What do I need to do to fit a dump valve on a 1.7dti corsa van? please help with what is required etc. Thanks!
Unplug electrical connection to valve. Unbolt old one, remove, attach new one, bolt up. Reattach electrical connector.
Suggest you get a workshop manual, they are cheap enough on eBay
SOURCE: how do i get air bubbles out of my water on a opel corsa 2007 utility pls help
if there are air bubbles while the engine is running it means your head gasket is blown.
SOURCE: How to replace fan belt Opel Corsa Utility 1.4
Hi all,
I think I
must share my experience. The last time the timing belt was replaced on my car
(Corsa B 1.4 Swing 1993) was in 2004, and I got it changed today. Meaning after
9 years! The car drive 36,000KM during these 9 years, mostly short distances,
and was rarely driven for more than 1.5 hours at a time. But the car was used
almost every day! I read on so many forums like this, that the timing belt for
Corsa B should be replaced after 4 years in any case. Well, this is certainly
not true. I may have driven easily for two more years, but just got it replaced
for safety. By the way, I live in North of Norway, where average winter
temperature is -10 C, and average summer temperature is +10 C. So my advice to
those who have Corsa B 1.4 Swing, and do not drive the car for long distances,
should not worry about changing the timing belt for at least 7 years!
However,
when you do replace the timing belt, I suggest that you get these parts replaced
as well
-Complete
timing belt kit, and not only the belt!
-Fan
belt/dynamo belt/serpentine belt (whatever it is called on your car)
-Thermostat
-Two Seals
(front camshaft, and oil seal/axel seal) (not sure about the exact names of
these seals, but ask the mechanic!)
-Coolant
-Waterpump
Good luck!
Massao
623 views
Usually answered in minutes!
×