Question about 2001 Nissan Maxima

Open Question

I have a 2001 nissan maxima my cr starts but wil not stay on

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

johnny5846
  • 379 Answers

SOURCE: location of a o2 sensor 2001 nissan maxima

bank 1 refers to the side of the engine that #1 cylinder is on , and sensor 2 refers to downstream , after the catalytic converter. , this link shows bank 1 on a 2001 nissan maxima V6 being on the firewall side . if you had a 4 cylinder it would be downstream after the catalytic converter .

http://www.autozone.com/N,26200242/shopping/specsSelect.htm



Posted on Jan 04, 2009

  • 416 Answers

SOURCE: 2001 nissan maxima gle crank no start code p1320...please help

Primary ignition fault. Reasons: Bad distributor cap (most likely) or ignition control module/ignition coil.
Hope that helps
Good Luck

Posted on Mar 18, 2009

  • 135 Answers

SOURCE: 2001 nissan maxima air condition fan not working

If the ac fan is not coming on the ac is inop. the compressor is bypassed. Check fuses and relays first.

Posted on Aug 04, 2009

  • 5 Answers

SOURCE: Air conditioner noise in 2001 nissan maxima

this maybe the motor on the fan or the bearings in the fan wearing out or the bearings in the a/c clutch

Posted on Sep 02, 2009

  • 1 Answer

SOURCE: 2001 nissan maxima se keeps blowing the ecm 1 fuse

Did you find the prolbem? Im having the exact same problem you have. Mine is doing it after it died and I replaced the starter but now it wont start and the fuse eng cont 1 keeps getting burned out instantly

Posted on Aug 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2001 nissan maxima wont start when its been sitting for more then 4 houres


you have electric power drain,either it is you battery very old and one of the shells inside the battery is short. Check also your boot light might stays on even you closing it down.

Nov 22, 2013 | 1996 Nissan Maxima

1 Answer

My battery light stays on 2001 nissan maxima


YOUR ALTERNATOR IS NO GOOD TRY UNHOOKING THE POSATIVE CABLE MAKING SURE NOT TO LET IT TOUCH ANY METAL SURFACES IF IT DIES TAKE ALT OFF ANDHAVE CHECKED TO CONFIRM HOPE THIS HELPS REPLY BACK

Sep 27, 2012 | 2001 Nissan Maxima

1 Answer

2001 nissan maxima se keeps blowing the ecm 1 fuse


Did you find the prolbem? Im having the exact same problem you have. Mine is doing it after it died and I replaced the starter but now it wont start and the fuse eng cont 1 keeps getting burned out instantly

Jun 25, 2010 | 2001 Nissan Maxima

1 Answer

Nissan Maxima 2001 - Vibration in low speed


Have the tires checked for a slipped belt.

May 26, 2009 | 1995 Nissan Maxima

1 Answer

ABS light stays on


that has four wheel anti lock so your gonna need to either take all them off and clean ends it may correct the problem but more than likely your gonna have to take to a large shop that has abs computer to find which sensor is bad then correct the problem

May 23, 2009 | 2001 Nissan Maxima

3 Answers

2001 nissan maxima gle crank no start code p1320...please help


Primary ignition fault. Reasons: Bad distributor cap (most likely) or ignition control module/ignition coil.
Hope that helps
Good Luck

Mar 18, 2009 | 2001 Nissan Maxima

1 Answer

Tire pressure.


The tire pressures to use are i your user manual that came in the glovebox. If you no longer have this, buy a 20 dollar manual, which I buy for every car I own and it wil tell you.

If you need an answer to get you by, use 35 psi until you find out exactly what it should be. You may even want to stay with this pressure, as most car manuals wil give you temps for winter and summer, and for different driving conditions, when 35 psi will serve you just fine. If you begin to notice your tir wear is not even, take it to a shop and find out what is wrong with it. You will probably need an alignment.

Also many tires wil tell you on the side, the safe tire inflation pressures, but I have found that 35 psi is a good number to run for just about any passenger car.

Dan

Jan 03, 2009 | 1997 Nissan Maxima

Not finding what you are looking for?
2001 Nissan Maxima Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...