i work on all makes and cant remember every one

Apr 14, 2009 | 1999 Daewoo Nubira

2 Answers

Change alternator on daewoo nubira


first you need to remove the belt . there are only several bolts to remove the alternator . there should be a diagram on the panel by the hood prop rod to show the belt route

Feb 18, 2009 | 2000 Daewoo Nubira

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...