Question about 1999 Toyota Corolla

1 Answer

Toyota corolla problems

There is a click click sound from the rear left wheel when making a righthand turn, which seems to disappear once the wheel has straightened. Please help? What could it be?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I'm no mechanic but sounds like either a wheel bearing is going or gone, or could be your universal joint going on that side. not something to let go if it is either, as it could break and drop the car to the ground. please have it checked...soon!

Posted on May 12, 2014

Testimonial: "Thanks Deborah Taylor, I'm having it checked out tomorrow..."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Click click sound coming from left rear wheel when making a right turn


this is an indication of badly worn CV joints. Replace both because the other side will not be far behind it.

May 12, 2014 | 1999 Toyota Corolla

2 Answers

My toyota corolla 2005makes loud roar noise. not as bad at 65mph. when turn to the left it no loud


If it isn't the tire and it changes when you turn, I would suspect the wheel bearings.

Dec 15, 2012 | 2005 Toyota Corolla

1 Answer

I have a 2000 Model 2.0D toyota Corolla which is in excellent condition with no problems except when i press the brake at medium and above speed, the car swings , front portion left and rear portion...


Hi Hassan,
Seems the most likely cause of your problem is the adjustment of the rear brakes. There are automatic adjusters which sometimes become seized with rust or dirt build up. Jack up thr rear of the vehicle, and place the vehicle on chassis stands then lower the car onto the stands. Remove the rear wheels, release the park brake and remove the drums. (Sometimes these are secured with machine screws, sometimes just held in position by the wheel nuts. Pull off the drums and then check the adjusters. A very very very tiny squirt of WD40 will probably fix the problem. Make sure that the liners (brake shoes) haven't been contaminated by the spray (if they have wipe off and clean with abrasive paper) before assembling. Re assemble and then using the hand brake and asking a friend with good hearing to assist you, pull to highest point and release. Ask your friend to listen for clicking sounds from both rear wheel assemblies. That action will have to be repeated many times until the clicking stops. If you there is no clicking the adjustment assembly will have to be taken off and serviced or replaced. That is a far more complicated job. Let me know if you intend doing that yourself and if you require assistance. If so we'll do it together.
Regards Johngee10

Mar 09, 2011 | Toyota Corolla Cars & Trucks

3 Answers

Toyota corolla 1.6 gli suqeaks when slow cornering


Jack the car up on the left. Once clear of the ground hold the wheel top and bottom at the 12 o'clock and 6 o'clock and check for play by pulling out at the bottom and pushing in at the top and then the other way around. Any movement indicates a loose or worn wheel bearing. To make doubly sure remove the wheel and again check for play in the disc again in the north to south direction. Spin the disc and listen for complaint from the bearing. Hold the disc East/West (3 o'clock, 9 o'clock) and rock back and forward and check for movement against the track rod (steering end) arm. Tighten the central nut on the hub to the point at which resistance to the ability to rotate the disc is felt. Slacken off the nut just a fraction until to regain freedom of disc rotation. Any noises of complaint from the bearing or points of stiffness when the disc is rotating usually indicates that the bearing should be renewed. Now do the same procedure to the right wheel on the other side and make a mental comparison. It is rare for two wheel bearings to go at the same time and so the comparison will serve to highlight a faulty bearing by being markedly different.

Apr 21, 2010 | 2005 Toyota Corolla

1 Answer

1990 toyota corolla - knocking (clattering) when turning to the left - sounds like coming from wheel, but then it sounds like it coming from middle of car -


check your cv axles, then check your wheel bearings on both axles by lifting car and shaking you tire left to right, up and down. if there is free play you need to replace front wheel bearings

Feb 19, 2010 | 1990 Toyota Corolla

1 Answer

2003 Toyota Corolla Wheel Alignment


The specs are what the manufacturer recommends for the vehicle when it leaves the factory. However that means with the original tires and condition. The caster is not adjustable on a Corolla, so if the vehicle pulls even with the tires switched, there is a possibility there is damage to the strut or steering parts. However, before changing anything, check all tire pressures and make sure the brakes are in good condition. A brake that is not releasing properly will cause a pull to that side. Individual toe is rather meaningless - the total toe is what is measured. You have no king pins on a Toyota so you will not have KPI.

Oct 31, 2009 | 2003 Toyota Corolla

1 Answer

1998 Toyota Corolla Electric Door Lock Problem


You'll need to replace the solenoid (motor) that doesn't work. Not hard once you get the door panel off. I suggest you buy the correct part, not a universal one.

Jun 12, 2009 | 1998 Mitsubishi Eclipse

Not finding what you are looking for?
1999 Toyota Corolla Logo

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...