Question about 2007 Ford Fusion 1.6
Driver door and right rear door wont lock with key fob. Inside driver door handle broke and has been replaced
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You will need to remove the door panel to gain access to the handle. Roll the window up or down as needed to get to the nuts that attach the handle to the door. You will also need to remove a rod the goes to the door lock. You will see the rod after the door panel is removed. Good luck.
Posted on Feb 18, 2009
use the fob and keep clicking unlock/lock button see if everything is moving.then try banging outside of the door about 6 inches from door handle while pressing unlock.has worked on some other cars like vw audi and vauxhall
Posted on Dec 30, 2009
This link is from the handle to the latch. The door panel has to be removed in order for this problem to be fixed. The linkage is inside the door panel, it is a small diamater metal rod called a link. If you do the job yourself be careful not to break the door panel. In a shop, the labor is 1 hour for the job & if any, parts will be a seperate charge.
Posted on May 08, 2010
Either the linkage connected to the handle has come off, or the piece on the handle inside has broken. You will need to remove the panel from the door and repair or replace the handle.
Posted on Mar 29, 2014
Tips for a great answer:
Jan 13, 2016 | Cars & Trucks
on Sep 18, 2015 | 2010 Ford Fusion Hybrid
Feb 13, 2015 | 2014 Ford Fusion
Oct 14, 2014 | 2010 Ford Fusion 1.6
May 12, 2014 | 2007 Ford Fusion I4 SEL Sedan
Mar 28, 2014 | 2009 Ford Fusion
Dec 28, 2013 | 2006 Ford Fusion
Aug 20, 2012 | 2006 Ford Fusion
Dec 22, 2010 | 2001 Ford Escape
Dec 30, 2009 | 2007 Ford Fusion I4 SEL Sedan
58 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: