Question about 2001 BMW X5 3.0i
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
partially remove the desired light by remove the 4 8mm screws, two ont the top and two at bottom behing the light, pull the light out far enough that you can see the socket,you should be able to remove it at that point.You should also check the contact of the bulb as it is most likely burned or melting and has damaged the socket so you should replace he socket and bulb as the warning may still be present even though the bulb works.Also the rear tail lights have a corrosion and burning issue as well on the brake contacts.
Posted on Mar 29, 2010
no the spindle stays on the vehicle,this process is not that difficult.start by removing the wheels and 38mm nut at the end of each shaft,then reomve the bolt holding on the front lower control arm from the front sub frame,pressout the shaft through the wheel bearing,now that the end of the shaft is out use a pry bar to pop out the shaft in the oil pan,pull them out and replace, Also you must be aware that removeing the 38mm nut is difficult without a impact gun and it is also a 12 point nut as well you must force out the ends of the drive shaft with a special puller of a air chistle with a point as you are not able to push it through by hand good luck
Posted on Mar 30, 2010
Tips for a great answer:
Feb 19, 2015 | 2003 BMW X5
Jul 21, 2014 | 2005 BMW X5
Jul 07, 2013 | Cars & Trucks
Nov 08, 2012 | 2007 BMW X5 3.0si SAV
Jan 17, 2010 | 2007 BMW X5 3.0si SAV
Jan 08, 2010 | 2005 BMW X5
Sep 25, 2009 | 2005 BMW X5
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: