Question about Cars & Trucks

1 Answer

If i build a custom harley using a carburated twin cam motor out of a 99' dyna would i have use an aftermarket ignition module? I have the stock module n harness n i did away with the cam shaft position sensor and bank angle sensor im getting power to the coils and at the end of the coil where the coil wire connects but no spark does any body know why please help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,679 Answers

I'd try a new coil as power out may not be enough for spark , very difficult to measure coil output as high tension and could easily give you a bad shock or even burn you

Posted on May 13, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

CMV9
  • 594 Answers

SOURCE: 1996 Buick Regal Custom w/3.1 liter-No Spark

disconnect you battery. take something and fray back the plastic on the main hot wire on the coil. take another wire and wrapp it to the main wire you just frayed. now take that wire and run it to you ignition fuse. re connect you battery and see if your vehicle will start. if so than you have either a break or a short in you hot wire for your coil.

Posted on Aug 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 Chevy Malibu twin cam 2.4 engine runs rough while idling. I replace spark plugs, ignition coil


seldom plugs and coil
more often bad injectors , low fuel pressure or vacuum leaks

May 02, 2017 | Cars & Trucks

1 Answer

?HOW DO I SET THE CARBURATOR RODS IN PROPER ORDER SO I CAN START IT PLEASE?


on what vehicle and engine --also stock or aftermarket carb

Aug 02, 2016 | Cars & Trucks

2 Answers

I bought a 99 ford mustang without a radio installed yet there is an aftermarket radio in the back seat, the wipers are not working and i have checked the fuses they appear fine, i also pulled plug source...


Defective switch or wiring between switch and motor. The 1 wire that does have voltage is for the park function. I would pull the switch and test for voltages going into the switch, with ignition switch on, then turn the wiper switch on and see if you have any voltages coming out.

Mar 30, 2015 | Ford Mustang Cars & Trucks

1 Answer

What carburator is stock for 1984 ford bronco 2 2.8 liter


http://www.hotrodders.com/forum/carb-2-8-l-v6-1984-ford-bronco-ii-132065.html

according to the site, a <350cfm holley carb should fit right on the motor and give you no problems, this will provide some reliability and tunability as well as aftermarket support for your application compared to factory, they should be very easy carbs to find used on ebay and such

Mar 01, 2011 | 1984 Ford Bronco II

1 Answer

Drive gear on distributor wearing teeth off how


I would say if its happend more than once its a cam problem, but then again i don't know if the cam has been chg. to an aftermarket or if it is the stock cam and weather its an aftermarket distributor or a stock one, witch could play a part in your problem.

Dec 22, 2009 | 1997 Chevrolet K1500

1 Answer

'99 Saturn SC1 with intermittant check engine light P0341


a p0341 code mean cam reference performance, really it means you have a secondary ignition problem,,,,like a bad ignition module
a bad crank sensor
a high resistance spark plugs,do not use bosch platinum plugs in these cars
high resistance spark plug wires,,,i work at the dealer and the first thing we do is replace the spark plugs and wires if that dont work we replace the crank sensor,if thatdont work we reaplce the ignition mondule,and by then your fixed and you started with the cheapest items first,,,i would try plugs and wires and a crank sensor,,,,wires $50 plugs $14 crank sensor $37

Oct 23, 2009 | 1993 Saturn SC1

1 Answer

Doin a v6 to v8 old scool on a 85 monte carlo. computer was took out of car, do i need tat for a carburated car?


Answer depends on what your emissions regulations are. If you need the computer, then you will need the factory type ignition system and the electronic version of the quadrajet carburetor. If you are building a hot rod, then consider a 750 holley with a decent aftermarket aluminum manifold and an ignition upgrade.

Jul 11, 2009 | 1985 Chevrolet Monte Carlo

1 Answer

88 dodge ram le 150 318 carburated


Yes the rear seal on the rearend would cause a leak and would have to be pressed in.

Oct 09, 2008 | 1988 Dodge D-Series Pickups

1 Answer

Harley davidson big twin ignition wiring


On Dyna S DS6-1 Dual Fire Ignition Systems

The WHITE WIRE connects to the POSITIVE (+) side of the coil
The BLUE WIRE connects to the NEGATIVE (-) side of the coil

Sep 01, 2008 | 1996 Chevrolet Caprice Classic

1 Answer

Honda engine


"That's actually not a carb, it's throttle body injection. Honda stopped using carbs on cars in 1987" yes thats in america but it might have been imported!!!

as for the twin cam your not explaining exactly what you want to do????
if your on about changing engine then get back to me

Jun 19, 2008 | 1992 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...