Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sounds like you should start by dropping the pan and changing the filter, put cheap fluid in it or reuse the old fluid if its not too bad bring it to a shop and have a transmission flush performed with a good flush machine your valve body is sticking and this should clear things up please rate -jeff
Posted on Sep 05, 2008
Assuming this is an automatic transmission, odds are you have lost a band in your transmission, this will require a rebuild, you may also notice it will fail to shift into high gear as well?
Posted on Oct 29, 2008
SOURCE: 2005 dodge magnum, no prior
What I did was dissasemble the shiftlinkage unit and pull the pink plastic cam and spring out that broke. this is only a temporary fix though because it means that anyone can get into your car press the brake and roll it away!!!
Posted on Nov 05, 2008
are you checking tranny fluid level.check condition of fluid if it look brown smells change tranny fluid and filter.fluid change dont help .you got pump and input clutch problems.
Posted on Apr 28, 2009
Tips for a great answer:
Jul 26, 2015 | 2005 Buick Rendezvous
May 09, 2015 | 2005 Buick Rendezvous
Aug 10, 2014 | 2005 Buick Rendezvous
Mar 29, 2014 | 2005 Buick Rendezvous
The Engine and Automatic Transmission (not applicable to manual transmissions) in this vehicles drive train are fully electronically controlled by a computer called the PCM and TCM (Power Train Control Module, Transmission Control Module). When a problem like this or other drive-ability related problems occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM. Also always check fuel pressure for correct spec for your make and engine type.
Oct 01, 2012 | 2005 Buick Rendezvous
Jul 22, 2011 | 2003 Buick Rendezvous
Jun 24, 2009 | 2005 Buick Rendezvous
Jan 17, 2009 | 2005 Buick Rendezvous
37 people viewed this question
Usually answered in minutes!