Question about 2004 Chevrolet Impala

Open Question

Why does the radio fuse keep blowing in my 2004 chevy impala

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: unlock antitheft code for 2004 chevy impala

Radios in the 2004 Impalas are tied to the vehicle's VIN through the computer, so it may be somewhat difficult to get the code. However, the following steps should work:

1. Press and hold the buttons for presets 1 & 4 (may be 2 & 3). The word "SEC" should show.
2. Press the "MIN" button. "000" should be displayed.
3. Press the "MIN" button again to have the second two numbers appear. Record these numbers.
4. Press the "HR" button for the first two numbers to appear. Record these numbers. -- Note: Your number sequence should be the numbers from the "HR" button followed by the numbers from the "MIN" button.
5. Call 1-800-537-5140. This will get you to the GM unlock code automated line. Ignore the prompt and enter "202108#". Next enter your code (remember, HR then MIN) followed by the * key. For example, 1234*. A 3 or 4 digit code will be given to you. If you get a code such as 0532, drop the zero when entering it into your radio.
6. Enter the code into the radio IAW the applicable manual.

Posted on May 30, 2008

  • 4 Answers

SOURCE: radio unlock coed for chevy impala

• A module which communicates on the class 2 serial data circuit which supplies VIN information to the radio is replaced and not properly setup with the correct VIN information for that vehicle. The only way to unlock the radio is by using a scan tool.

Posted on May 15, 2009

  • 295 Answers

SOURCE: Headlight wiring diagram for 2004 Chevy Impala

I would go to Alldata.com on line for your vehckle to get the wiring diagrams.

Posted on Jul 18, 2009

  • 6982 Answers

SOURCE: 2004 Chevy Impala no heat from defrost or heater

No heat is often a symptom of low coolant, usually followed by overheat. There are other controls that regulate heater, but right now, re-fill the cooling system with engine running and heater on high, then check for leaks (coolant you lost went somewhere...you need to determine where) Low coolant will damage your engine. Take care of that first, then if heater still does not work, then do diagnosis on that. (if you loose the engine heat won't matter, will it!)

Posted on Sep 22, 2009

Testimonial: "Very helpful! And I appreciate the input very much!"

ZJLimited
  • 17970 Answers

SOURCE: radio fuse box 2003 chevy impala

c00f856.jpg

c1f686a.jpg


Also can check other details in the 2003-Chevrolet-Impala-Owners-Manual

Hope this help (remember comment and rated this) TY for using Fixya.

Posted on Apr 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my blower continue to run in my 2004 chevy impala when i turn my car off?


Sounds like you have a shorted power wire to ground in your heater circuit.

Nov 22, 2016 | 2004 Chevrolet Impala

1 Answer

Why does my XM Radio fuse keep blowing in my 2011 chevy impala


for some reason that happend to me once and i had to connect my radio groud direct to ground instead of battery ground cable and that fixed the problem. good luck

Nov 27, 2014 | Chevrolet Chevy Cars & Trucks

1 Answer

2004 impala ls driver side heated seat repair problem. Passer side work. Could it b a fuse


yes, the heating element itself. you can try to get online and se if you can find the impedance spec and get a multimeter, and at the end of the harness, probe the terminals to get the impedance. if its out of spec, you will hav to get the element replaced. unless you are experienced, dont try it yourself. its a hard job!

Nov 15, 2013 | 2004 Chevrolet Chevrolet Impala

1 Answer

2000 chevy impala keeps blowing fuse for cig lighter and radio


You have a short or a defective cig lighter plug. Check with an ohms meter for continuity.

Jun 12, 2012 | 2000 Chevrolet Impala

1 Answer

2004 chevy impala....my brake light fuse keeps blowing...fine when you replace the fuse but then when you step on the brake it blows (the fuse that say BRK SW}


you have a short somewhere. if it is the brake switch fuse it is probably the brake switch which should somwhere on the pedal arm or actuated by the pedal arm. also check your bulbs if you haven't already. hope this helps.

Mar 25, 2009 | 2004 Chevrolet Impala

Not finding what you are looking for?
2004 Chevrolet Impala Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...