Question about 1994 GMC Sierra
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1990 GMC Sierra 4x4 1500
the connections near the front axle that activate the motor to engage the system aren't melted? That's a comon problem for that body style. If there good, sounds like it could be that motor itself. To figure out if it's you motor or transfercase, jack up the rear end, have a friend inside shift into 4 wheel drive, or try to, and put it in gear and apply some gas. If the front driveshaft is turning then it's something with the front end. If not, farther back in the system.
Posted on Sep 22, 2008
Check the switch on the transfercase remove the vacume lines if there is oil in them the switch has to be replaced and the lines should be cleaned out you should also check under the battery tray to make sure the boot is not ripped that controls the leaver to engage the front axel
Posted on Feb 16, 2009
I just fixed a friend of mines 96 yukon...shift to neutral press 4H and u can hear the actuator make noise (we even replaced it with a new one his idea and the same thing happen as old one), so as he hit the switch for 4H i layed under it (on 4 jack stands) and I could hear the motor on the transfer case make a loud noise (well thats working) and before all this I asked him did u check all your fuses (he said guarnteed to be all good) one night it was bothering me so i looked through the owner manual for the yukon and in the fuse box on driver side by the door there are (2) fuse for the 4wheel drive unit,pull one of the fuses good...pulled the other one and it was blown put in a new fuse and it works like brand new..pull fuse for anything that has to do with 4 wheel drive componants,
Posted on May 03, 2009
actually that first soultion is wrong it is correct on smaller pickups but on the full size pick ups they use a differnet sytem
there a electric actuator on front axle
there be two elctrical plugs on front axle u want the bigger of the two other one is just to turn the 4 wheel drive light on
un plug actuator then remove actuator after it removed plug it back in but leave it out of axle turn key on and shift down to 4 wheel drive the actuator should move out if it dont that your problem if i does move this isnt your problem it either the tranfer case or in front axle
Posted on Feb 08, 2010
Tips for a great answer:
Feb 09, 2014 | GMC Sierra Cars & Trucks
Nov 16, 2012 | 1993 Mazda Navajo
Aug 01, 2012 | 1993 GMC Sierra K1500
Mar 06, 2012 | 1993 GMC Suburban
Jan 12, 2011 | 1993 GMC Jimmy
Nov 28, 2010 | GMC Sierra 1500 Cars & Trucks
Dec 13, 2009 | 1999 GMC Jimmy
Nov 24, 2008 | 1993 Chevrolet C1500
38 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: