Question about 2008 Hyundai Getz 1.3

1 Answer

Do how 2008 getz stop light globe change

How do you change stop light globe

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 111 Answers

Hi there,

There should be a cover directly behind the light inside the tailgate., All you need to do is remove this cover and you will have access to the rear of the light socket. Twist the light out anti clockwise and the globe will come out. Refit in the reverse order.

If you find it hard try it this way >

holding the assembly together, and yes a screwdriver is what you will need along with a little pressure at each side once you have pried each joint to stop them from popping back together.

Posted on May 12, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I find the radio code for a Hyundai getz 2008 1.6


from your dealer need to notify them with vin and proof of ownership

Sep 07, 2016 | 2008 Hyundai Getz 1.6

1 Answer

Removal of 2008 hyundai getz engine


Watch the video's on Youtube
DIY Part Hyundai Elantra transmission engine swap 1 of 3 Removing the...


It is not an exact match but the procedure is typical.

Jun 28, 2016 | Hyundai Cars & Trucks

1 Answer

Changed third brake light to LED and the "Service Airbag" light came on control panel?


LED,s use different power consumption a normal globe. The brake lights on your car may use the same power supply as the airbag system. Try putting the original standard globe back in. If the airbag light goes out, then that will be the problem. you will not therefore be able to use the LED in that brake light.

Apr 13, 2015 | 2008 GMC Sierra 1500

1 Answer

How to change stop light globe on 2008 hyundai getz


Remove the two 10 mm (head) bolts that hold the stop light. This bolts are between the tail light assembly and the tail gate weatherstrip. You can see them without having to remove anything.

By using a masking tape wrapped flat screwdriver, pry "back" the whole tail light assembly. Once out, you can twist the brake light (or reverse, or turn signal) bulb plug, remove and replace the bulb.

The Getz uses standard two filament brake globes (1/4 turn to install).

May 12, 2014 | 2008 Hyundai Getz 1.6

1 Answer

Replacing wing mirror glass on hyundai getz


The only advise is to check out your Manual,

However here is a Video to change over Mirror glass

Dec 17, 2012 | 2008 Hyundai Getz 1.3

1 Answer

Where is the reverse light switch located on hyundai getz hatchback


Try underneath the car, The switch is located on the top right side of the transmission housing. the switch is located very close to the exhaust pipe.

Nov 20, 2012 | 2008 Hyundai Getz 1.6

1 Answer

Brake lights dont work fuse is fine and globes are fine


I suggest check brake light switch, generally is located top back side brake pedal (underdash).

Aug 20, 2012 | 2006 Hyundai Getz 1.6

1 Answer

How to change the spark plugs in a 2008 getz


To get too my 2008 Getz spark plugs. I used my socket set with an extension on the plug spanner provided with the inexpensive kit !

Jan 19, 2012 | 2008 Hyundai Getz 1.4

2 Answers

How to replace the front brake pads on a hyundai getz, 2008 1.4


Instead of explaining in words, here you find the right link to understand the disc barking system & how to relace the worn out pads.The link refers elantra, but the basic remains same for the GETZ.

http://www.cockeyed.com/lessons/brakeshoes/brakeshoes01.shtml

Jun 05, 2010 | 2009 Hyundai Genesis

Not finding what you are looking for?
2008 Hyundai Getz 1.3 Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...