Question about 2006 Chevrolet Impala

Open Question

High beam will not turn on 2006 Chevrolet Impala

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75822 Answers

SOURCE: the low beams do not work but the high beams do

replace the dimmer switch, that is the most common cause of this,.

Posted on Oct 21, 2009

  • 1 Answer

SOURCE: i need a serpentine belt assembly guide or diagram for a 2006 3.5 liter v6 chevrolet impala

Diagram 9-5 on this page:
http://www.daycoproducts.com/daycoweb.nsf/Serp%20Rout%20Guide%20Illus.pdf

Posted on Nov 14, 2009

  • 29 Answers

SOURCE: how do you replace the door handle on a 2006 chevrolet impala

Depends which door handle you are removing, Outside or inside. Both requires removal of the inner door trim panel.

Posted on Nov 30, 2009

  • 312 Answers

SOURCE: 2000 impala-low beams don't work but high does

sounds like the problem is the dimmer switch, get a price on the dimmer switch. If you have to, get one at a junk yard . It's cheaper.

Posted on Dec 31, 2009

lindsay836
  • 677 Answers

SOURCE: day time running light and low beams stopped

I would say your light switch is either dirty or bad.
www.rockauto.com

Posted on Feb 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 impala hibeam indecator on dash don't work


Most likely the instrument cluster is bad. As long as the high beams are working than the instrument cluster led driver should be getting the signal through the computer data line that the high beams are on. The led driver than grounds the circuit to illuminate the high beam indicator.

Apr 11, 2014 | 2004 Chevrolet Impala

1 Answer

Where is the headlight relay on 2006 ss impala


GM does not use a headlight relay, the switch contains a safety cut off switch to avoid short induced fires. You likely have a defective main light switch and the connector to it is also burnt.

Apr 21, 2012 | 2004 Chevrolet Impala

1 Answer

High Beams are stuck on.


it has to be the light switch or linkage to it- if you have linkage.

Feb 09, 2012 | 2000 Chevrolet Impala

1 Answer

I have a 2005 chev impala can i replace my high beams headlights with just low beam lights


NO YOU HAVE TO REPLACE HIGH BEAM LIGHT BULBS WITH HIGH BEAM LIGHT BULBS BECAUSE HIGH BEAM LIGHT BULBS AND LOW BEAM LIGHT BULBS TWO DIFFERENT TYPES OF BULBS.WEAR CLEAN LATEX GLOVES HANDLING THE HEADLIGHT BULBS WHICH IS HALOGEN LIGHT BULBS, OIL FROM FINGERS OR HAND WILL CAUSE HALOGEN BULBS TO OVER HEAT BLOW OUT.

Jul 05, 2011 | 2005 Chevrolet Impala

2 Answers

Bright lights stuck on 2003 Chevy Impala


The bright light dimmer switch will need replacing

Feb 06, 2010 | 2003 Chevrolet Impala

1 Answer

Day time running light and low beams stopped


I would say your light switch is either dirty or bad.
www.rockauto.com

Feb 04, 2010 | 2000 Chevrolet Impala

2 Answers

2005 Impala headlights. Can I have the low and high beams on at the same time? If I hold the switch just right they are both on and I can see a lot better.


The hi beams when activated will have all headlight on. If you have to hold the swith in to keep them on that means the switch will not click into the locking mode to keep them on for you. Once you pull back the lever you should hear a faint click. That will lock the high beams on. Pull it again and the same click will be heard and that releases the high beams to off

Jan 27, 2010 | 2005 Chevrolet Impala

2 Answers

2000 impala-low beams don't work but high does


sounds like the problem is the dimmer switch, get a price on the dimmer switch. If you have to, get one at a junk yard . It's cheaper.

Dec 31, 2009 | 2000 Chevrolet Impala

1 Answer

My high beams are on and i dont know how to turn it off


The high beam is normally turn on and off by the control arm on the left side of the steering wheel, just pull it slightly back and you should see the little blue high beam indicator disapear

Oct 25, 2009 | 2003 Chevrolet Impala

Not finding what you are looking for?
2006 Chevrolet Impala Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...