Question about 2004 GMC Yukon

2 Answers

Whats wrong with my 2004 yukon when it doesnt turn right?

Power steering does not turn right. turns left ok. notice when you step on brake at a standstill steering wheel jumps left

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • GMC Master
  • 447 Answers

This sounds like a bad valve in the rack and pinon. I just had a simalar problem on a Mitsubishi .. I replaced the rack with a A1 Cardone rebuilt rack and it cured the problem.. Rebuilding a rack is a job better left to the pro rebuilders.. you can call the teck line for A1 cardone and ask them what they think.

Posted on May 12, 2014

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check or replace the power steering pump

Posted on May 15, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

VWdan
  • 114 Answers

SOURCE: 2003 yukon denali xl.

worn out hub bearing. do not drive anywhere but to get it fixed! Jack up grab wheel at 12 and 6 and rock it ,loose aint it.

Posted on Apr 24, 2009

  • 23 Answers

SOURCE: 2001 5.3 yukon with no power steering.

well your power steering pump could have went out, but crank it up take the lid off and look inside while someone turns the wheel and see if the fluid is moving around and then have them do it while its in park wile giving it some gas and check again to see if its moving if not its probably went bad

Posted on Jul 07, 2009

  • 538 Answers

SOURCE: power steering problem when turning right

I'm not sure if that truck has rack and pinion steering, or a steering sector. In either case, it sounds like you have stuck valve and the hydraulic pressure is fighting you, instead of helping you. When ever you turn the steering wheel the valve is supposed to move and direct the hydraulic oil pressure to help you steer. The valve is built into the sector or the rack and pinion, you may have to replace the assembly. There are companies that recondition those items so you might want to shop around.

Posted on Jan 09, 2010

  • 114 Answers

SOURCE: 2004 GMC Yukon xl......If I put left turn signal

That vehicle has all three switches attached to the same module. Spray a little wd-40 into the flasher switch. Sometimes the slide on the flasher switch gets a little sticky and won't allow the turn signal to work independently. If that isn't the case, there is a repair kit for that available on ebay. the module of course costs around three hundred to replace but could possibly be found at a boneyard for much less. Also, check ebay for that module. Hopefully the WD-40 will fix it. Good luck.

Posted on Apr 15, 2010

  • 1 Answer

SOURCE: 2004 GMC Yukon Steering Problem

I have a 2004 GMC Yukon. I am hearing knocking in the steering column, and my back left tire is making a clicking and knocking sound, can someone tell me what the heck it is????????

Posted on May 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have a 2004 yukon denali AWD and the steering is hard to turn to the right.


If left turns have power assist and right turns require effort, suspect internal steering box issue

Mar 17, 2016 | Cars & Trucks

1 Answer

No trailer Brake Lights right or left side


Try the specified fuses in the under hood fuse center. they are common to blow.

Mar 28, 2014 | 2004 GMC Yukon XL

1 Answer

2005 malibu I can't get the key to turn in the ignition switch. Is there something electrical that would be keeping the key from turning? Thanks


Not that I am aware of. The steering wheel can be holding the lock, you might try turning the wheel both directions while turning the key.
You might also try a spare key.

Jun 24, 2012 | 2005 Chevrolet Malibu

1 Answer

I have a 2004 Yukon that i'm having steering problems with. Appears to have no powersteering when turning left but turns to the right with no trouble


Check the fluid level first but i am convinced your electrical power steering motor has failed.There is no solution. Only replacing the pump.

Dec 30, 2010 | 2004 GMC Yukon

1 Answer

Turn signal light in left mirror


You have a bad ground connection at the rear light cluster Remove and clean them.Make sure all wires are connected.Hope that helps pippall.

Aug 11, 2009 | 2004 GMC Yukon

1 Answer

Chevy Venture bumps while applying brakes or after a turn.


2 POSSIBLE PROBLEMS, STEERING SHAFT WEAR. MORE IMPORTANT SAFETY WISE IS THE LOWER CONTROL ARM BUSHINGS. EASY FOR A MECHAINC TO SEE AND SHOULD CHECK ON A LIFT FOR A MINIMAL CHARGE.

Mar 22, 2009 | 2001 Chevrolet Venture

2 Answers

2004 GMC Yukon Steering Problem


I have the same problem, low speeds and only when i turn to the left, steering locks or jams, but only at low speeds, and parking lot manuevers. Will replace gear box, simple 3 or 4 bolts, and can easily be done in a drive way or home garage. Hope this helps! 90% its the gear box even if you have the right one already.
Tips** you should have the 680 gear box and not the old one (670 3 bolt patter). The 680 should have 4 bolts. But there are issues and may need to be replaced. I had a faulty one!

Dec 16, 2008 | 2004 GMC Yukon

Not finding what you are looking for?
2004 GMC Yukon Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...