Question about 1996 Isuzu Rodeo

Open Question

Ajustment for ac belt - 1996 Isuzu Rodeo

Posted by Anonymous on


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 8564 Answers

SOURCE: ac is there a idler

Yes, there is an adjuster pulley. See pics below.

4-cyl engine:

6-cyl engine:

Posted on Jun 18, 2011


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Install ac belt--how to ajust tension pully

What engine?

It should have an automatic tensioner for the serpentine belt. If the tensioner does not automatically rotate and take up the slack in the belt than it is bad and needs to be replaced.

Sep 26, 2010 | 1999 Plymouth Voyager

1 Answer

Where is the serpentine belt ajuster

here is a picture, but it is on the front of the engine and is sporing loaded, u can see the arm of the automatic adjuster move/jitter when the engine is running at idle, turn the AC on and off to really see it move to take up the load slack.


Aug 23, 2010 | 2004 Dodge Grand Caravan

1 Answer

How to replace pwr steering belt rx300 //which bolts to loosen and where? Already got info on ac/alternator belt. Thanks

on the power steering unit the bolts that hold the unit to the engine,one is abolt through the flange the ajuster bolts through a long slotted plate which allows the unit to move out to tighten up the belt

Jul 05, 2010 | 2000 Lexus RX 300

1 Answer

How do i replacen the belts on the pullys

On 1.8 engines. Loose the belt ajustment next to the power steering pump and remove the belt. There is nut holding this ajustment screw, For the one that goes into the Alternator loose the ajustment underneath the alternator, You dont have to remove any bolts on the Alternator or Power steeing pump. (To prevemt noise make sure you replace with Gates belts instead of Nissan.)

Oct 26, 2009 | 2005 Nissan Sentra

1 Answer

I had the belt and pulley come off and loss them on road somewhere it is the belt going to the ac copmp. where can i buy the pulley and or the whole part that mounts under not on the a/c comp. i can get...

A local parts store should have the idler and the belt. If it wasn't the tensioner your lost then yes, the belt is self sdjust once installed withh all the idlers and tensioner in place. Good Luck, Ned

Sep 13, 2009 | Plymouth Grand Voyager Cars & Trucks

1 Answer

2003 chryler concord ltd 3.5l engine ac belt replaced

Sounds like the tensioner bearing is frozen, not turning at all. You need to remove the belt and see if it spins.

Aug 14, 2009 | 2002 Dodge Intrepid

2 Answers

Need diagram showing how to install belt belt came off need to know how it go on and how to ajust it

first jack up the right front tire side of your car and remove cover under your car motor, so you can see your pulleys from underneath your car, remove black cover where your timing chain belt is thats on the top center between alternator and powersteering pulleys, ok,looking at all your pulleys from your right side of your front end, starting from your top left is your alternator pulley,put belt on it and go underneath the motor mount to your right top powersteering pulley,then go down around the bottom right ac pulley,then to your left bottom crankshaft pulley,the back side of the belt thats on your top alternator pulley wraps around the soft edge pulley thats above your center waterpump pulley,then wrap around the idler pulley that's under your top alternator pulley,then wrap the backside of your remaining belt around the tensioner pulley that's in on your right, under your top ac pulley, use a 13 mm wrench to adjust by turning towards the back of your car so you can slide the belt on

alt ps

soft edge

idler wp tensioner

cs ac

Jul 12, 2009 | 1999 Ford Escort

2 Answers

Squeaking noise when i turn on AC

sounds like the drive belt or the compressor motor drive shaft or bearings need to be lubricated... hope this helped...

Apr 07, 2009 | 2001 Dodge Durango

Not finding what you are looking for?
1996 Isuzu Rodeo Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides