Question about 2004 Infiniti FX35

Open Question

Check engine, slip, and VDC light on in my - 2004 Infiniti FX35

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Why is the check engine, slip, and VDC light on

All three lights came on at the same time while I was driving last month. The dealer said it was the sensors. Had them replaced for about $750

Posted on Mar 11, 2010

tunde007
  • 2382 Answers

SOURCE: The AWD slip differential light is illumnated,

Hi, this will require you to have the engine CPU scanned for trouble code's. This can only be administered with the assistance of a diagnostic computer scan tool. You can purchase this tool, at your local auto parts store, or you can just have the scan ran at your local auto zone parts store, free of charge. Once the diagnostic scan is administered, you will be able to isolate the issues that have caused the check engine light, VDC light and AWD light to illuminate.
This scan tool will display a print out code and the location of the issue, on the engine, as well. There are Many issues that will cause the engine light to illuminate, but the most common cause will be a failed monitoring sensor, or sensor harness failure(separated power wire, or ground).
After retrieving the code, it will be interpreted to know what caused the lights to come up and that will be used to fix the problem.

Posted on Nov 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake light slip vdc


Check the brake fluid level if it is low do not add. Check the front and rear brake pad if the pad are bad reinstall with a new and
the brake fluid return back to the fluid reservoir
and the system function and all the light on dash turn off

Jul 18, 2014 | Nissan Pathfinder Cars & Trucks

1 Answer

What does Brake light,VDC light and slip lights on . This happened when brake pedal pulsates,but I do have brake pedal.


See if the following information helpful:
1. Keep an eye on the dashboard for the indicators marked "SLIP" and "VDC Off" which will tell you the status of the computerized handling system if handling isn't normal. "SLIP" will blink when VDC is operating. "VDC OFF" means the system is off. Turn the VDC system back on if the Nissan's handling is poor by pressing the "VDC Off" button until the light goes out.

2. Adjust your driving if "SLIP" comes on. "SLIP" means the road conditions may be slippery. The VDC aids in steering and stopping, but be careful, even if VDC is engaged.

3. Remove any aftermarket suspension parts like enhanced shock absorbers if the "VDC Off" light comes on and handling is bad. The VDC system is geared for stock equipment and tires only. Use winter tires or snow chains on snow-covered roads. VDC won't substitute for the correct winter equipment.

4. Don't drive on very inclined corners with high banks and leave the VDC switch on if the handling is poor with VDC on. The system can't operate properly in that environment. Disengage VDC, or avoid those kinds of roads.

May 21, 2014 | 2004 Nissan Titan

1 Answer

I drive G35X - 'VDC OFF' and ''SLIP" lights are


VDC OFF light will always be off unless you turn it off (this is for traction control). The slip light should not be on however, unless you are driving in rain/snow and the VDC is activated.

Feb 09, 2011 | 2007 Infiniti G Sedan

1 Answer

My brake, slip and VDC indicators stay on.


Check brake fluid level, add fluid from sealed container if needed.

Also check for leaking rear axle seals. Look for oil on the inside of rear wheels.

May 06, 2010 | 2004 Nissan Titan

3 Answers

Why is the check engine, slip, and VDC light on


All three lights came on at the same time while I was driving last month. The dealer said it was the sensors. Had them replaced for about $750

Mar 05, 2010 | 2004 Infiniti FX35

1 Answer

Loss of Power, VDC light and Slip light comes on


Have ther codes checked that are making the engine light come on first.

Sep 15, 2009 | 2005 Nissan Pathfinder

1 Answer

No solution yet


VDC/ OFF light is still ON only ? or also SLIP + VDC/OFF ?

if VDC/OFF only u must check ur brake fluid status if both VDC and SLIP u still have problems with ur ABS module and steering wheel


Jun 15, 2009 | 2008 Nissan Xterra

1 Answer

Replaced braked pads - now VDC and Slip Lights are on


I would take the car to almost any auto parts store and ask them to check the ODB II computer for codes and to reset the "Check engine light". Get the code that they tell you and it should go a long way to pointing you in the right direction to fixing this problem. It might also be that when you pumped the brakes that you somehow set a code in the computer from the ABS system and now that you have the brakes pumped up and working correctly resetting the Check engine light might fix your problem.

Good luck! Write back with any code you get and I'll see if I can help you figure out what the problem might be.

Jan 06, 2009 | 2004 Infiniti G35 Sport Coupe

1 Answer

Sometimes when i take off fast a slip light comes on does that mean my transmission is slipping?


I found your answer here:

Why Does the SLIP Light Come on?
The SLIP light represents the vehicle's traction control program. When illumiated it takes over control of throttle and braking based on input from a myriad of sensors. The VDC (traction control) is initiated by wheel slip, yaw and any other factors that make the computer think you're on the verge of loosing control of the vehicle. There have been a lot of complaints about the G35's VDC being too interferring and actually causing harder driving conditions. The VDC can be turned off via a switch to the lower left of the steering wheel (useful if trying to pull out of a snowy spot when wheel spin is necessary, or "spirited" accelerating). Even with the VDC turned off, however, it will still kick in if it detects substantial loss of control. NOTE: if you plan on racing, turn the VDC off. Otherwise it will ****** the throttle when you chirp the wheels from 1st to 2nd gear.

Dec 21, 2008 | Infiniti G35 Cars & Trucks

Not finding what you are looking for?
2004 Infiniti FX35 Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14200 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...