Question about GMC Safari

1 Answer

How to set ignition timing?

Also tune-up specs list

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 1,147 Answers

Go to a Pep Boys and get a Hanes manual for that year vehicle.This manual will tell you everything you need to know about EVERTHING to do with whatever you need to know about your vehicle.Hanes pulls vehicles apart,every nut,bolt and clip,taking pix and explaining what they do.Then how to put back together and set.This would be easier than ME explain the procedure here.Have fun.

Posted on May 14, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition timing


Base timing should be set to stock specs and fine tuned from there.

Nov 08, 2015 | Cars & Trucks

2 Answers

How to get my dads 1977 dodge van tradesman no a/c but a strong 440 with new carb tune up new factory distr.


Tuning carburetors and setting timing - Allpar

www.allpar.com/fix/carb-tuning.html
Tuning carburetors on Chrysler, Dodge, and Plymouth vehicles. ... Warm the car upby driving it around for a bit, then connect the vacuum gauge to intake ...

Dodge 440 engine problem???? - RV-Coach Online

www.rv-coach.com/current_category.2178/.../forum_thread_full.html?...
Aug 4, 2005 - 100+ posts - ‎100+ authors My son has a 77 dodge powerwagon with 440. went to replace starter, ... I have changed out the carb, fuel pump,filtters, and coil. .... We have put in a new ignition module, spark advance (vacuum), coil, ... I have a dodge 1 ton Cary Van. ... Where can I find tuneup specs for the '80 440 engine, like plug gap, ...

Dodge carburetor fix: Part 1 - YouTube

? 4:24
www.youtube.com/watch?v=RRcxiDKjzdY
Oct 13, 2009 - Uploaded by 4x4maniac89
Mean Green's carburetor was all gummed up so I took it apart. ... Sometimes it just takes some fine tuning ..

Oct 30, 2015 | Dodge Cars & Trucks

1 Answer

Have 82 f100 with 3.8 motor when I let out clutch it bogs down ?


truck got tune up recently? good spark from each plug (ignition coil, distributor cap & rotor if equipped, spark plug wires), good fuel delivery, idle rpm & ignition timing set to specs? transmission turns freely?

Oct 07, 2015 | Cars & Trucks

1 Answer

Need tune specs on '89 5.7 GMC


Spark plugs are set at 0.035 inch.
Ignition timing is set at 0 degrees BTDC. The computer then controls the timing from there. There will be a wire that you unplug before you set the timing, then once you have verified that the timing is at 0 degrees, then reconnect the wire and you're done.

Apr 22, 2014 | 1989 GMC K1500

1 Answer

What is the ignition timing and total timing on a 87 chrysler new yorker


Total timing is not a spec that is given in a tune up guide. You can get this information free of charge from any parts store like NAPA

Jun 13, 2012 | Chrysler New Yorker Cars & Trucks

1 Answer

Tuning a '71 dodge demon 340. Plug gap 035? What are the timing specs? Demon not listed in dropdown menu so I selected Challenger. Thanks


Timing 5 degrees BTDC with vacuum off and plugged.
point dwell 27-32 with manual transmission.
" " 30-34 with automatic.
Point gap- .014-.019

May 18, 2011 | Dodge Challenger Cars & Trucks

1 Answer

5.9 dodge engine what is the stock setting for the ignition timing. is it TDC or is it advanced a few degress or detarded a few. If so how much


On the 5.9 360 the timing is non adjustable, don't try
to move the distributer to change it. Best thing to do is set it up at tdc and let the sensors and the pcm do
the fine tuning. The only timing specs I could find in
the repair manuals, are the marks on the gears for a
chain install. cam gear at 6:00 and the crank at 12:00
Hope this helps.

Mar 16, 2010 | 1996 Dodge Ram

1 Answer

Spark plug gap setting for a 98 range rover


what have you replaced with your tune up? should change plugs and plug wires, as well as the fuel filter, and air filter. the plugs should be set to factory spec.. be absolutely sure you've got the correct wires going to the correct plugs. the coil packs are a pain to get to but if all else fails, it may be time to replace them.

Sep 30, 2009 | 1999 Land Rover Range Rover

1 Answer

92 Camry, have to start several times before engine turns on, onl


weak fuel pump, clogged injectors, air or coolant temp sensors out of specs. Timing belt was put on wrong. Timing is off. Map sensor out of specs. You do have a light on. Fixing why the light is on may fix your problem.

Aug 06, 2009 | 1993 Toyota Camry V6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...