Question about 1999 Ford Contour

Open Question

Dash remove 99 contour heater vent peeled up at winshield how to fix

Posted by Anonymous on


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1244 Answers

SOURCE: 99 ford contoure heater fan will not work .

change the heater motor i bet ya its bad

Posted on Jan 18, 2010


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My Winshield Defrost Quit Working. Heater, AC, and vents all working except the windshield defrost.

I'd have to check actuator movement for defrost. The actuator is electric according to my database. The actuator should be under dash at end of hvac housing.

Dec 10, 2015 | 1989 Chevrolet C1500

1 Answer

Where is blend door located on a 99 ford contour 2.0l

Under the dash board buried deep inside the plastic housing of the heater/airconditioner venting controls consult a repair manual or youtube video for specifics.

Oct 09, 2015 | 1999 Ford Contour

1 Answer

Remove heater core on corsica

Heater core on a corsica is tricky. It's under the dash in the middle. First disconnect hoses under the hood. Then remove plastic panel 8mm bolts under dash. Remove bolts holding the clips that hold the heater core in place. To remove the heater core you must peel back the carpet or you will not be able to get it out and a new one in. Once it's out, put new one in the opposite way. The carpet has to be peeled back and heater core manouvered to get it in and out. Good luck

Oct 12, 2014 | 1991 Chevrolet Corsica

1 Answer

Heater vaccum line 1998 monte carlo

Hi sounds like the heater ducting under the dash has fallen off try checking that.Good luck

Jan 22, 2014 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

How do i change a leaking evaporator core.

the entire dash, door to door top to bottem has to be removed to be able to take out hvac housing so you can take apart to get at the core [recomend do heater core at same time] the dash comes out as an entire unit guages and all. bolts on ends under plastic covers,on top near winshield under vent trim.,bolts on floor in center below radio and a/c controlls,steering column has to come out. multiple wire connectors etc. its an all day job for a pro so its going to take awhile but its pretty straight forward

May 06, 2010 | 2000 Chrysler Grand Voyager

1 Answer


look under the hood and dash for broken vacuum lines as that is what as that is what actuates the air flow doors

Jan 06, 2010 | 1998 Ford Contour

1 Answer

Puff of smoke from crack between heater vent and dash

antifreeze i think,heater matrix leak ,try putting a rad leak stopper in

Jan 19, 2009 | 1998 Ford Contour

1 Answer

Heat don't workin 1998 for contour

Sounds as if your heat vent door is hanging up or blocked. When the car is completely warmed up and the heater is on, feel around under the dash near the heater system to see if you can feel any warm or hot air coming out.

Nov 18, 2008 | 1998 Ford Contour

Not finding what you are looking for?
1999 Ford Contour Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

79851 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides