Question about 2003 Chrysler Town & Country

Open Question

How to replace a crank sensor for a 2003 town and country 3.8l

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

short shadey
  • 421 Answers

SOURCE: location of the speed sensor on 1996 town & country

they are on the front drivers side of the transmisson and have two wires coming off them, there are two one is an input shaft sensor and the other is an output shaft sensor unless you have a 4 cyl van then there is only one sensor please rate -jeff

Posted on Sep 04, 2008

  • 4669 Answers

SOURCE: 2003 chrysler town and country speedometer quit working

It is the speedometer that doesn't work? What problem do you have? Does the transmission shift or is it stuck in 2nd?

Posted on Mar 02, 2009

  • 323 Answers

SOURCE: locassion of output speed sensor on 2003 Town and Country

The input and output speed sensors look identical on the connector side. The one over the solenoid pack is the input, the one closer to the left frame rail or left front wheel is the output sensor. I hope this helps.

Posted on Apr 26, 2009

  • 117 Answers

SOURCE: 2005 crank position sensor location

The crank shaft sensor on that model should be on the driver side towards the back of the tranny its not hard to get to.

Posted on Jun 27, 2009

  • 5081 Answers

SOURCE: how do you test the crank and cam sensors on 02


  1. Use the fluke meter.
  2. Unplug the sensor, and backprobe the connector.
  3. Theres 3 slots, you want A and B on the connector going TO the sensor- not TO the engine.

Normal resistance is 200ohms, +/- 75ohms.
275ohms to 125ohms...any higher or lower and it is recommended for replacement.


  1. Disconnect at sensor, key on.
  2. Voltage from terminal A to terminal C =4.5 to 5 volts.
  3. Reconnect, and backprobe sensor at B= 4.5 to 5 volts.
  4. Start engine, backprobe sensor at B -AFTER idle stabilizes-- .5 to 1.5 volts.

Posted on Dec 26, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Town and country 2000 crank but doesn't start.

I'm leaning more toward you feul pump and filter my friend, a 2000 town and country? Filter is underneth the drivers side and the pump is in the feul tank

Jan 28, 2015 | Chrysler Town & Country Cars & Trucks

2 Answers

Where would i get a diagram to show me where the crank sensor on my 1997 town and country van is

The crank sensor will be located on the back of that engine. By the starter. YouTube has a cool video about it.

Oct 03, 2014 | 1997 Chrysler Town & Country

1 Answer

2003 town and country changed plugs and wires and

did you replace the ignition coil? they do give you problem of skipping too.

Mar 13, 2010 | 2003 Chrysler Town & Country

1 Answer

I have a 2003 town and country wich wont start, all the lights, battery, stater in good condition. u only hear a clik on relays. cranks and run one time after that nothing.

check the starter again by banging on it with a hammer it could be defective starter if not check your crank shaft position sensor

Nov 01, 2009 | 2003 Chrysler Town & Country

1 Answer

Chrystler 2003 towwn and country won't run

Ignition switch is the most likely culprit.

Jun 15, 2009 | 2003 Chrysler Town & Country

Not finding what you are looking for?
2003 Chrysler Town & Country Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides