Question about 1996 Mercury Sable

1 Answer

Where exactly is the orifice tube located on a 1987 Chevrolet G30 van?

Posted by on

Ad

1 Answer

The orifice tube is located inside the refrigerant line between the compressor and the evaporator, closest to the firewall.

Posted on Jun 11, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 82 Answers

SOURCE: Need to find location of orifice tube on my 1998

the orifice tube always goes in the high side , the thinner line, most of the times close to the evaporator...an easy way to find it is touch with your fingers the line ,in some place will be hot and in another cool , when it change from hot to cool there is the place, most of the time is close to the line connection , hope this help

Posted on Aug 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of orifice tube in 2000 chevy venture


best advice is the method i would use to located the orifice tube in the 2000 chevy venture. check the automotive repair book section in your local library. Most libraries have repair manuals on their automotive shelf section. find the a/c manual for your year and model car. make a copy of the page that has the information you need. you will need to make a copy because the library will not let those manuals be checked out. you might want to google for the location of the orifice tube location. I hope this helps.

Jun 18, 2014 | 2000 Chevrolet Venture

1 Answer

Where exactly is the orifice tube on a 1987 chevrolet g30 van?


Its a liquid line an start from condenser to evaporator. Following the small line you will find connection before the evaporator and the pipe have marks about 3 in.from the connection. Evacuate the freon and disconnect the pipe. You will need special tool to remove the office tube or nidell nose plier. Twist and pull till the orfice tube is out. If the tube brake insert long wood screw and pull . Worst case ask your auto parts store for repair kit. Is 5in. Replacement set. Cut the pipe and install the new one. Very carefully follow the direction of the new orfice tube. Vacuum the system and recharge.
Good luck

May 12, 2014 | 1996 Mercury Sable

1 Answer

1985 chevrolet G30 chevy van Winnebago Minnie Winnie


Locate the dipstick tube to check the trans oil and remove the dip stick and put the oil down the tube. Replace the dip stick and check the level when you think you have enough in the tranny. Hope this helps.

May 08, 2014 | 1985 Chevrolet Sportvan G30

1 Answer

Where is the low side port for recharging the a/c located at on a 1987 G30 van?


Normally the low side is the line from the dryer or round unit. Most recharge unit will only fit on the low side now days unless you are using actual gages to fill with. Hope this helps.

Jun 29, 2012 | 1987 Chevrolet G30

1 Answer

Where is the fuel filter on the 1983 Chevy g30 van?


My 1984 G30 Diesel has two filters. One is under the van below the side door on the passenger side. The other is under the engine cover inside the Van mounted to the engine itself it is rectangular.

Apr 03, 2012 | 1984 Chevrolet Sportvan G30

1 Answer

Can not locate ecm


Hi Joe:

On 1993 Chevrolet Truck G30 1 ton Van 8cyl the Engine Control Computer is located in front seat area, driver side, mounted under driver seat.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Dec 10, 2011 | 1993 Chevrolet G30

1 Answer

Diagram of connection of a G30 1986 van carburetor need vacumn hose connection diagram to reconnect carburetor with a 350 engine and quatro jet carburetor


I find this vacuum diagrams for 1986 Chevrolet Truck G30 1 ton Van 5.7L 4BL 8cyl (click over pic for zoom)...

zjlimited_515.jpg

Fig. 136: 1986 5.7L engine-Federal with automatic transmission (G10, 20 and 30 models)

zjlimited_516.jpg

Fig. 137: 1986 5.0L and 5.7L engines-California with automatic transmission (G10, 20 and 30 models)

zjlimited_517.jpg

Fig. 138: 1986 5.7L engine-Federal with manual transmission (G30 heavy duty models)

zjlimited_518.jpg

Fig. 139: 1986 5.7L engine-Federal with automatic transmission (G30 heavy duty models)

zjlimited_519.jpg

Fig. 140: 1986 5.7L engine-California with manual transmission (G30 heavy duty models)

zjlimited_520.jpg

Fig. 141: 1986 5.7L engine-California with automatic transmission G30 (heavy duty models)


Hope this helps; keep us updated.

Jan 20, 2011 | 1986 Chevrolet G20

1 Answer

Surge at idle


buy manual, check and reset tps, you will need cheap ohm meter

Sep 12, 2009 | 1987 Chevrolet G30

Not finding what you are looking for?
1996 Mercury Sable Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

fordexpert

Level 3 Expert

5520 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...